VPP is DISABLED.
                    Using Tx2 Data line.
BB5 PM back Phone is in: Phone is not responding!
Processing File:  rm411__04.86.mcusw
Boot...
rap3gv3_2nd.fg
RAP3Gv3_algo.fg
CMT Certificates
Erase RAP3 [00000000 - 000006BF]
Erase RAP3 [000006C0 - 0001FFFF]
Erase RAP3 [00040000 - 000BFFFF]
Erase RAP3 [000C0000 - 0013FFFF]
Erase RAP3 [00140000 - 0137FFFF]
Erase RAP3 [01380000 - 0151FFFF]
Erase[21.00 MB]...
Waiting response for  320 Sec...in 5.05s
Flash[19.80 MB]...
	Data Error!!
Check TX2 line!

%%%%%%%% ERROR SENDING FLASH: 
Failed at address 00000000

 = Set Flash mode for info ============= 
VBat is 3.90V

Vpp pin has 0.09V, Not Connected
Pins:
     Mbus 1, Box Tx 1, Box Rx 1, Bsi 0
Boot...
                    Using Tx2 Data line.
rap3gv3_2nd.fg
RAP3Gv3_algo.fg
BOOT OK...
Phone Type: BB5
------------------- SYSTEM ID Response: 7 blocks -------------
SYSTEM_ASIC_ID( RAP ):
	000000010000022600010006030C192101033000
EM_ASIC_ID( RAP ):
	00000295
EM_ASIC_ID( RAP ):
	00000B22
PUBLIC_ID( RAP ):
	26D00106F91603549E58AF86521EF45F5003B701
ASIC_MODE_ID( RAP ):
	00
ROOT_KEY_HASH( RAP ):
	9DDBFCFE6E73CED7D8C6268C8EB85723
ROM_ID( RAP ):
	273F6D55DFAAF68F
---------------    Device ID Response: 3 blocks    -------------
Storage Device:
 Owner Asic: RAP
 Type: NOR Flash
 Index: 0
 Flash: 	Intel, 0089 8982 0000 0000
Storage Device Contents:
 Owner Asic: RAP
	0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
============= Set FBus mode for info =============
VBat is 3.90V

Vpp pin has 0.09V, Not Connected
Pins:
     Mbus 1, Box Tx 1, Box Rx 0, Bsi 0