Re: Пожелания и рекомендации команде Infinity Box
#451
Добрый день, уважаемый Ihelper.
Просьба потестировать InfinityUpdate_ChineseMiracle_v2.86.
Обнаружелась проблемма с записью, вула назад в телефон(на блюдалась на 2-х телефонах с пр-м 6225), также уважаемый Oleg67
http://www.mcrf.ru/forum/showpost.php?p=174346&postcount=8 описал подобную ситуацию.
логи на разных версиях
Код:
==== log: [31.07.2009 9:30:16] ====
COM10 [VCP2] selected
module v2.86
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: write NOR flash
"smart write" active
write: Firmware
editor_corrected_X200_HT_PCB01_GPRS_MT6225_S00.LX20025_0_1_2_7T06M0302_M411A__fullflash_20090731-091741.B0M.bin
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A05:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:A403:0004
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
detecting chip #01 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
detecting chip #02 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
detecting chip #03 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud ...
460800
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
====================
New firmware detected (v.2.86, database date: 26.07.2009):
X200_HT_PCB01_GPRS_MT6225_S00.LX20025_0_1_2_7T06M0302_M411A.BIN
This firmware is missing in support area. If this phone is good and working:
- make "Read full flash" operation
- send flash backup files to support: [email protected]
- include in your e-mail full text from phone back label (phone name etc.)
====================
identification#1 detection finished
identification#1 protocol ver: 04
ver. sw 1: X200_HT_PCB01_GPRS_MT6225_S00.LX20025_0_1_2_7T06M0302_M411A.BIN
ver. sw 2: LX20025.0.1.2.7T06M0302_M411A, 00000000
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
security area (code #1) check...
security area (code #1) fixed
detecting security area (code #2)...
security area (code #2) is absent
Area: Firmware
flash: 2088C4FFFFFFFF:2088C400000000
Write: Firmware
error: no any expected answer
error: flash write error: 00A60000:00002000
error: no any expected answer
error: flash write error: 00A60000:00002000
0000000100020000000000000000000000000000000000
detect device identification#2...
detection phase #1...
==== log opened: [31.07.2009 9:36:12] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.exe
Loading data, wait...
[Infinity Box] Chinese Miracle v2.81
S/N: 1083:0112
Wait...
Device: Autodetect 6205-6227 NOR
Done
COM10 ready
Loading file v.03...
editor_corrected_X200_HT_PCB01_GPRS_MT6225_S00.LX20025_0_1_2_7T06M0302_M411A__fullflash_20090731-091741.B0M.bin loaded
identification#1 protocol ver: 04
ver. sw 1: X200_HT_PCB01_GPRS_MT6225_S00.LX20025_0_1_2_7T06M0302_M411A.BIN
ver. sw 2: LX20025.0.1.2.7T06M0302_M411A, 00000000
detecting languages...
Languages: En Ru Fr De Id Th Vn Tr
==== log: [31.07.2009 9:37:04] ====
COM10 [VCP2] selected
module v2.81
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: write NOR flash
"smart write" active
write: Firmware
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A05:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:A403:0004
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
detecting chip #01 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
detecting chip #02 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
detecting chip #03 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud ...
460800
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
====================
New firmware detected (v.2.81, database date: 13.04.2009):
X200_HT_PCB01_GPRS_MT6225_S00.LX20025_0_1_2_7T06M0302_M411A.BIN
This firmware is missing in support area. If this phone is good and working:
- make "Read full flash" operation
- send flash backup files to support: [email protected]
- include in your e-mail full text from phone back label (phone name etc.)
====================
identification#1 detection finished
identification#1 protocol ver: 04
ver. sw 1: X200_HT_PCB01_GPRS_MT6225_S00.LX20025_0_1_2_7T06M0302_M411A.BIN
ver. sw 2: LX20025.0.1.2.7T06M0302_M411A, 00000000
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
detecting security area (code #2)...
security area (code #2) is absent
Area: Firmware
flash: 2088C4FFFFFFFF:2088C400000000
Write: Firmware
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
Write Done
Finalization ...
Finalization Done
Finished, time used: 60 sec
Remove/Install battery now !
Код:
==== log: [30.07.2009 16:57:32] ====
COM9 [VCP1] selected
module v2.86
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: write NOR flash
"smart write" active
write: Firmware
editor_corrected_LC6225_GEMINI_PCB01_GPRS_MT6225_S00.LBA3Z01_8_5_1_5T06M0428_M510C__fullflash_20090730-164253.B0M.bin
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A05:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:B303:000B
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
detecting chip #01 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
detecting chip #02 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
detecting chip #03 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud ...
921600
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
identification#1 detection finished
identification#1 protocol ver: 04
ver. sw 1: LC6225_GEMINI_PCB01_GPRS_MT6225_S00.LBA3Z01_8_5_1_5T06M0428_M510C.BIN
ver. sw 2: LBA3Z01.8.5.1.5T06M0428_M510C, 00000000
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
security area (code #1) check...
security area (code #1) fixed
detecting security area (code #2)...
security area (code #2) is absent
Area: Firmware
flash: 2088C4FFFFFFFF:2088C400000000
Write: Firmware
error: no any expected answer
error: flash write error: 00640000:00002000
error: no any expected answer
error: flash write error: 00640000:00002000
detect device identification#2...
detection phase #1...
error: wrong answer: 33
.
detect device identification#2 finished
Write Fail
Finished, time used: 98 sec
Remove/Install battery now !
COM10 ready
COM10 [VCP2] selected
module v2.81
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: write NOR flash
"smart write" active
write: Firmware
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A05:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:B303:000B
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
detecting chip #01 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
detecting chip #02 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
detecting chip #03 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud ...
460800
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
detect device identification#1...
detection phase #1...
.
detection phase #2...
................................................................................................................................................................................................................................................................
warning: identification#1 information not found, possible reasons:
.old firmware type w/o identification#1 data
.damaged firmware
.damaged hardware
if phone works fine just ignore this warning
detect device identification#1 finished
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
detect device identification#1...
detection phase #1...
.
detection phase #2...
................................................................................................................................................................................................................................................................
warning: identification#1 information not found, possible reasons:
.old firmware type w/o identification#1 data
.damaged firmware
.damaged hardware
if phone works fine just ignore this warning
detect device identification#1 finished
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
detecting security area (code #2)...
security area (code #2) is absent
Area: Firmware
flash: 2088C4FFFFFFFF:2088C400000000
Write: Firmware
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
Write Done
Finalization ...
Finalization Done
Finished, time used: 201 sec
Remove/Install battery now !