lenovo A1000M нужно убрать FRP

[Max VMS]

В общем нет коннекта с телом в boot mode, а в service mode сброс делает, но все равно просит почту. Помогите пож. решить проблему.

Reset in boot mode

Chinese Miracle II [SPD module] v 1.22

Operation : Format File System / Reset Settings [ v1.22 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 53 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
Boot failed!
Loader start failed! Wrong Model selection!
Boot failed!

Reconnect Power/Cable!

Reset in service mode

Operation : Format File System / Reset Settings [ v1.22 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Insert cable
3. In case of SVC init problems - connect with hold "VolDown" button!

==== Wait for phone...

Phone found! [ 54 ]
Port Opened
Sync...
InitSvc Done
Wait for phone...
Sync...
Init Ok , reset settings ...
Format Ok!
Done

Elapsed: 00:00:21

Reconnect Power/Cable!

Check in service mode

Phone found! [ 54 ]
Port Opened
Sync...
InitSvc Done
Wait for phone...
Sync...
Phone Initial Info :
Platform : MOCORTM_14B_TShark_OC_W16.06_Debug
Project : sc7731g_CP0_modem
HWInfo : sc7731g_CP0_modem
Compile : 02-01-2016 20:26:46
Phone Security Info :
IMEI [1] : 8604440*******
IMEI [2] : 860444030*****
BT_ADDR : 000000000000
SelfInfo :
BatVoltage : 3.618 V

Done

Reconnect Power/Cable!

[Uniservice]

Эта модель, как и большинство из новых, соединяется в режиме
SP SC77xx [Model select] с выбором .pac файла прошивки.

[Max VMS]

С файлом прошивки операция прошла успешно

Chinese Miracle II [SPD module] v 1.22

Loading : A1000m_USR_S399_20160701_SPRD7731_ROW.pac
CRVersion : BP_R1.0.0
PacCPUinfo : SC77xx
PacVersion : A1000m_USR_S399_20160701_SPRD7731_ROW
FastCheck : 0x0057AF0A40

Loading files ...

File : fdl1-sign.bin
File : fdl2-sign.bin
File : wnvitem.bin
File : wcnnvitem.bin
File : prodnv.img
File : u-boot-spl-16k-sign.bin
File : wmodem-sign.bin
File : wdsp-sign.bin
File : wcnmodem-sign.bin
File : boot-sign.img
File : recovery-sign.img
File : system.img
File : oem.img
File : persist.img
File : sysinfo.img
File : userdata.img
File : boot_logo.bmp
File : fastboot_logo.bmp
File : cache.img
File : u-boot-sign.bin
File : SC77xx.xml

Load Ok!

Operation : Format File System / Reset Settings [ v1.22 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 53 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ...
Detected eMMC Flash , Structure detect Ok!

eMMC phone detected! Will use 'Safe Format' mode!

Mount : /data
Size : 0x0000000083DF7000
State : 0x0001

Mount : /cache
Size : 0x0000000009600000
State : 0x0001

Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!

Android 5.x : Reset FRP Lock
Reset Ok!


Done!

Elapsed: 00:00:30

Reconnect Power/Cable!

[Jonic77]

A1000m_USR_S399_20160701_SPRD7731_ROW

https://cloud.mail.ru/public/5ABn/QbdkJaREm