Re: SL600 выкл. на любую кнопку
#3
Шил, также.
Зашивал
Fly-SL600_repair_eeprom_01.B0E.bin
Fly-SL600_SL300_MERID_PCB01_gprs_MT6227_S01[1].SL300_05C_W06_08_MP_V64_E6.02R_Hao_Intel_En_Ru_Uk r.bin
Код:
COM9 [VCP0] selected
Device: Fly-SL600
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: write NOR flash
"smart write" active
"format ffs" active
write: Firmware
skip: Customization/Language Pack
skip: Customization
write: Eeprom/ffs
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6227:8A02:8A01]...
CPU: MT6227
chip: 0031:659E:22F5
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 89881500010001:89881500000000
flash: Intel Intel/Sharp ext [def 0004x008000 007Fx020000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
921600
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
identification#1 protocol ver: 04
ver. sw1: SL300_MERID_PCB01_GPRS_MT6227_S01.SL300_05C_W06_08_MP_V62.BIN
ver. sw2: SL300.05C.W06.08.MP.V62, 00000000
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading: eeprom[SL300_MERID_PCB01_GPRS_MT6227_S01.SL300_05C_W06_08_MP_V62.BIN]...
file saved: C:\Program Files\InfinityBox\MModule\B0E.bin
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
Area: Firmware
flash: 89881500010001:89881500000000
Write: Firmware
Area: Eeprom/ffs
flash: 89881500000000:89881500000000
Write: Eeprom/ffs
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
Write Done
Finalization...
formatting...
flash: 89881500000000:89881500000000
Finalization Done
Finished, time used: 1164 sec
Remove/Install battery now !
File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !
Код:
Пора бы и тэгами панели сообщений научиться пользоваться ,
а то выходит так что они там для красоты панели прицеплены .
В частности тэгом
[CODE] лог
[/code ]