CM2 RKT Тест и логи удачных операций

[BOTIR]

Galaxy Tab3 P5200
Info
======= Device Info :
CPU : RK2928
Android : v4.3
Project : 20140312.142246
Name : rk2928sdk
Brand : rk292xsdk
Device : rk2928sdk
Model : Galaxy Tab3 P5200

Read Info Ok!
Elapsed: 00:00:00
Read Flash
Operation : Read Flash [ v1.0 ]

Collect InitData ...
Reading now ...

Reading : PARAMS
Reading : MISC
Reading : KERNEL
Reading : BOOT
Reading : RECOVERY
Reading : BACKUP
Reading : CACHE
Reading : USERDATA
Reading : SYSTEM

Read Ok! Firmware size : 1061 MiB
Saved as : RK2928__GALAXY TAB3 P5200__rk2928sdk__20140312.142246.irkfw
Done!

Elapsed: 00:02:50
Format FS/Reset
Format FS/Reset Settings accepted by User!
Operation : FormatFS / ResetSettings [ v1.0 ]

Init UserData
Init Cache
Init IntSD
Init Ok! Format prepare Done!
Wait, until device reboot

Elapsed: 00:00:0

[Dr_Wolodya]

Успешно форматнул планшет Pipo M9 Pro без кнопок громкости на корпусе:Infinity-Box RockChip Service Tool [RKT] v2.01


Operation : Reset Settings [ v2.01 ]

----- > Phone/Tablet :
1. Power Off device
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable! Press 'POWER_ON' button for a few second!
----- > IoT/Box :
1. Reset device power
2. PRESS and HOLD 'RESET' KEY!
3. Insert OTG/USB cable! Press 'POWER_ON' button for a few second!

Wait for device ...
Device Connected!
Interface test : Passed

Device mode : Protected! [ LOADER PROTECTED ]

Machine : RK3066
Device : M9 PRO
ExtInfo : 4.1.1

SoC CPU : 310B
SoC PDT : 2012
SoC SWN : 1130
SoC REV : V100

Flash CSx : 0x00
Flash Type : 2C64444BA9 [ NAND ]
Flash Vend : MICRON
Flash Size : 0x0000000200000000 ( 8,00 GiB )
Flash Info : 2097152/8192/47/40/15

Connect Ok!

Wiping UserData ...
Wipe DATA Ok!

Done!
Elapsed: 00:00:05

[Gatin]

1 просьба, добавьте как в родном флешере, upgrade or restore
ибо шил планшет он так и остался висящим, родным все ок
Operation : Write Firmware [ v2.01 ]

----- > Phone/Tablet :
1. Power Off device
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable! Press 'POWER_ON' button for a few second!
----- > IoT/Box :
1. Reset device power
2. PRESS and HOLD 'RESET' KEY!
3. Insert OTG/USB cable! Press 'POWER_ON' button for a few second!

Wait for device ...
Device Connected!
Interface test : Passed

Device mode : Normal [ LOADER OPEN ]

Machine : RK3066
Device : PMP7100D3G
ExtInfo : 4.1.1

SoC CPU : 300A
SoC PDT : 2011
SoC SWN : 1111
SoC REV : V101

Flash CSx : 0x00
Flash Type : ADDE94DA74 [ NAND ]
Flash Vend : HYNIX
Flash Size : 0x0000000200000000 ( 8,00 GiB )
Flash Info : 2097152/8192/30/40/5

Connect Ok!

Loading firmware

UnionImage container info :
File [1] : RK30xxLoader(L)_V1.22.bin
File [2] : parameter
File [3] : Image/misc.img
File [4] : Image/boot.img
File [5] : Image/recovery.img
File [6] : Image/system.img
File [7] : parameter
File [8] : SELF
File [9] : update-script
File [10] : recover-script

Skip IDB processing
Initialize PMT ...
Flashing : Image/misc.img
Flashing : Image/boot.img
Flashing : Image/recovery.img
Flashing : parameter
Flashing : Image/system.img


Flashing finished!