COM5 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: reset
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6205:8B00]...
CPU: MT6205
high speed boot enabled
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 0122C400000000:FFFFFF00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 001Fx010000] 2Mb
detecting chip #01 in region #00...
flash: 0122C400000000:FFFFFF00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 001Fx010000] 2Mb
detecting chip #02 in region #00...
flash: 0122C400000000:FFFFFF00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 001Fx010000] 2Mb
detecting chip #03 in region #00...
flash: 0122C400000000:FFFFFF00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 001Fx010000] 2Mb
detecting chip #04 in region #00...
flash: 0122C400000000:FFFFFF00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 001Fx010000] 2Mb
detecting chip #05 in region #00...
flash: 0122C400000000:FFFFFF00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 001Fx010000] 2Mb
detecting chip #06 in region #00...
flash: 0122C400000000:FFFFFF00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 001Fx010000] 2Mb
detecting chip #07 in region #00...
flash: 0122C400000000:FFFFFF00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 001Fx010000] 2Mb
detecting chip #08 in region #00...
flash: 0122C400000000:FFFFFF00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 001Fx010000] 2Mb
detecting chip #09 in region #00...
flash: 0122C400000000:FFFFFF00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 001Fx010000] 2Mb
detecting chip #0A in region #00...
flash: 0122C400000000:FFFFFF00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 001Fx010000] 2Mb
detecting chip #0B in region #00...
flash: 0122C400000000:FFFFFF00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 001Fx010000] 2Mb
detecting chip #0C in region #00...
flash: 0122C400000000:FFFFFF00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 001Fx010000] 2Mb
detecting chip #0D in region #00...
flash: 0122C400000000:FFFFFF00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 001Fx010000] 2Mb
detecting chip #0E in region #00...
flash: 0122C400000000:FFFFFF00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 001Fx010000] 2Mb
detecting chip #0F in region #00...
flash: 0122C400000000:FFFFFF00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 001Fx010000] 2Mb
number of flash chip/regions detected: 10/01
Initialize Done
Set baud...
921600
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 0122C400000000:FFFFFF00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 001Fx010000] 2Mb
Warning: probably flash chip empty, erased, incorrectly flashed or damaged.

What to do:
1. go to software "Settings" page
2. set "Advanced chip detection method" box UN-CHECKED !
3. make flash write operation

If still no luck: send mail to support with detailed description of problem,
attach the next files in your e-mail:
1. C:\Program Files\InfinityBox\ChineseMiracle\operation.log
2. C:\Program Files\InfinityBox\ChineseMiracle\cfi_xxxx_xxxx.bin
detecting chip #01 in region #00...
flash: 0122C400000000:FFFFFF00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 001Fx010000] 2Mb
it's time to stop: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
number of flash chip/regions detected: 01/01
total flash region size: 00200000
detect device identification#1...
detection phase #1...
.
detection phase #2...
................................................................................................................................
warning: identification#1 information not found, possible reasons:
.old firmware type w/o identification#1 data
.damaged firmware
.damaged hardware
if phone works fine just ignore this warning
detect device identification#1 finished
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset assigned: 00000000
flash: 0122C400000000:FFFFFF00000000
checking area[00000000]: 00000000-001FFFFF...
can't detect eeprom/ffs area, power on/off phone and try again.
error: critical error#1 during ffs size detection
error: can't detect eeprom/ffs address/size
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
flash: 0122C400000000:FFFFFF00000000
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
Write Done
Finalization...
formatting...
flash: 0122C400000000:FFFFFF00000000
Finalization Done
Finished, time used: 43 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !