K300 не заряжается
#1
Вообщем пришел ко мне с перемычками вместо стекляшки на зарядку-интерфейс.
Поставил сразу стекляшку. При выключеном телефоне и подключении БП в качестве зарядки - пытается запуститься, потребляет 280мА пару секунд, появляется заставка SE (почему-то с повышенным контрастом), перестает потреблять, выключается. При включеном состоянии - показывает зарядку, потребление также: появлется, потом пропадает. Заменены все по 2 раза(т.к. ставил с разборки): стекляшка, контроллер питания, транзитор-ключевик заядки, резистор 0,1 ома, 2 резитора по 0.50 ома (около батареи), процессор, тело прошито фуллом с GDFS, все так и осталось. Батареи разные пробовал. Само тело работает без проблем.
Есть идеи? Или в утиль?
p.s.
додумался посмотреть лог при старте, нашел это:
Код:
552 BATT: Battery type is UNKNOWN
557 BATT: Measurements are 2798 mV and 0.0 mA
557 BATT: Charge current (0.0 mA) based remaining capacity is 100.0%
средний контакт батареи идет на контроллер питания. а откуда процессор узнает о типе батареи? смотрел схему, пока ничего не нашел.
кому интересно, вот полный лог:
Код:
OS: core startup of System
OS: MM init and instruction cache setup
OS: Installing static device drivers
OS: Starting RTC
OS: current time Thu Jan 1 00:01:07 1970
OS: Starting HEAP
OS: Memscan found Flash @ 0x44000000 Size=0x2000000
OS: Memscan found RAM @ 0x4c000000 Size=0x800000
OS: Memscan found unknown area @ 0x50000000 Size=0x2000000
OS: Starting FAM
OS: Flash area base:0x44000000 size:0x2000000 driver:cfi params:
OS: Executable flash area base:0x44000000 size:0xf00000
OS: Executable flash area base:0x45000000 size:0x200000
OS: MMU and data cache setup
FS: *** This is SEMC FS ***
FS: Server processes started.
FSFLASH: CPU is ARM 926, revision 3, architecture 6
FSFLASH: Inst Cache size is 16.00 Kb, 4-way, 32 bytes/line.
FSFLASH: Data Cache size is 8.00 Kb, 4-way, 32 bytes/line.
FSFLASH: NOR Flash device @ [0x44000000-0x45FFFFFF] 32768 Kb
FSFLASH: Vendor (0x20): ST
FSFLASH: Device ID: 0x880D
FSFLASH: Write Buffer Size: 64 bytes
FSFLASH: Erase region [0x44000000-0x45FDFFFF] has an erase block size of 128 Kb
FSFLASH: Erase region [0x45FE0000-0x45FFFFFF] has an erase block size of 32 Kb
FSFLASH: Write processes started, pid = 0x10025.
FSFLASH: Erase processes started, pid = 0x10026.
FSFLASH: Logical flash block size is 256 Kb
FSFLASH: File system flash segment 0 located in NOR @ [0x44D00000,0x44EFFFFF] (2048 Kb)
FSFLASH: File system flash segment 1 located in NOR @ [0x45000000,0x45FFFFFF] (16384 Kb)
FSFLASH: Pack Process started, pid = 0x10027.
MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 1024 bytes requested in total ****
FSFLASH: 72 flash block(s) available (out of 72)
FSFLASH: Number of AVAILABLE file system blocks: 18104
FSFLASH: Number of USED file system blocks: 4198
FSFLASH: Number of DIRTY file system blocks: 138
FSFLASH: Number of CLEAN file system blocks: 14024
FSFLASH: Number of BAD file system blocks: 0
FS: Mounting file system partition /
FS: Mounting file system partition /tpa/system/bg_images/cache
FS: Mounting file system partition /ifs
FS: Mounting file system partition /system
FS: Mounting file system partition /smsdata
MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 2048 bytes requested in total ****
BuildInfo: Label: <BAS_CORA_CRH109497_R5N_050524_0831> Variant: <cxc1328697_G200_PHONE_KRISTINA>
BuildInfo: Generated: 2005-05-24 09:08 by EMLDEHS
Product : <K300 series> Version: 0001
HW Setup : Marita Compact (Id:0x8000) IRDA: B004 BT: C002 RS232: A004
Vendor : <Sony Ericsson> PNP: SER USB: 0FCE BT: 0000
Prototype start process started!
MPH NullState
RLC: RLC_LLC
RLC: RLC_IDLE_REQ = 7385
RLC: RLC_GMM_DATA_REQ = 7386
RLC: RLC_DATA_REQ = 7387
RLC: RLC_UNITDATA_REQ = 7388
RLC: RLC_RLC_DATA_REQ = 7389
RLC: RLC_RLC_UNITDATA_REQ = 7390
RLC: RLC_DATA_RSP = 7391
RLC: LLC_RLC
RLC: RLC_DATA_CNF = 7395
RLC: RLC_DATA_IND = 7396
RLC: RLC_STATUS_IND = 7397
RLC: RR_RLC
RLC: RR_TBF_ESTABLISH_REQ = 6910
RLC: RR_UPLINK_TBF_RELEASE_REQ = 6912
RLC: RR_DOWNLINK_TBF_RELEASE_REQ = 6913
RLC: RR_TBF_RELEASE_RSP = 6914
RLC: RR_DOWNLINK_ACK_NACK_REQ = 6915
RLC: RLC_RR
RLC: RR_TBF_ESTABLISH_CNF = 6920
RLC: RR_UPLINK_TBF_RELEASE_CNF = 6922
RLC: RR_DOWNLINK_TBF_RELEASE_CNF = 6923
RLC: RR_TBF_ESTABLISH_IND = 6921
RLC: RR_TBF_RELEASE_IND = 6924
RLC: RR_UPLINK_ACK_NACK_IND = 6925
RLC: PH_RLC
RLC: PH_RLC_DATA_REQ = 7250
RLC: PH_RLC_DATA_RELEASE_REQ = 7252
RLC: PH_RLC_CONTROL_REQ = 7253
RLC: PH_RLC_CONTROL_CONTROL_0_PDCH_REQ = 7255
RLC: PH_RLC_CONTROL_CONTROL_1_PDCH_REQ = 7256
RLC: PH_RLC_CONTROL_CONTROL_2_PDCH_REQ = 7257
RLC: PH_RLC_CONTROL_CONTROL_3_PDCH_REQ = 7258
RLC: PH_RLC_CONTROL_CONTROL_4_PDCH_REQ = 7259
RLC: PH_RLC_CONTROL_CONTROL_5_PDCH_REQ = 7260
RLC: PH_RLC_CONTROL_DATA_0_PDCH_REQ = 7261
RLC: PH_RLC_CONTROL_DATA_1_PDCH_REQ = 7262
RLC: PH_RLC_CONTROL_DATA_2_PDCH_REQ = 7263
RLC: PH_RLC_CONTROL_DATA_3_PDCH_REQ = 7264
RLC: PH_RLC_CONTROL_DATA_4_PDCH_REQ = 7265
RLC: PH_RLC_CONTROL_DATA_5_PDCH_REQ = 7266
RLC: PH_RLC_CONTROL_CONTROL_0_PDTCH_PDCH_REQ = 7267
RLC: PH_RLC_CONTROL_CONTROL_1_PDTCH_PDCH_REQ = 7268
RLC: PH_RLC_CONTROL_CONTROL_2_PDTCH_PDCH_REQ = 7269
RLC: PH_RLC_CONTROL_CONTROL_3_PDTCH_PDCH_REQ = 7270
RLC: PH_RLC_CONTROL_CONTROL_4_PDTCH_PDCH_REQ = 7271
RLC: PH_RLC_CONTROL_CONTROL_5_PDTCH_PDCH_REQ = 7272
RLC: PH_RLC_CONTROL_DATA_0_PDTCH_PDCH_REQ = 7273
RLC: PH_RLC_CONTROL_DATA_1_PDTCH_PDCH_REQ = 7274
RLC: PH_RLC_CONTROL_DATA_2_PDTCH_PDCH_REQ = 7275
RLC: PH_RLC_CONTROL_DATA_3_PDTCH_PDCH_REQ = 7276
RLC: PH_RLC_CONTROL_DATA_4_PDTCH_PDCH_REQ = 7277
RLC: PH_RLC_CONTROL_DATA_5_PDTCH_PDCH_REQ = 7278
RLC: PH_RLC_RELEASE_REQ = 7279
RLC: RLC_PH
RLC: PH_RLC_DATA_CNF = 7290
RLC: PH_RLC_DATA_IND = 7291
RLC: PH_RLC_DATA_RTS_IND = 7292
RLC: PH_RLC_DATA_RELEASE_CNF = 7293
RLC: PH_RLC_CONNECT_IND = 7294
RLC: PH_RLC_CONTROL_CNF = 7295
RLC: PH_RLC_CONTROL_IND = 7296
RLC: PH_RLC_RELEASE_CNF = 7297
RLC: RLC_TIMER
RLC: RLC_TIMER_T3164 = 7465
RLC: RLC_TIMER_T3166 = 7466
RLC: RLC_TIMER_T3180 = 7467
RLC: RLC_TIMER_T3182 = 7468
RLC: RLC_TIMER_T3190 = 7469
RLC: RLC_TIMER_T3192 = 7472
RLC_UL: S I
RR: PID 65596
RR: TIMER_PRIM 7582
RR: MPH_RR_PRIM 6720
RR: RR_MPH_PRIM 6770
RR: RR_RLC_PRIM 6910
RR: RLC_RR_PRIM 6920
RR: PH_MPH_PRIM 7010
RR: MPH_PH_PRIM 7080
RR: PH_RLC_PRIM 7250
RR: RLC_PH_PRIM 7290
LLC: PID 65600
LLC: <SMS 3822
LLC: >SMS 3833
LLC: <SNDCP 7340 7348
LLC 1: state 0
LLC 3: state 0
LLC 5: state 0
LLC 7: state 0
LLC 9: state 0
LLC 11: state 0
RLC_DL: S ILLDebug_Init: LLDEBUG cable detected
ACB/Debug driver: LLDEBUG cable detected
ACB/Debug driver: Error PD_GPIO_InterruptUnsubscribe failed
### Print Server: Requesting DebugMux channel...
141 ### Print Server: Started OK
142 Prototype Start Process [File System Version Control]: Type OK (Kristina)
[142 Prototype Start Process [File System Version Control]: Version OK (P5T)
144 RLink: RLINK_PH
R
144 RLink: PH_RLINK_CONNECT_IND = 6672
144 RLink: PH_RLINK_DISCONNECT_IND = 6673
144 RLink: PH_RLINK_RTS_IND = 6670
144 RLink: PH_RLINK_DATA_IND = 6671
144
RLC: PH_RLINK
144 RLink: PH_RLINK_DATA_REQ = 6660
144
RLink: RLINK_RLP
144 RLink: RLINK_RLP_RTS_IND = 4990
144 RLink: RLINK_RLP_DATA_IND = 4994
144
RLC: RLP_RLINK
144 RLink: RLINK_RLP_DATA_REQ = 4995
144 RLink: RLINK_RLP_DTX_REQ = 4996
144
RLC: RLINK_RR
144 RLC: RR_CHANNEL_MODE_INFO_IND = 42861
145 RLC: RR_CHANNEL_MODE_MODIFY_IND = 42862
145 RLink: State Idlesysctrl] Initializing Interactive Debug support.
147 RH: Activate on LRRAT = 0
147 RH state: Inactiveational Rose RealTime C Target Run Time System
147 Release 6.50.C.00 (-Cl,G0,-L,+Me,-O)
147 Copyright (c) 1993-2003 Rational Software
148 SM: Initiated; ProcessID = 65652 !MM: reset TMSI
149 MM: No valid GSM keys
149 MM: No valid WCDMA keys
149 MM: TVP Probe P_UAS_CAS_MM_Status Error
149 MM: state 0
149 MM: TVP Probe P_UAS_CAS_MM_Status ErrorGMM: ResetSIM_Data
150 GMM: No valid GSM-GPRS keys
150 GMM: No valid WCDMA keys
150 LLC 1: Unexpected signal #7417* CC1 state 0
151 * CC2 state 0
151 * CC3 state 0
151 * CC4 state 0
151 * CC5 state 0
151 * CC6 state 0
151 * CC7 state 0
151 DRM: DRM_Process started
156 Assert Failure in .\cxc1328697_G200_PHONE_KRISTINA\IAR-ARM7\inc\dispdrv_phys_pdi.c(980)
158 MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 2296 bytes requested in total ****
160 SS: State Idle @
160 CallMeter started
160 SMC_MO_1 (65627) state 4
160 SMC_MO_2 (65628) state 4
160 SMC_MT (65629) state 4
160 SMR_MO state 3
160 SMR_MT state 3
160 GDFS_SRV State 1-ClosedAM: MODULE_INIT
163 [sysctrl] Enabling UICC refresh task.
163 R2BA010 prgCXC125978_EU_1_KR
163 [SIM] State Changed: SIM_STATE_NULL, Appl: 0, Ref: 0
171 GDFS: Format version 1
173 GDFS Log[0] <- Phys[0] 56098 bytes left. Erased 0 times
175 GDFS Log[1] <- Phys[1] 62790 bytes left. Erased 0 times
178 GDFS Log[2] <- Phys[2] 18537 bytes left. Erased 0 times
180 GDFS Log[3] <- Phys[3] 105538 bytes left. Erased 0 times
180 GDFS Log[4] <- Phys[4] 106367 bytes left. Erased 0 times
181 GDFS Log[5] <- Phys[5] 107273 bytes left. Erased 0 times
181 GDFS Log[6] <- Phys[6] 131060 bytes left. Erased 0 times
183 GDFS_SRV State 2-Opening
184 CC: speech ver config 2 0 1 15 15
184 CC: TTY mode = 0
184 * CC0 state 0
185 MPH: PacketChannels activated
185 RR Multislot class GPRS = 8
185 RR state 0
185 MS_TYPE = MS_EGSM900_DCS1800_PCS1900
185 MPH:SelectedModeIndex=1
186 MPH_GD_Info.SensitivityLimit_dBm[BAND_GSM900_OR_EGSM900] = -107
186 ETX OK
186 MPH_GD_Info.SensitivityLimit_dBm[BAND_DCS1800] = -107
187 MPH_GD_Info.SensitivityLimit_dBm[BAND_PCS1900] = -107
187 MPH_GD_Info.SensitivityLimit_dBm[BAND_GSM850] = -107
187 MPH_GD_Info.MinNrOfIdentifiedCellsToSkipWeakCells = 0
189 MMM IMEI = 359986-00-822369-0, IMEI_SVN = 22
189 MMM EqPLMN List read from GDFS, nbr=1, 257 2
189 MMM: TVP Probe P_UAS_CAS_PLMN_List Error
189 MMM state 0
189 MMM MM_SIM_DATA_SET_REQ
192 DebugMux[IMEI] Length=8, TypeOfID=2, OddEven=1, Digits: 3 5 9 9 8 6 0 0 8
195 [lockctrl] SimLock : NOT OK, PhoneLock : NOT OK, Sim Active : NOT ACTIVE
197 IrDA_lap_rec.c: IrLAP process ready !
197 IrDA_lmp_rec.c: IrLMP process ready !
197 MMM MS_OperationMode=0
197 CCS: Idle
197 SL: SIGID_INTERVAL_START_MOD_NS_CAS = 3660
197 SL: ProcessID = 10055
198 SL: CFG_DISABLE_SECURITY_HANDLING is NOT! defined
198 SL: DUAL_RAT_SUPPORT is NOT! defined
198 SL state 0
198 SL<-EVENT_SIM_STATE_CHANGED in State 0 from 100ac
198 SL: Not active
198 SL new SIM handle=0RLP: process started
198 L2RCOP: process started
198 RLP: state changed to 'S0_ADMandDetached'
198 L2RCOP: state changed to 'Initial'
198 Load Module Starter: Hunt for Program Manager failedACM: Starting Application Side.
201 [sysctrl] start-up cause : Charger Connected
201 [sysctrl] System mode changed from SHUTDOWN/INITIATING to CHARGING/ALARM
201 [sysctrl] System Start-Up is complete
201 [lockctrl] SimLock : NOT OK, PhoneLock : NOT OK, Sim Active : NOT ACTIVE
201 [lockctrl] SimLock : OK, PhoneLock : NOT OK, Sim Active : NOT ACTIVE
201 [lockctrl] SimLock : OK, PhoneLock : OK, Sim Active : NOT ACTIVE
201 [sysctrl] Normal Voltage ind. received from SysPwr
202 [SIM_FILE_UTIL] FCP Cache Size 80AT process: Awake and AT your service!
212 ###Downloading DSP for first time after startup of phone!###
214 DSPIF_INT Exception: MPORTIF Soft reset
214 DSPIF_INT Exception: MPORTIF Soft reset
214 [ICC] Reader Voltage:OFF
214 [SIM-RDR] Fi: 1 Di: 1 Div1: 0 Div2: 0
215 [ICC] Reader Voltage:1V8
218 GVI:ReadyACM.StartMain: Starting First App. id=1...
223 DSPIF_INT Exception: MPORTIF Soft reset
223 DSPIF_INT Exception: MPORTIF Soft reset
223 ACM.StartMain: Start of First App ok.
223 AM: MODULE_INIT_READY
223
223
223 ******************************************
223 * Sony Ericsson Mobile Communications AB *
223 * Copyright 2003 *
223 ******************************************
223 * R2BA010 prgCXC125978_EU_1_KR *
223 ******************************************
224
224
224 AAM: Start initializing persistent data.
224 (OBEX/obex_session.c line: 2224) OBEX Started.
225 RTP_Ctrl started
225 MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 2552 bytes requested in total ****
227 ## DSP VersionIdentity: "Marita Compact DSP midi_pcm_asr CNH1600219_R2L002______ 18Feb2005_13:44:18"
227 MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 3576 bytes requested in total ****
228 MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 4600 bytes requested in total ****
238 [ICC] Reader Voltage:OFF
240 MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 5642 bytes requested in total ****
250 [SIM-RDR] Fi: 1 Di: 1 Div1: 0 Div2: 0
250 [ICC] Reader Voltage:3V
272 [ICC] Reader Voltage:OFF
272 [SIM] WARNING - Destruction of Application Parameters
272 [SIM_FILE_UTIL] Used Cache Records 0
272 [SIM_FILE_UTIL] Max Cache Records 80
272 [SIM] WARNING - Destruction of Card Parameters
272 [SIM] State Changed: SIM_STATE_POWER_OFF, Appl: 0, Ref: 0
272 [lockctrl] SimLock : OK, PhoneLock : OK, Sim Active : NOT ACTIVE
272 SL<-EVENT_SIM_STATE_CHANGED in State 0 from 100ac
273 SL: Not active
273 SL new SIM handle=0
275 MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 6106 bytes requested in total ****
276 MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 6882 bytes requested in total ****
282 MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 7906 bytes requested in total ****AAM: Done initializing persistent data.
339 MMPROT[RTSP]: RTSP Process Started
340 MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 8930 bytes requested in total ****
355
357 MSG: msgmain.c: State 255OS: Starting ose_memory_mgr
358 OS: core startup complete!
358 GDFS_WR State 1-Closed
358 GDFS_WR Start check
361 MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 9552 bytes requested in total ****GDFS_Wrapper: **** Up and running ****
362
362 MAPP: OSC charging
377 Watchdog: process up and running.
377 Watchdog: Crash SMS not activated
379 ***** Investigating Language Availability *****
380 MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 10203 bytes requested in total ****
382 MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 10853 bytes requested in total ****
385 MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 11419 bytes requested in total ****
387 AUC_INFO: AC_SetAcousticProperties, /ifs/settings/acoustic/farfield_play.apf
390 EST: FS = Available, ROM = Unavailable
390 ENG: FS = Unavailable, ROM = Available
390 LAT: FS = Available, ROM = Unavailable
391 LIT: FS = Available, ROM = Unavailable
391 POL: FS = Available, ROM = Unavailable
391 RUS: FS = Available, ROM = Unavailable
391 UKR: FS = Available, ROM = Unavailable
391 ***********************************************
393 MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 22855 bytes requested in total ****
393 Disp_CreateFont: Creating font 0
393 Disp_CreateFont: Creating font 1
394 Disp_CreateFont: Creating font 2
394 Disp_CreateFont: Creating font 10
394 Disp_CreateFont: Creating font 11
394 Disp_CreateFont: Creating font 12
395 Disp_CreateFont: Creating font 13
395 Disp_CreateFont: Creating font 15
396 *** Disp_SetDefaultGlyph: Font 15 failed to set default glyph!
396 SEMC DISPUTIL Line:1953 OPA_ErrorCode: Unknown ErrorCode
396 Disp_CreateFont: Creating font 16
396 Disp_CreateFont: Creating font 17
397 Disp_CreateFont: Creating font 18
397 Disp_CreateFont: Creating font 20
397 Disp_CreateFont: Creating font 31
397 Disp_CreateFont: Creating font 32
398 Disp_CreateFont: Creating font 33
398 Disp_CreateFont: Creating font 34
398 Disp_CreateFont: Creating font 47
399 Disp_CreateFont: Creating font 55
399 Disp_CreateFont: Creating font 54
406 ***** Investigating Input Features *****
406 Arabic: NO
406 China: NO
406 Hebrew: NO
406 T9: YES
406 Greek: NO
406 Cyrillic: NO
406 Thai: NO
406 Icelandic: NO
406 Ukrainian: NO
406 Hindi: NO
406 Bengali: NO
406 ****************************************
406 ***** Investigating Input Language Availability *****
406 Predictive state is: ON
406 Predictive default (cust) is: ON
407 ENG: allowed = YES, T9-FS = NO, T9-ROM = YES
407 POL: allowed = YES, T9-FS = YES, T9-ROM = NO
407 RUS: allowed = YES, T9-FS = YES, T9-ROM = NO
408 USE: allowed = YES, T9-FS = NO, T9-ROM = YES
408 UKR: allowed = YES, T9-FS = NO, T9-ROM = NO
408 ABC: allowed = YES, T9-FS = NO, T9-ROM = NO
408 123: allowed = YES, T9-FS = NO, T9-ROM = NO
408 *** (T9) ENG matches USE
408 *** Resolve ok (1), keeping ENG
408 *****************************************************
411 DRM Init OK
412 DRM_PRS_Process started
412 MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 24406 bytes requested in total ****
418 SL<-REQUEST_VOICECALLVOLUME_SET in State 0 from 100ce
419 SL: Not active
473 MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 25642 bytes requested in total ****
474 MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 29288 bytes requested in total ****
474 MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 33248 bytes requested in total ****
474 MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 35161 bytes requested in total ****
475 MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 37273 bytes requested in total ****
475 MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 39385 bytes requested in total ****
476 MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 41376 bytes requested in total ****
527 [StandbyBook:53] Created
530 ImageViewer_Animation: Can not start animation since no valid area to draw in is set!!
532 MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 43450 bytes requested in total ****
533 [StandbyBook:53] Goto StandbyBook_StandbyPage
533 [InitBook:54] Created
533 [InitBook:54] Goto InitBook_StartUp_Page
533 [InitBook:54] Got focus
537 MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 45734 bytes requested in total ****
537 ImageViewer_Animation: Can not start animation since no valid area to draw in is set!!
539 [InitBook:54] Goto InitBook_ChargingOnly_Page
539 [InitBook:54] Lost focus
539 [StandbyBook:53] Got focus
540 [StandbyBook:53] Goto StandbyBook_ChargingOnly_Page
540 MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 48034 bytes requested in total ****
542 MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 50462 bytes requested in total ****
542 MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 56422 bytes requested in total ****
545 SL<-REQUEST_TTY_MODE_SET in State 0 from 100d3
545 SL: Not active
546 ***** Calling IAC_ServerASC_SetVolume *****
546 ***** RingVolume = 5 ****
546 ***** SUCCESS *****
552 BATT: Battery type is UNKNOWN
557 BATT: Measurements are 2798 mV and 0.0 mA
557 BATT: Charge current (0.0 mA) based remaining capacity is 100.0%
569
570 [StandbyBook:53] Goto StandbyBook_ShutDown_Page
577 [OnOffBook:55] Created
577 [StandbyBook:53] Lost focus
577 [OnOffBook:55] Got focus
577 [OnOffBook:55] Goto OnOffBook_ShuttingDownPage
620 AUC: Open Audio: ID: 1. Frequency: 3. Prio: 1 Channels: [0,1,0,1]
620 AUC: Open Audio: Open Channels 1, Freq: 3
624 DSPIF_INT Exception: MPORTIF Soft reset
624 DSPIF_INT Exception: MPORTIF Soft reset
626 DSPIF_INT Exception: MPORTIF Soft reset
626 DSPIF_INT Exception: MPORTIF Soft reset
634 DSPIF_INT Exception: MPORTIF Soft reset
634 DSPIF_INT Exception: MPORTIF Soft reset
638 ## DSP VersionIdentity: "Marita Compact DSP midi_pcm_asr CNH1600219_R2L002______ 18Feb2005_13:44:18"
650 [OnOffAnimationBook:56] Created
650 [OnOffBook:55] Lost focus
651 [OnOffAnimationBook:56] Got focus
663 [OnOffAnimationBook:56] Goto OnOffAnimation_ShowAnimation_Page
663 CreateGuiImageViewer is obsolete! Change to new gui_imageviewer interface instead...
813 AUC: Close Audio: ID: 1. Frequency: 3. Channels: [0,1,0,1]. SendEvent: 0
823 AUC: Close Audio: Open Channels 0, Freq: 0
951
951 WAP:Start (process id 0x10089)
951 WAP: File API Initiated
952 WAP: created task 0
953 WAP: fileMkDir(.../stk)
954 WAP: fileMkDir(.../stk/tmp)
955 WAP: created task 1
958 OAS: 0 Profile Roles active
958 changed to state 0
959 PBS Process started
959
959 PBS: Dispatch PHB_NO_ACCESS
1062 Crypto-capable module loaded as default.
1082 MSG: msgmain.c: State 0 changed to state 1
1082 MSG: msgmain.c: EVENT_SIM_STATE_CHANGED accepted
1082 MSG: msgmain.c: SIM_STATE NOT Active
1082 MSG: msgmain.c: EVENT_SIM_STATE_CHANGED accepted
1082 MSG: msgmain.c: SIM_STATE NOT Active
1226 Handle_Shell_Timeout: Time-out from non-existent timer: 4c71b25c - Ignored.
1228 Handle_Shell_Timeout: Time-out from non-existent timer: 4c71b25c - Ignored.
1310 BATT: Measurements are 3796 mV and -51.0 mA
1310 BATT: Compensated VBAT (3671 mV) based remaining capacity is 11.6%
1310 BATT: Average remaining capacity is 11.6%
1481 GDFS Free Blk 7 Ok
1481 GDFS_WR Check done
1481 GDFS_SRV State 3-Open
1502 GDFS_WR State 2-Open
1560 BATT: Measurements are 3806 mV and -51.0 mA
1560 BATT: Compensated VBAT (3681 mV) based remaining capacity is 13.0%
1560 BATT: Average remaining capacity is 12.3%
1810 BATT: Measurements are 3806 mV and -45.0 mA
1810 BATT: Compensated VBAT (3681 mV) based remaining capacity is 13.0%
1810 BATT: Average remaining capacity is 12.5%
1819 INTERNAL ERROR CDisplayManager_imp.c(311): 0x00000000
1819 SEMC DISPBASE Line:5116 OPA_ErrorCode: Unknown ErrorCodeSEMC_TimerProcess: Received signal to exit.
1829 SEMC_TimerProcess_: Send message to self to terminate.
1829 SEMC_TimerProcess_: All claimed resources now freed. Exiting.
1836 [sysctrl] System shut down
1836 AM:MODULE_SHUTDOWN
1837 AM:MODULE_SHUTDOWN_READY
1837
1838 GVI Heap:ERROR Delete local heap without freeing all memory diff 78 allocations
1838
1838
1838
1838 MSG: msgmain.c: UNEXPECTED PRIMITIVE 44985 RECEIVED
1839 MSG: msgmain.c: SHUTTING DOWN
1839 MSG: msgmain.c: SHUTDOWN COMPLETE
1839 [sysctrl] Deactivating Network Signalling
1839 SL<-R_REQ_NS_DEACTIVATE in State 0 from 1002e
1839 MMM state 17
1839 MM: IsMM_Connected=0
1839 MM: REG FAILED, Cause = DETACHED
1839 GMM<-GMM_DEACTIVATE_REQ
1839 GMM: TVP_GetTimerIndex no TVP timer
1839 GMM: New TLLI distributed to RR: 0xffffffff (255, 255, 255, 255)
1839 TLLI_PTMSI_New
1839 case1 UnassBoth
1840 GMM: Reset combined procedures
1840 GMM: REG FAILED, Cause = DETACHED
1840 MPH Off
1849 MMM state 0