COM7 [VCP0] selected
module  v3.11
Device: Autodetect 6228-6239 NAND
Checking data, wait...
Action: write flash NAND
write: Firmware
GP2810_PCB01_GPRS_MT6235_S01.GP2810V10_08_40_V1_1T06D090417__fullflash_20100130-143628.B4M.bin
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
nfi area detection...
external bootloader is not present
bootloader version: GP2810_BOOTLOADER_V005_MT6235_GP2810V10_08_40_V1_1T06D090417.bin
nfi area detection finished: Ok
"format ffs" active
interface: BROM_DLL_v3.952.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8A04:8A01
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0007]: 00EC:00F100000095 [SAMSUNG] K9F1G08X0M
chip size: 128Mb
page/spare size: 0800/0040
pages/block: 0040
bits i/o: 08
address cycles: 04
internal RAM size: 00010000
external RAM: absent
done
Set baudrate (921600)...
done
ram test...
testing...
ram test passed
===>  detect existing firmware structure...
detect ffs...
ffs offset/size: 02000000/06000000
firmware size: 32Mb
ffs size: 96Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: GP2820V10_08_40_V1_1T03D090808
detect NAND info...
number of areas to read: 1
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
external bootloader is not present
bootloader version: GP2820_BOOTLOADER_V005_MT6235B_GP2820V10_08_40_V1_1T03D090808.bi
nfi area detection finished: Ok
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
number of areas to read: 1
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
number of areas to read: 1
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
startup code area #1 is invalid
startup code area #1 detection done
rom info ver: 05
sw version: GP2820_PCB01_GPRS_MT6235B_S01.GP2820V10_08_40_V1_1T03D090808.BIN
project-id: GP2820V10_08_40_V1_1T03D090808, 7866B29E
code offset: 00000000
ffs offset/size [01]: 02000000/06000000
rom info structure: 2nd [enhanced] generation
TCL-ID is absent
===>  done
nfi area detection...
external bootloader is not present
bootloader version: GP2810_BOOTLOADER_V005_MT6235_GP2810V10_08_40_V1_1T06D090417.bin
nfi area detection finished: Ok
startup code area #1 check...
rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\id.00006235.[GP2810_PCB01_GPRS_MT6235_S01.GP2810V10_08_40_V1_1T06D090417.BIN_168E0BEC].rpl
rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\id.00006235._GP2810_PCB01_GPRS_MT6235_S01.GP2810V10_08_40_V1_1T06D090417.BIN_168E0BEC_.rpl
rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\id.00006235.[GP2810_PCB01_GPRS_MT6235_S01.GP2810V10_08_40_V1_1T06D090417.BIN_168E0BEC].rpl
rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\id.00006235._GP2810_PCB01_GPRS_MT6235_S01.GP2810V10_08_40_V1_1T06D090417.BIN_168E0BEC_.rpl
====================
warning: unknown rom info structure: GP2810_PCB01_GPRS_MT6235_S01.GP2810V10_08_40_V1_1T06D090417.BIN_168E0BEC
Unknown firmware detected (v.3.11, database date: ), user action required:
1. download latest software from support area and try again
2. if no still luck follow the next procedure:
- find good working phone with the same firmware:
  GP2810_PCB01_GPRS_MT6235_S01.GP2810V10_08_40_V1_1T06D090417.BIN
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to http://rapidshare.com or http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)
- be little bit patient and wait update
====================
error: startup code area #1 can't be fixed
You can flash phone now but can not finalize it.
In most cases phone CAN NOT power-on.
Do you want to continue anyway ?
number of cores: 3
loading files...
number of areas: 3
done
write...
write bootloader...
.
write core...
Format (HW_STORAGE_NAND)...
Disconnect...
done
Finished, time used: 8 min 46 sec
Remove/Install battery now