Тема: Infinity не бутит кита 8800SAFFER, пинаут верный. Помогите побороть!
Показать сообщение отдельно
  • Новое
    Аватар для Planet

    Planet
    Новичок

    Сообщений:
    75
    Регистрация:
    20.03.2007
    Возраст:
    52
    Рейтинг мнений:
    Вес репутации: 0
    Planet Planet Planet Planet
    Очки: 4,408, Уровень: 42 Очки: 4,408, Уровень: 42 Очки: 4,408, Уровень: 42
    Активность: 0% Активность: 0% Активность: 0%
    По умолчанию Re: Infinity не бутит кита 8800SAFFER, пинаут верный. Помогите побороть! #13
    1. Пробовал бокс на компе помощнее, Core Duo и 2048 Mb RAM, без изменений, те же глюки.

    2. Пробовал Crui-ser 5-in-1 cable (fighter cable) на FTDI тоже, вообще ничего не заработало. Может от того что там эти все сигналы еще через 74серии микросхему идут. Жаль..

    3. Нашелся дома кабель, COM, для прошивки Siemens C62, разбирать не стал, скорей всего там MAX232, вот с ним всё считалось. На жуткой скорости правда, - лог вот:

    Код:
    COM1 [Serial0] selected
    module  v2.84
    Device: Autodetect 6205-6227 NOR
    Checking data, wait...
    advanced flash detection enabled
    Action: read/check detailed information
    Boot ...
    Press and HOLD Power button now !
    19200 fixed
    Connecting, wait...
    Initializing [6225:8A05:8A00]...
    CPU: MT6225
    high speed boot Off
    chip: 0001:3103:000F
    status: FF
    high speed boot Off
    boot packet size: 0400
    Release Power button now !
    Boot Done
    Initialize ...
    detecting chip #00 in region #00...
    flash: 208818FFFFFFFF:20881800000000
    flash: ST ST [def 0080x040000] 32Mb
    detecting chip #01 in region #00...
    flash: 208818FFFFFFFF:20881800000000
    flash: ST ST [def 0080x040000] 32Mb
    number of flash chip/regions detected: 02/01
    Initialize Done
    Set baud ...
    115200
    Set baud Done
    Initialize bootcode ...
    Initialize bootcode Done
    Check firmware integrity ...
    device parameters autodetection in progress...
    detecting chip #00 in region #00...
    flash: 208818FFFFFFFF:20881800000000
    flash: ST ST [def 0080x040000] 32Mb
    detecting chip #01 in region #00...
    flash: 208818FFFFFFFF:20881800000000
    flash: ST ST [def 0080x040000] 32Mb
    it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
    number of flash chip/regions detected: 01/01
    total flash region size: 02000000
    detect device identification#1...
    detection phase #1...
    detect device identification#1 finished
    identification#1 structure: 2nd [standard] generation
    identification#1 detection finished
    identification#1 protocol ver: 04
    ver. sw 1: L01_GEMINI_07B_PCB01_GPRS_MT6225_S00.MAUI_07B_W08_16_MP_V4_F1.BIN
    ver. sw 2: MAUI.07B.W08.16.MP.V4.F1, 00000000
    ffs offset/size: 01C00000/00400000
    detect device identification#2...
    detection phase #1...
    .
    detect device identification#2 finished
    detecting ffs/eeprom area in 1 chip(s)...
    standard ffs/eeprom offset detected: 01C00000
    flash: 208818FFFFFFFF:20881800000000
    checking area [00000000]: 00000000-01FFFFFF...
    ffs/eeprom found near: 01C00000
    detecting ffs/eeprom size...
    ffs/eeprom size: 00400000
    ffs/eeprom chip: 00
    ffs/eeprom area: 00000000:01C00000-01FFFFFF
    detecting ffs/eeprom structure pass 1...
    ...........................
    detect standard fat location pass #1...
    ...............................................................................
    detect standard fat offset pass #1...
    detect standard fat data...
    detected record size adjusted
    fat layout detection complete
    ffs/eeprom detected ok: element #1
    detecting ffs/eeprom structure pass 2...
    ...........................
    detect standard fat location pass #1...
    ...............................................................................
    detect standard fat offset pass #1...
    detect standard fat data...
    fat layout detection complete
    ffs/eeprom detected ok element #2
    Check firmware integrity Done
    Check firmware content ...
    detecting firmware build...
    ...............................................................................
    firmware build: 200905131610
    detecting product-id...
    ................................................................................................................................
    done
    detecting languages...
    ...............................................................
    language parameters detected
    detected languages: En Ru Gr Fr Es It De Id Th Vn Cn Tr Farsi Pt Cn Ar
    Check firmware content Done
    Backup required data ...
    Finished, time used: 146 sec
    Remove/Install battery now !
    Во всём виноват Infinity Slim, так понимаю...
    Буду искать кабель на PL2303, пробовать с ним.
    28.06.2009, 04:23
    Меню пользователя Planet
    Посмотреть профиль
    Отправить личное сообщение для Planet
    Посетить домашнюю страницу Planet!
    Найти ещё сообщения от Planet