Phoenix Service Software - 2009.34.10.40495
02.12.2009

This Phoenix Service Software installation package includes following SW
components:

- Phoenix Service Software 2009.34.10.40495
- DK2 Dongle Driver v 7.14.0.25
- Nokia Connectivity Cable USB Driver v 7.1.17.0 (for Win2000 driver
version 6.85.15.0)
- Flash Update Package 09.044.022
- FLS-x Dongle Driver v 2.09.28
- FPS-11 version 5.10.0

Error corrections & changes:

- Corrections & changes to DCT-4 IMEI / ESN rebuild procedure
- Please note that depending on what has been replaced, JBV-1 needs
power supply from different sources.
- This is required, because depending on the case JBV-1 needs to set
phone in different operating modes
- Supply power to JBV-1 Docking station from FPS-10 or FPS-21 Flash
Prommer output or external power supply depending on what components
were replaced, see table above.
- Connect phone and scan product, read phone information to check
communication with phone
- Open “Tools” – “IMEI / ESN Rebuild DCT-4” - Menu
- Provide Tucson Password and PIN code which have been delivered to you
by email. Please note that characters are case sensitive
- Select “UEM Replaced” if needed, see table above.
- Please note that SW update must be done separately, it can not be
combined with this procedure

Known errors & limitations:

- Software downgrade with Tucson system is only possible for BB 5.0
products supporting the Data Package 2 concept.
- Flashing with Flashing with FLS-5, SS-46 and product specific adapter is
not supported anymore
- If you install old DCT-4 data packages, Flash Update Package File
installation path may be wrong. This is caused by very old DCT-4 data
packages which contain Flash Update Package and overwrite current
information during installation. If you ********** problems when up******
FPS-x prommers, please check that Phoenix “Prommer maintenance” is
looking for the files from the correct location which is “C:\Program
Files\Common Files\Nokia\Tss\Flash”. If not, Phoenix will show error
“Update via ini – file failed”. In this case, select “Update” from that Phoenix
“Prommer maintenance” – UI, browse to correct directory and select
“fpsxupd.ini” for all other prommers except the FPS-8.
- Multi Flash has limited capabilities, launch Multiflash UI first and then
connect phones one by one, do not attempt to service more than 5
phones at the time

Загрузить

rapidshare линк