Fantomas
06.06.2011, 00:46
Тел. принесли на русификацию.
V101_PCB01_GPRS_MT6235B_S01.X7_110121_V1_6_QC_TR.B IN_FLNHYG0UGG0MF1P_5SH0E
Detailed information:
COM10 [VCP0] selected
module v3.31
Device: Autodetect 6228-6268 NAND
Checking data, wait...
Action: read/check information
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8A04:8A01
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0018]: 00AD:007900A50000 [HYNIX] HY27XA081G1M
chip size: 128Mb
page/spare size: 0200/0010
pages per block: 0020
bits i/o: 08
address cycles: 04
internal RAM size: 00010000
external RAM: absent
done
Set baudrate (921600)...
done
ram test...
testing 32bit...
32bit ram test passed
testing 16bit...
16bit ram test passed
ram test passed
===> detect existing firmware structure...
detect ffs...
ffs offset/size: 03400000/04C00000
firmware size: 52Mb
ffs size: 76Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: X7_110121_V1.6_QC_TR
detect NAND info...
number of areas/bytes to read: 1:00034000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
bootloader version: V101_BOOTLOADER_V005_MT6235B_X7_110121_V1_6_QC_TR. bin
nfi area detection (3 cores) finished: Ok
warning: ffs can not be detected
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
number of areas/bytes to read: 1:00004000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
number of areas/bytes to read: 1:00004000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
startup code area #1 is valid
startup code area #1 detection done
rom info ver: 07
sw version: V101_PCB01_GPRS_MT6235B_S01.X7_110121_V1_6_QC_TR.B IN_FLNHYG0UGG0MF1P_5SH0E
project-id: X7_110121_V1.6_QC_TR, 32644A3C
code offset: 00000000
rom info structure: [protected] type (07), 1 record(s)
TCL-ID is absent
===> done
====================
New firmware found (v.3.31, database date: 29.05.2011):
V101_PCB01_GPRS_MT6235B_S01.X7_110121_V1_6_QC_TR.B IN_FLNHYG0UGG0MF1P_5SH0E
This firmware is missing in support area. If this phone is good and working:
- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to http://rapidshare.com or http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
Disconnect...
done
file saved: C:\InfinityBox\ChineseMiracle\backup_security\V101 _PCB01_GPRS_MT6235B_S01.X7_110121_V1_6_QC_TR.BIN_F LNHYG0UGG0MF1P_5SH0E__system_log_20110602-224625.B4X.bin
Finished, time used: 46 sec
Remove/Install battery now !
Слил ff через CM 3.31, - тел после этого включался. Ещё раз слил ff через FlashTool_v3.1108.00, после чего тел включаться перестал.
Отредактировал ff в lpe, залил в тел - всё равно не включается.
Запись ff после lpe:
COM17 [VCP0] selected
module v3.31
Device: Autodetect 6228-6268 NAND
Checking data, wait...
Action: write flash NAND
write: Firmware
editor_corrected_editor_corrected_V101_PCB01_GPRS_ MT6235B_S01.X7_110121_V1_6_QC_TR.BIN_FLNHYG0UGG0MF 1P_5SH0E__fullflash_20110603-004643.B4M.bin.B4M.bin.B4M.bin
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
nfi area detection...
nfi scat area detected (3 areas)
nfi area detection (3 cores) finished: Ok
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8A04:8A01
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0018]: 00AD:007900A50000 [HYNIX] HY27XA081G1M
chip size: 128Mb
page/spare size: 0200/0010
pages per block: 0020
bits i/o: 08
address cycles: 04
internal RAM size: 00010000
external RAM: absent
done
Set baudrate (921600)...
done
ram test...
testing 32bit...
32bit ram test passed
testing 16bit...
16bit ram test passed
ram test passed
===> detect existing firmware structure...
detect ffs...
detect sec ro...
detect custom parameters...
detect project-id...
detect NAND info...
number of areas/bytes to read: 1:00034000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
warning: incorrect header: 5A5A5A5A5A5A5A5A5A5A5A5A5A5A5A5A
warning: can not detect header
nfi area detection (0 cores) finished: failed
warning: ffs can not be detected
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
code offset: 00000000
===> done
====================
New firmware found (v.3.31, database date: 29.05.2011):
This firmware is missing in support area. If this phone is good and working:
- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to http://rapidshare.com or http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
nfi area detection...
nfi scat area detected (3 areas)
nfi area detection (3 cores) finished: Ok
startup code area #1 check...
rpl file not found: C:\InfinityBox\ChineseMiracle\id.00006235.[V101_PCB01_GPRS_MT6235B_S01.X7_110121_V1_6_QC_TR.B IN_FLNHYG0UGG0MF1P_5SH0E_3C4A6432].rpl
rpl file not found: C:\InfinityBox\ChineseMiracle\id.00006235._V101_PC B01_GPRS_MT6235B_S01.X7_110121_V1_6_QC_TR.BIN_FLNH YG0UGG0MF1P_5SH0E_3C4A6432_.rpl
rpl file not found: C:\InfinityBox\ChineseMiracle\backup_security\id.0 0006235.[V101_PCB01_GPRS_MT6235B_S01.X7_110121_V1_6_QC_TR.B IN_FLNHYG0UGG0MF1P_5SH0E_3C4A6432].rpl
rpl file not found: C:\InfinityBox\ChineseMiracle\backup_security\id.0 0006235._V101_PCB01_GPRS_MT6235B_S01.X7_110121_V1_ 6_QC_TR.BIN_FLNHYG0UGG0MF1P_5SH0E_3C4A6432_.rpl
====================
warning: unknown firmware: V101_PCB01_GPRS_MT6235B_S01.X7_110121_V1_6_QC_TR.B IN_FLNHYG0UGG0MF1P_5SH0E_3C4A6432
Unknown firmware found (v.3.31, database date: 29.05.2011), user action required:
1. download latest software from support area and try again
2. if no still luck follow the next procedure:
- find good working phone with the same firmware:
V101_PCB01_GPRS_MT6235B_S01.X7_110121_V1_6_QC_TR.B IN_FLNHYG0UGG0MF1P_5SH0E
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to http://rapidshare.com or http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)
- be little bit patient and wait update
====================
error: startup code area #1 can't be fixed
You can flash phone now but can not finalize it,
in most cases phone CAN NOT power-on.
Do you want to continue anyway ?
number of cores: 3
loading files...
number of areas: 3
done
write...
write bootloader...
.
.
write core...
Disconnect...
done
Finished, time used: 16 min 15 sec
Remove/Install battery now !
Как можно тел поднять?
V101_PCB01_GPRS_MT6235B_S01.X7_110121_V1_6_QC_TR.B IN_FLNHYG0UGG0MF1P_5SH0E
Detailed information:
COM10 [VCP0] selected
module v3.31
Device: Autodetect 6228-6268 NAND
Checking data, wait...
Action: read/check information
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8A04:8A01
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0018]: 00AD:007900A50000 [HYNIX] HY27XA081G1M
chip size: 128Mb
page/spare size: 0200/0010
pages per block: 0020
bits i/o: 08
address cycles: 04
internal RAM size: 00010000
external RAM: absent
done
Set baudrate (921600)...
done
ram test...
testing 32bit...
32bit ram test passed
testing 16bit...
16bit ram test passed
ram test passed
===> detect existing firmware structure...
detect ffs...
ffs offset/size: 03400000/04C00000
firmware size: 52Mb
ffs size: 76Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: X7_110121_V1.6_QC_TR
detect NAND info...
number of areas/bytes to read: 1:00034000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
bootloader version: V101_BOOTLOADER_V005_MT6235B_X7_110121_V1_6_QC_TR. bin
nfi area detection (3 cores) finished: Ok
warning: ffs can not be detected
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
number of areas/bytes to read: 1:00004000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
number of areas/bytes to read: 1:00004000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
startup code area #1 is valid
startup code area #1 detection done
rom info ver: 07
sw version: V101_PCB01_GPRS_MT6235B_S01.X7_110121_V1_6_QC_TR.B IN_FLNHYG0UGG0MF1P_5SH0E
project-id: X7_110121_V1.6_QC_TR, 32644A3C
code offset: 00000000
rom info structure: [protected] type (07), 1 record(s)
TCL-ID is absent
===> done
====================
New firmware found (v.3.31, database date: 29.05.2011):
V101_PCB01_GPRS_MT6235B_S01.X7_110121_V1_6_QC_TR.B IN_FLNHYG0UGG0MF1P_5SH0E
This firmware is missing in support area. If this phone is good and working:
- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to http://rapidshare.com or http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
Disconnect...
done
file saved: C:\InfinityBox\ChineseMiracle\backup_security\V101 _PCB01_GPRS_MT6235B_S01.X7_110121_V1_6_QC_TR.BIN_F LNHYG0UGG0MF1P_5SH0E__system_log_20110602-224625.B4X.bin
Finished, time used: 46 sec
Remove/Install battery now !
Слил ff через CM 3.31, - тел после этого включался. Ещё раз слил ff через FlashTool_v3.1108.00, после чего тел включаться перестал.
Отредактировал ff в lpe, залил в тел - всё равно не включается.
Запись ff после lpe:
COM17 [VCP0] selected
module v3.31
Device: Autodetect 6228-6268 NAND
Checking data, wait...
Action: write flash NAND
write: Firmware
editor_corrected_editor_corrected_V101_PCB01_GPRS_ MT6235B_S01.X7_110121_V1_6_QC_TR.BIN_FLNHYG0UGG0MF 1P_5SH0E__fullflash_20110603-004643.B4M.bin.B4M.bin.B4M.bin
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
nfi area detection...
nfi scat area detected (3 areas)
nfi area detection (3 cores) finished: Ok
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8A04:8A01
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0018]: 00AD:007900A50000 [HYNIX] HY27XA081G1M
chip size: 128Mb
page/spare size: 0200/0010
pages per block: 0020
bits i/o: 08
address cycles: 04
internal RAM size: 00010000
external RAM: absent
done
Set baudrate (921600)...
done
ram test...
testing 32bit...
32bit ram test passed
testing 16bit...
16bit ram test passed
ram test passed
===> detect existing firmware structure...
detect ffs...
detect sec ro...
detect custom parameters...
detect project-id...
detect NAND info...
number of areas/bytes to read: 1:00034000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
warning: incorrect header: 5A5A5A5A5A5A5A5A5A5A5A5A5A5A5A5A
warning: can not detect header
nfi area detection (0 cores) finished: failed
warning: ffs can not be detected
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
code offset: 00000000
===> done
====================
New firmware found (v.3.31, database date: 29.05.2011):
This firmware is missing in support area. If this phone is good and working:
- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to http://rapidshare.com or http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
nfi area detection...
nfi scat area detected (3 areas)
nfi area detection (3 cores) finished: Ok
startup code area #1 check...
rpl file not found: C:\InfinityBox\ChineseMiracle\id.00006235.[V101_PCB01_GPRS_MT6235B_S01.X7_110121_V1_6_QC_TR.B IN_FLNHYG0UGG0MF1P_5SH0E_3C4A6432].rpl
rpl file not found: C:\InfinityBox\ChineseMiracle\id.00006235._V101_PC B01_GPRS_MT6235B_S01.X7_110121_V1_6_QC_TR.BIN_FLNH YG0UGG0MF1P_5SH0E_3C4A6432_.rpl
rpl file not found: C:\InfinityBox\ChineseMiracle\backup_security\id.0 0006235.[V101_PCB01_GPRS_MT6235B_S01.X7_110121_V1_6_QC_TR.B IN_FLNHYG0UGG0MF1P_5SH0E_3C4A6432].rpl
rpl file not found: C:\InfinityBox\ChineseMiracle\backup_security\id.0 0006235._V101_PCB01_GPRS_MT6235B_S01.X7_110121_V1_ 6_QC_TR.BIN_FLNHYG0UGG0MF1P_5SH0E_3C4A6432_.rpl
====================
warning: unknown firmware: V101_PCB01_GPRS_MT6235B_S01.X7_110121_V1_6_QC_TR.B IN_FLNHYG0UGG0MF1P_5SH0E_3C4A6432
Unknown firmware found (v.3.31, database date: 29.05.2011), user action required:
1. download latest software from support area and try again
2. if no still luck follow the next procedure:
- find good working phone with the same firmware:
V101_PCB01_GPRS_MT6235B_S01.X7_110121_V1_6_QC_TR.B IN_FLNHYG0UGG0MF1P_5SH0E
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to http://rapidshare.com or http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)
- be little bit patient and wait update
====================
error: startup code area #1 can't be fixed
You can flash phone now but can not finalize it,
in most cases phone CAN NOT power-on.
Do you want to continue anyway ?
number of cores: 3
loading files...
number of areas: 3
done
write...
write bootloader...
.
.
write core...
Disconnect...
done
Finished, time used: 16 min 15 sec
Remove/Install battery now !
Как можно тел поднять?