Lexsis
17.02.2011, 12:18
В общем принесли на русификацию. Забекапил фулл, отредактировал в ленгпак едиторе, прошил. теперь не включайка. Пробовал заливать первоначальный фулл, результат тот же. Уже сутки мучаюсь. Пугает строка в логе "error: startup code area #1 can't be fixed" :kos: Ну естественно лог с исходным бекапом прилагаю. COM15 [ProlificSerial2] selected
module v3.26
Device: Autodetect 6228-6253 NAND
Checking data, wait...
Action: write flash NAND
write: Firmware
BENRUI35_09A_PCB01_GPRS_MT6235B_S01.BR35_V02_65__f ullflash_20110216-161021.B4M.bin
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
nfi area detection...
bootloader version: BENRUI35_09A_BOOTLOADER_V005_MT6235B_BR35_V02_65.b in
nfi area detection (3 cores) finished: Ok
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8B00:8A00
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0017]: 00AD:007600AD0076 [HYNIX] HY27XS08121M
chip size: 64Mb
page/spare size: 0200/0010
pages per block: 0020
bits i/o: 08
address cycles: 04
internal RAM size: 00010000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (921600)...
done
interesting cpu type found: 6235:8B00:8A00
ram test...
testing...
ram test passed
===> detect existing firmware structure...
detect ffs...
ffs offset/size: 02000000/02000000
firmware size: 32Mb
ffs size: 32Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: BR35_V02.07
detect NAND info...
number of areas/bytes to read: 1:00034000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
bootloader version: BENRUI35_09A_BOOTLOADER_V005_MT6235B_BR35_V02_07.b in
nfi area detection (3 cores) finished: Ok
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
number of areas/bytes to read: 1:00004000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
number of areas/bytes to read: 1:00004000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
error: unexpected answer:
startup code area #1 is invalid
startup code area #1 detection done
rom info ver: 07
sw version: BENRUI35_09A_PCB01_GPRS_MT6235B_S01.BR35_V02_07.BI N
project-id: BR35_V02.07, 469FB146
code offset: 00000000
ffs offset/size [01]: 02000000/02000000
rom info structure: [protected] type (07), 1 record(s)
TCL-ID is absent
===> done
nfi area detection...
bootloader version: BENRUI35_09A_BOOTLOADER_V005_MT6235B_BR35_V02_65.b in
nfi area detection (3 cores) finished: Ok
startup code area #1 check...
rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\id.00006235.[BENRUI35_09A_PCB01_GPRS_MT6235B_S01.BR35_V02_65.BI N_7CF9B990].rpl
rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\id.00006235._BENR UI35_09A_PCB01_GPRS_MT6235B_S01.BR35_V02_65.BIN_7C F9B990_.rpl
rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.00006235.[BENRUI35_09A_PCB01_GPRS_MT6235B_S01.BR35_V02_65.BI N_7CF9B990].rpl
rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.00006235._BENRUI35_09A_PCB01_GPRS_MT6235B_S01.BR 35_V02_65.BIN_7CF9B990_.rpl
====================
warning: unknown firmware: BENRUI35_09A_PCB01_GPRS_MT6235B_S01.BR35_V02_65.BI N_7CF9B990
Unknown firmware found (v.3.26, database date: 13.01.2011), user action required:
1. download latest software from support area and try again
2. if no still luck follow the next procedure:
- find good working phone with the same firmware:
BENRUI35_09A_PCB01_GPRS_MT6235B_S01.BR35_V02_65.BI N
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to http://rapidshare.com or http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)
- be little bit patient and wait update
====================
error: startup code area #1 can't be fixed
You can flash phone now but can not finalize it,
in most cases phone CAN NOT power-on.
Do you want to continue anyway ?
number of cores: 3
loading files...
number of areas: 3
done
write...
write bootloader...
.
.
write core...
Disconnect...
done
Finished, time used: 8 min 45 sec
Remove/Install battery now !
фулл BENRUI35_09A_PCB01_GPRS_MT6235B_S01.BR35_V02_65__f ullflash_20110216-161021.B4M
http://depositfiles.com/files/fgvv83qn3
module v3.26
Device: Autodetect 6228-6253 NAND
Checking data, wait...
Action: write flash NAND
write: Firmware
BENRUI35_09A_PCB01_GPRS_MT6235B_S01.BR35_V02_65__f ullflash_20110216-161021.B4M.bin
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
nfi area detection...
bootloader version: BENRUI35_09A_BOOTLOADER_V005_MT6235B_BR35_V02_65.b in
nfi area detection (3 cores) finished: Ok
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8B00:8A00
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0017]: 00AD:007600AD0076 [HYNIX] HY27XS08121M
chip size: 64Mb
page/spare size: 0200/0010
pages per block: 0020
bits i/o: 08
address cycles: 04
internal RAM size: 00010000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (921600)...
done
interesting cpu type found: 6235:8B00:8A00
ram test...
testing...
ram test passed
===> detect existing firmware structure...
detect ffs...
ffs offset/size: 02000000/02000000
firmware size: 32Mb
ffs size: 32Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: BR35_V02.07
detect NAND info...
number of areas/bytes to read: 1:00034000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
bootloader version: BENRUI35_09A_BOOTLOADER_V005_MT6235B_BR35_V02_07.b in
nfi area detection (3 cores) finished: Ok
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
number of areas/bytes to read: 1:00004000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
number of areas/bytes to read: 1:00004000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
error: unexpected answer:
startup code area #1 is invalid
startup code area #1 detection done
rom info ver: 07
sw version: BENRUI35_09A_PCB01_GPRS_MT6235B_S01.BR35_V02_07.BI N
project-id: BR35_V02.07, 469FB146
code offset: 00000000
ffs offset/size [01]: 02000000/02000000
rom info structure: [protected] type (07), 1 record(s)
TCL-ID is absent
===> done
nfi area detection...
bootloader version: BENRUI35_09A_BOOTLOADER_V005_MT6235B_BR35_V02_65.b in
nfi area detection (3 cores) finished: Ok
startup code area #1 check...
rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\id.00006235.[BENRUI35_09A_PCB01_GPRS_MT6235B_S01.BR35_V02_65.BI N_7CF9B990].rpl
rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\id.00006235._BENR UI35_09A_PCB01_GPRS_MT6235B_S01.BR35_V02_65.BIN_7C F9B990_.rpl
rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.00006235.[BENRUI35_09A_PCB01_GPRS_MT6235B_S01.BR35_V02_65.BI N_7CF9B990].rpl
rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.00006235._BENRUI35_09A_PCB01_GPRS_MT6235B_S01.BR 35_V02_65.BIN_7CF9B990_.rpl
====================
warning: unknown firmware: BENRUI35_09A_PCB01_GPRS_MT6235B_S01.BR35_V02_65.BI N_7CF9B990
Unknown firmware found (v.3.26, database date: 13.01.2011), user action required:
1. download latest software from support area and try again
2. if no still luck follow the next procedure:
- find good working phone with the same firmware:
BENRUI35_09A_PCB01_GPRS_MT6235B_S01.BR35_V02_65.BI N
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to http://rapidshare.com or http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)
- be little bit patient and wait update
====================
error: startup code area #1 can't be fixed
You can flash phone now but can not finalize it,
in most cases phone CAN NOT power-on.
Do you want to continue anyway ?
number of cores: 3
loading files...
number of areas: 3
done
write...
write bootloader...
.
.
write core...
Disconnect...
done
Finished, time used: 8 min 45 sec
Remove/Install battery now !
фулл BENRUI35_09A_PCB01_GPRS_MT6235B_S01.BR35_V02_65__f ullflash_20110216-161021.B4M
http://depositfiles.com/files/fgvv83qn3