Увалил MT -5220

[fonefan]

При прошивке по USB последней версией тело стерлось, а далее шить незахотелось. ПО F-bus вываливает тож ошибку:
VPP is DISABLED.
BB5 PM back Phone is in: Phone is not responding!
Processing File: rm411__04.86.mcusw
Boot...

%%%%%%%% ERROR BOOTING:
BB5 PM back Phone is in: Phone is not responding!
Processing File: rm411__04.86.mcusw
Boot...

%%%%%%%% ERROR BOOTING:

= Set Flash mode for info =============
VBat is 3.93V

Vpp pin has 0.00V, Shortcut go ground
Pins:
Mbus 1, Box Tx 1, Box Rx 1, Bsi 0
Boot...
Failed to find RAP3 2nd loader
Phone Type: BB5
------------------- SYSTEM ID Response: 7 blocks -------------
SYSTEM_ASIC_ID( RAP ):
000000010000022600010006030C192101033000
EM_ASIC_ID( RAP ):
00000295
EM_ASIC_ID( RAP ):
00000B22
PUBLIC_ID( RAP ):
26D00106F91603549E58AF86521EF45F5003B701
ASIC_MODE_ID( RAP ):
00
ROOT_KEY_HASH( RAP ):
9DDBFCFE6E73CED7D8C6268C8EB85723
ROM_ID( RAP ):
273F6D55DFAAF68F
============= Set FBus mode for info =============
VBat is 3.91V

Vpp pin has 0.00V, Shortcut go ground
Pins:
Mbus 1, Box Tx 1, Box Rx 1, Bsi 0




Boot...
Failed to find RAP3 2nd loader -вопрос ? Какой нужен загрузчик? :unknw: шил версией 1,53

[Dood]

http://www.mcrf.ru/forum/showthread.php?p=145205#post145205
читай новость с 15го числа. А вообще 1.55 давно есть.

[Evil]

Нужен кабель с TX2 и в сетингах выставить соответствующую галку.

[fonefan]

VPP is DISABLED.
Using Tx2 Data line.
BB5 PM back Phone is in: Phone is not responding!
Processing File: rm411__04.86.mcusw
Boot...
rap3gv3_2nd.fg
RAP3Gv3_algo.fg
CMT Certificates
Erase RAP3 [00000000 - 000006BF]
Erase RAP3 [000006C0 - 0001FFFF]
Erase RAP3 [00040000 - 000BFFFF]
Erase RAP3 [000C0000 - 0013FFFF]
Erase RAP3 [00140000 - 0137FFFF]
Erase RAP3 [01380000 - 0151FFFF]
Erase[21.00 MB]...
Waiting response for 320 Sec...in 5.05s
Flash[19.80 MB]...
Data Error!!
Check TX2 line!

%%%%%%%% ERROR SENDING FLASH:
Failed at address 00000000

вот и 1,55 версии лог


а вот когда делаешь чек

= Set Flash mode for info =============
VBat is 3.90V

Vpp pin has 0.09V, Not Connected
Pins:
Mbus 1, Box Tx 1, Box Rx 1, Bsi 0
Boot...
Using Tx2 Data line.
rap3gv3_2nd.fg
RAP3Gv3_algo.fg
BOOT OK...
Phone Type: BB5
------------------- SYSTEM ID Response: 7 blocks -------------
SYSTEM_ASIC_ID( RAP ):
000000010000022600010006030C192101033000
EM_ASIC_ID( RAP ):
00000295
EM_ASIC_ID( RAP ):
00000B22
PUBLIC_ID( RAP ):
26D00106F91603549E58AF86521EF45F5003B701
ASIC_MODE_ID( RAP ):
00
ROOT_KEY_HASH( RAP ):
9DDBFCFE6E73CED7D8C6268C8EB85723
ROM_ID( RAP ):
273F6D55DFAAF68F
--------------- Device ID Response: 3 blocks -------------
Storage Device:
Owner Asic: RAP
Type: NOR Flash
Index: 0
Flash: Intel, 0089 8982 0000 0000
Storage Device Contents:
Owner Asic: RAP
0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
============= Set FBus mode for info =============
VBat is 3.90V

Vpp pin has 0.09V, Not Connected
Pins:
Mbus 1, Box Tx 1, Box Rx 0, Bsi 0

[slav-on]

У меня тоже проблемы были с USB с этой моделью.По F-BUS c TX2 все нормально
Версия 1.54