Re: Пожелания и предложения команде BB5 Easy Service Tool
#94
E66 RM-343 флешинг:
Цитата:
Files Set for Flashing :
MCU : rm343_500.21.009_prd.c00
PPM : rm343_500.21.009_prd.v05
CNT : rm343_500.21.009.01U
APE : RM343_ENO_0741.10_08wk42.a26.fpsx
CNT3 : dawn_erase_y_drive.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600010006400C192101031103
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 1F800106D0D98A52D6106B3A6B85ED63C8E6E189
ASIC MODE ID: 00
ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: 4B9B75103E691FF8
PatchRAWLoader: Patched OK
Processing RAWLOADER...
Processing UPDAPP...
Processing UPDAPP...
Boot Done! 
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL Server confirm flashmode!
ADL : ASIC CMT select Ok
===Flashing [MCU]===
Erase : Processing rm343_500.21.009_prd.c00
Partitioning : Ok [7]
Found 3 areas to erase
Erasing area 0x00040000 - 0x007FFFFF, NAND, CMT
Result: 0000
Erasing area 0x00A00000 - 0x0759FFFF, NAND, CMT
Result: 0000
Erasing area 0x0F1C0000 - 0x0F8BFFFF, NAND, CMT
Result: 0000
Partition erase Ok
Write : Processing rm343_500.21.009_prd.c00
Total 595 [595/0/0] blocks to write, writing...
CMT : Writing Hash CERT [ADA]
CMT : Writing Hash CERT [KEYS]
CMT : Writing Hash CERT [PRIMAPP]
CMT : Writing Hash CERT [RAP3NAND]
CMT : Writing Hash CERT [PASUBTOC]
CMT : Writing Hash CERT [PAPUBKEYS]
CMT : Patch PAPUBKEYS
CMT : Writing Hash CERT [SOS*UPDAPP]
CMT : Writing Hash CERT [SOS*DSP0]
CMT : Writing Hash CERT [SOS*ISASW]
CMT : Writing Hash CERT [SOS*CORE]
CMT : Writing Hash CERT [SOS+ROFS]
MCU Write done
===Flashing [PPM]===
Erase : Processing rm343_500.21.009_prd.v05
Found 1 areas to erase
Erasing area 0x05420000 - 0x0759FFFF, NAND, CMT
Result: 0000
Partition erase Ok
Write : Processing rm343_500.21.009_prd.v05
Total 253 [253/0/0] blocks to write, writing...
CMT : Writing Hash CERT [SOS+ROFX]
PPM Write done
===Flashing [CNT]===
Erase : Processing rm343_500.21.009.01U
Partition erase Ok
Write : Processing rm343_500.21.009.01U
Total 127 [127/0/0] blocks to write, writing...
CNT Write done
===Flashing [APE]===
Erase : Processing RM343_ENO_0741.10_08wk42.a26.fpsx
Write : Processing RM343_ENO_0741.10_08wk42.a26.fpsx
Total 18 [18/0/0] blocks to write, writing...
CMT : Writing Hash CERT [SOS*ENO]
APE Write done
===Flashing [CNT3]===
Erase : Processing dawn_erase_y_drive.fpsx
Found 1 areas to erase
Erasing area 0x0F020000 - 0x0F1BFFFF, NAND, CMT
Result: 0000
Write : Processing dawn_erase_y_drive.fpsx
No any data for write, skip write
CNT Write done
=================
ADL : End flashing
ADL : Finalize...
Flashing done... Reboot phone now...
Flashing Failed!  Maybee HW error, or Downgrade try???!
Connect phone on selected interface...
Elapsed: 0:04:41
Connect phone on selected interface...
|
Вроде без проблем. Правда ТА сам по железу не исправен похоже.
Было бы не плохо таймер прикрутить на манер ATF.
А нет, поторопился я. После прошивки этот ТА через Cyclone по FBUS он в моды падает и работает, а после прошивки BEST'ом по USB нет.