MTBOX: *********- Nokia Flash/Repair v1_40R1
Box:	CR V 1.002 256
Code:	NK V 1.001 1048
SN:	**********
Nokia Unlimited:	232 times started
SonyEricsson Trial:	10 left, each max 15min
 ============= Set Flash mode for info ============= 
VBat is 3.93V

Vpp pin has 0.09V, Not Connected
Pins:
     Mbus 1, Box Tx 1, Box Rx 0, Bsi 0
Boot...
                    Using Tx2 Data line.
RAPIDOv102_2nd.fg
RAPIDOv11_algo.fg
BOOT OK...
Phone Type: BB5
------------------- SYSTEM ID Response: 7 blocks -------------
SYSTEM_ASIC_ID( RAP ):
	000000010000022600010006400C192101011103
EM_ASIC_ID( RAP ):
	00000295
EM_ASIC_ID( RAP ):
	00000B22
PUBLIC_ID( RAP ):
	105000165D530058014364311D275948CAAE8225
ASIC_MODE_ID( RAP ):
	00
ROOT_KEY_HASH( RAP ):
	9A28E119033B91D14D22838C86D0D53C
ROM_ID( RAP ):
	F2C6EBADC86E6189
---------------    Device ID Response: 3 blocks    -------------
Storage Device:
 Owner Asic: RAP
 Type: NAND Flash
 Index: 0
 Flash: 	Samsung, 00EC 0030 0040 0121
Storage Device Contents:
 Owner Asic: RAP
	030000000000000000000000000000000000
============= Set FBus mode for info =============
VBat is 3.92V

Vpp pin has 0.10V, Not Connected
Pins:
     Mbus 1, Box Tx 1, Box Rx 0, Bsi 0
Scanning files, please wait...
Done
                    Using Tx2 Data line.
Processing File:  rm230_03.27_prd_core_erase.fpsx
Boot...
RAPIDOv102_2nd.fg
RAPIDOv11_algo.fg
NPC 0x180
HWC 0x100
CCC 0x180
		Backup: \GSM_35396401295164_3.r3c
Erase RAP3 [00040000 - 00082FFF]
Erase RAP3 [00083400 - 0087FFFF]
Erase RAP3 [00880000 - 057FFFFF]
Erase[87.75 MB]...
Waiting response for  320 Sec...in 2.45s
Flash[42.30 MB]...in 71.75s 
* * Processed file in 83.02 seconds
Processing File:  rm230_03.27_prd_v05_01_russian.fpsx
Boot...
RAPIDOv102_2nd.fg
RAPIDOv11_algo.fg
Erase RAP3 [03500000 - 052FFFFF]
Erase[30.00 MB]...
Waiting response for  320 Sec...in 1.27s
Flash[28.04 MB]...in 51.84s 
* * Processed file in 62.20 seconds
* * * Phone flashing done in   2:41 minutes
 Post Flash serial tunning of phone....
Pooling mode for full factory set...
	Phone not responding, try to set manually!