Re: Тестирование Новых возможностей BEST'a
#28
1. X3 прошит из DEAD (пришел убитым при прошивке)
Как ни странно, но Phoenix его не подцепил...
Код:
Files Set for Flashing :
MCU : rm540__08.40.mcusw
PPM : rm540__08.40.ppm_i
CNT : rm540__08.40.image_i_0582083_003
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600000001020C192102054100
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 17100012821B00494BAC9EBF62901FBCE79C1898
ASIC MODE ID: 00
ROOT KEY HASH: 7B045400E1752022F9EB80B0DEA9C65D
ROM ID: 67E82268F29CEA60
Use RAP3Gv40_2nd.fg
Processing RAWLOADER...
Preboot Ok
FLID : 003000EC
Use RAP3Gv40_XSR17_alg.fg
Boot Done! :)
Reopening the connection...
Waiting for response: 30
ADL: Check mode
ADL: phone is in flash mode
===Flashing [MCU]===
Erase : Processing rm540__08.40.mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
Write : Processing rm540__08.40.mcusw
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [MCUSW1]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [ISA+DYNSW]
Total writen 124 blocks
MCU Write done
===Flashing [PPM]===
Erase : Processing rm540__08.40.ppm_i
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
Write : Processing rm540__08.40.ppm_i
Total writen 24 blocks
PPM Write done
===Flashing [CNT]===
Erase : Processing rm540__08.40.image_i_0582083_003
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
Write : Processing rm540__08.40.image_i_0582083_003
Total writen 51 blocks
CNT Write done
ADL: Close_Session
Content: 00000000000000000000
ADL: Reboot
Flashing done... Reboot phone now...
Reading Phone Info....
Connected phone - Nokia X3-00
Software Info: V 08.40 25-05-10 RM-540 (c) Nokia
IMEI: 35377004********
PPM version :
Product code: 0580753
Read Info Done!
Checking User Certificates...
Total - 34 certs
Data exist, skip certificate repair...
AfterFlash operations done... Reconnect, wait...
Done!
2. Также прошит 5228
правда смутило то, что BEST его определил как 5232
а также ошибки в конце прошивки
Код:
Reading Phone Info....
Connected phone - Nokia 5232
Software ver : V ICPR72_10w21 26-05-10 RM-625 (c) Nokia
IMEI : 35271504*******
Ape Ver : V 21.1.004
APE Var : V 21.1.004V 21.1.004 V 21.1.004
APE ADSP: 256
DSP Ver : ICPR72_10w16p1
APE Test: rm625_ENO_x_09wk43v0.050
PPM :
CNT : v 001_000 11-05-10 vanilla RM625
Product SN : 00BF4A5AA
Product code : 059B954
Base Prd.code: 0587948
Module code : 0204424
Long Prod.SN : 0
Hardware info=======
HWID : 0201
Retu : 16
Tahvo : 22
Batery: 3711 mV
Camera:
CMT BT:
APE BT: HCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12708.
APE HW: 256
LCDVer:
RF ic :
Lock info ===========
IMEI : 35271504*******
IMEI spNet : 3A 25 17 05 14 13 64 09
IMEI svNet : 33 25 17 05 14 13 64 09 F6
Conf key : 0000000000000000
Provider key : 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7
LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
CRT308 Backup Created... :)
User code : Crypted
MMC pwd : no any record found
Done!
Phone disconected!
Connect phone on selected interface...
Phone found!
Series 40 Device detected!
read info... - Ok
Files Set for Flashing :
MCU : RM-625_21.1.004_prd.core.C00
PPM : RM-625_21.1.004_prd.rofs2.V05
PPM2 : RM-625_21.1.004_C01_prd.rofs3.fpsx
CNT : RM-625_21.1.004_001_000_U001.uda.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Manual mode selected
Backup CRT308 data...
CRT308 Backup Created... :)
Check communication with phone....
ADL req restart
Communication verify done... Preparing...
Gathering phone info...
Check communication with phone...
Batery valtage : 3728 mV
-> Batery voltage less, than 3,8V (3728mV). Continue at user risk
Reboot....
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600010006400C192101051105
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 1F4001139D9B0052EAA22D9303F260AE91DE7C75
ASIC MODE ID: 00
ROOT KEY HASH: B8C3ADECFC997FCD8081D3DEAF870B8C
ROM ID: 4B9B75103E691FF8
PatchRAWLoader: Patched OK
Processing RAWLOADER...
Processing UPDAPP...
Processing UPDAPP...
Processing PAPUBKEYS...
Processing UPDAPP...
Boot Done! :)
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL -> [2nd] changing...
ADL Server confirm flashmode!
ADL : Auth done...
ADL : ASIC CMT select Ok
===Flashing [MCU]===
Erase : Processing RM-625_21.1.004_prd.core.C00
Partitioning : Ok [5]
Found 4 areas to erase
Erasing area 0x00040000 - 0x00082FFF, NAND, CMT
Result: 0000
Erasing area 0x00083400 - 0x003FFFFF, NAND, CMT
Result: 0000
Erasing area 0x00800000 - 0x00D5FFFF, NAND, CMT
Result: 0000
Erasing area 0x00D60000 - 0x09E5FFFF, NAND, CMT
Result: 0000
Erase partition 0x0A
Partition erase Ok
Write : Processing RM-625_21.1.004_prd.core.C00
Total 387 [387/0/0] blocks to write, writing...
CMT : Writing Hash CERT [ADA]
CMT : Writing Hash CERT [KEYS]
CMT : Writing Hash CERT [PRIMAPP]
CMT : Writing Hash CERT [RAP3NAND]
CMT : Writing Hash CERT [PASUBTOC]
CMT : Writing Hash CERT [PAPUBKEYS]
CMT : Patch PAPUBKEYS
CMT : Writing Hash CERT [SOS*UPDAPP]
CMT : Writing Hash CERT [SOS*DSP0]
CMT : Writing Hash CERT [SOS*ISASW]
CMT : Writing Hash CERT [SOS+CORE]
CMT : Writing Hash CERT [SOS+ROFS1]
MCU Write done
===Flashing [PPM]===
Erase : Processing RM-625_21.1.004_prd.rofs2.V05
Found 1 areas to erase
Erasing area 0x06CE0000 - 0x0915FFFF, NAND, CMT
Result: 0000
Write : Processing RM-625_21.1.004_prd.rofs2.V05
Total 110 [110/0/0] blocks to write, writing...
CMT : Writing Hash CERT [SOS+ROFS2]
PPM Write done
===Flashing [PPM2]===
Erase : Processing RM-625_21.1.004_C01_prd.rofs3.fpsx
Found 1 areas to erase
Erasing area 0x09160000 - 0x09E5FFFF, NAND, CMT
Result: 0000
Write : Processing RM-625_21.1.004_C01_prd.rofs3.fpsx
Total 28 [28/0/0] blocks to write, writing...
CMT : Writing Hash CERT [SOS+ROFS3]
PPM Write done
===Flashing [CNT]===
Erase : Processing RM-625_21.1.004_001_000_U001.uda.fpsx
Found 1 areas to erase
Erasing area 0x09E60000 - 0x0F47FFFF, NAND, CMT
Result: 0000
Write : Processing RM-625_21.1.004_001_000_U001.uda.fpsx
Total 23 [23/0/0] blocks to write, writing...
CNT Write done
=================
ADL : End flashing
ADL : Finalize...
Flashing done... Reboot phone now...
Reading Phone Info....
Connected phone - Nokia 5232
Software Info: V ICPR72_10w21 26-05-10 RM-625 (c) Nokia
IMEI: 35271504*******
Ape Version: V 21.1.004
PPM version :
Product code: 059B954
Read Info Done!
Settings After Flash Defaults...
ProductTuneSet...OK!
SwUpgradeSet...OK!
Checking User Certificates...
Total - 0 certs
Uploading certificates...
BLK write error!!!
Error write : Baltimore CyberTrust Mobile Root
BLK write error!!!
Error write : Class 3 Public Primary Certification Authority
BLK write error!!!
Error write : Class 3 Public Primary Certification Authority - G2
BLK write error!!!
Error write : Class 4 Public Primary Certification Authority - G2
BLK write error!!!
Error write : Equifax Secure Certificate Authority
BLK write error!!!
Error write : Equifax Secure Global eBusiness CA-1
Writen 15 certs!
AfterFlash operations done... Reconnect, wait...
Done!
3. прошит 3720 (вроде без нареканий)
Код:
Reading Phone Info....
Connected phone - Nokia 3720c
Software ver : V 10.16 07-12-09 RM-518 (c) Nokia
IMEI : 35153904*******
Ape Ver :
APE Var :
APE ADSP:
DSP Ver : ICPR81_09w37
APE Test:
PPM : V 10.16 07-12-09 RM-518 (c) Nokia B
CNT : Content: b_grey V 10.16 07-12-09 RM-518 (c) Nokia
Product SN : KCW662873
Product code : 0580850
Base Prd.code: 0574243
Module code : 0204321
Long Prod.SN : 0
Hardware info=======
HWID : 1002
Retu : 16
Tahvo : 22
Batery: 4126 mV
Camera:
CMT BT: 410B-v170
APE BT:
APE HW:
LCDVer: SEIKO
RF ic :
Lock info ===========
IMEI : 35153904*******
IMEI spNet : 3A 15 35 09 44 89 84 07
IMEI svNet : 33 15 35 09 44 89 84 47 F2
Conf key : 0000000000000000
Provider key : 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7
LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
CRT308 Backup Created... :)
User Code : 12345
MMC pwd : no any record found
Done!
Files Set for Flashing :
MCU : rm518__10.16.mcusw
PPM : rm518__10.16.ppm_i
CNT : rm518__10.16.image_i_by_md_grey
Flashing phone now...
Check files done...
-> SWversion check skipped : Manual mode selected
Backup CRT308 data...
CRT308 Backup Created... :)
Getting product info...
RAP_BOOT: 0803000302010000
RAP_PUBLIC: 23A0000B996D015651285C824CCEDD3FA20CED81
CMT_ROOTKEY: 9DDBFCFE6E73CED7D8C6268C8EB85723
RAP_PAPUBKEY: 649FB9FA3B26D5538A86100744A489436F78B693
Checking CNT sector PN<>FL
PN CNT sector : 128 kb
ConvertImage: Processing rm518__10.16.image_i_by_md_grey
ConvertImage: Page Size is 128K, no need convert
Loader len: 430464, CHK: C0A9
ADL -> Sending loader...
Update Server code succesfully sent to phone!
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
Waiting for response: 28
Waiting for response: 27
ADL -> [2nd] changing...
ADL Server confirm flashmode!
ADL : Check data
ADL : Data accepted
ADL : ASIC CMT select Ok
===Flashing [MCU]===
Erase : Processing rm518__10.16.mcusw
Found 8 areas to erase
Erasing area 0x00000000 - 0x0001FFFF, NOR, CMT
Result: 0000
Erasing area 0x00040000 - 0x0005FFFF, NOR, CMT
Result: 0000
Erasing area 0x00060000 - 0x0007FFFF, NOR, CMT
Result: 0000
Erasing area 0x00080000 - 0x0015FFFF, NOR, CMT
Result: 0000
Erasing area 0x00160000 - 0x0023FFFF, NOR, CMT
Result: 0000
Erasing area 0x01540000 - 0x0171FFFF, NOR, CMT
Result: 0000
Erasing area 0x00240000 - 0x0153FFFF, NOR, CMT
Result: 0000
Erasing area 0x020E0000 - 0x0241FFFF, NOR, CMT
Result: 0000
Write : Processing rm518__10.16.mcusw
Total 1488 [1488/0/0] blocks to write, writing...
CMT : Writing Hash CERT [NOLO]
CMT : Writing Hash CERT [KEYS]
CMT : Writing Hash CERT [PRIMAPP]
CMT : Writing Hash CERT [PASUBTOC]
CMT : Writing Hash CERT [PAPUBKEYS]
CMT : Patch PAPUBKEYS
CMT : Writing Hash CERT [UPDAPP]
CMT : Writing Hash CERT [DSP0]
CMT : Writing Hash CERT [MCUSW]
CMT : Writing Hash CERT [ISA+DYNSW]
MCU Write done
===Flashing [PPM]===
Erase : Processing rm518__10.16.ppm_i
Found 1 areas to erase
Erasing area 0x01720000 - 0x020DFFFF, NOR, CMT
Result: 0000
Write : Processing rm518__10.16.ppm_i
Total 425 [425/0/0] blocks to write, writing...
PPM Write done
===Flashing [CNT]===
Erase : Processing rm518__10.16.image_i_by_md_grey
Found 2 areas to erase
Erasing area 0x02420000 - 0x027BFFFF, NOR, CMT
Result: 0000
Erasing area 0x027C0000 - 0x03FBFFFF, NOR, CMT
Result: 0000
Write : Processing rm518__10.16.image_i_by_md_grey
Total 608 [608/0/0] blocks to write, writing...
CNT Write done
ADL : End flashing
Flashing done... Reboot phone now...
Reading Phone Info....
Connected phone - Nokia 3720c
Software Info: V 10.16 07-12-09 RM-518 (c) Nokia
IMEI: 35153904*******
PPM version :
Product code: 0580850
Read Info Done!
Settings After Flash Defaults...
ProductTuneSet...OK!
SwUpgradeSet...OK!
Checking User Certificates...
Total - 34 certs
Data exist, skip certificate repair...
Set phone to Normal mode...
AfterFlash operations done...
Done!