Китайский Ferrari не шьется

[Mixa]

Прочитался нормально только последним ChineseMiracle 2.43, 2.40 его не читал, не читает его и родной флешер FlashTool v3.2.00 - v4.11
http://rapidshare.com/files/116107021/backup_flash_NEOTEL25_06B_PCB01_GPRS_MT6225_S00_RD C26_06BW0720MPV21_V002_CAR_AFE_BIN__20080519-23043.html

При попытке влить откоректированую флеш зашивается только до 60%
COM13 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: write NOR flash
"smart write" active
write: Firmware
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6225:8A03:8A00]...
CPU: MT6225
high speed boot enabled
chip: 0001:7503:000B
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 89890000040089:89890000000000
flash: 89890000040089:89890000000000
flash: Intel 128MBit non-mux U 8Mb
detecting chip #01 in region #00...
flash: 89890000040089:89890000000000
flash: 89890000040089:89890000000000
flash: Intel 128MBit non-mux U 8Mb
detecting chip #02 in region #00...
flash: 89890000040089:89890000000000
flash: 89890000040089:89890000000000
flash: Intel 128MBit non-mux U 8Mb
detecting chip #03 in region #00...
flash: 89890000040089:89890000000000
flash: 89890000040089:89890000000000
flash: Intel 128MBit non-mux U 8Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud...
460800
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.F3D5FA84.[NEOTEL25_06B_PCB01_GPRS_MT6225_S00.RDC26_06BW0720M PV21_V002_CAR_AFE.BIN_26ADB2F7].rpl
====================
New firmware detected:
NEOTEL25_06B_PCB01_GPRS_MT6225_S00.RDC26_06BW0720M PV21_V002_CAR_AFE.BIN

- make "Read full flash" operation
- send "backup_system_log_..." file to support: [email protected]
- send flash backup file(s) to support: [email protected]
- include in your e-mail full text from phone back label (phone name etc.)
====================
identification#1 detection finished
device-id: F3D5FA84
identification#1 protocol ver: 04
ver. sw1: NEOTEL25_06B_PCB01_GPRS_MT6225_S00.RDC26_06BW0720M PV21_V002_CAR_AFE.BIN
ver. sw2: RDC26_06BW0720MPV21_V002_CAR_AFE, 084D52D9
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
warning: rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\id.F3D5FA84.[NEOTEL25_06B_PCB01_GPRS_MT6225_S00.RDC26_06BW0720M PV21_V002_CAR_AFE.BIN_26ADB2F7].rpl
warning: rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\id.F3D5FA84._NEOT EL25_06B_PCB01_GPRS_MT6225_S00.RDC26_06BW0720MPV21 _V002_CAR_AFE.BIN_26ADB2F7_.rpl
security area#1 backup loaded
security area#1 calculation...
done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_system_log _F3D5FA84_NEOTEL25_06B_PCB01_GPRS_MT6225_S00.RDC26 _06BW0720MPV21_V002_CAR_AFE.BIN_26ADB2F7_20080520-090156.B0X.bin
Area: Firmware
flash: 89890000040089:89890000000000
flash: 89890000040089:89890000000000
Write: Firmware
error: error# 000000B0
20:5[01]: Erase fail or program sequence error when set with SR[4,7].
10:4[01]: Program fail or program sequence error when set with SR[5,7].
error: flash write error: 004C0000:00002000
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
Write Fail
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_system_log _F3D5FA84_NEOTEL25_06B_PCB01_GPRS_MT6225_S00.RDC26 _06BW0720MPV21_V002_CAR_AFE.BIN_26ADB2F7_20080520-090217.B0X.bin
Finished, time used: 50 sec
Remove/Install battery now !

Родной фул тоже льется только до 60%, аппарат теперь мертвый, акб заряжена, может кто подскажет как его вернуть к жизни?

[Ecco]

New firmware detected:
NEOTEL25_06B_PCB01_GPRS_MT6225_S00.RDC26_06BW0720M PV21_V002_CAR_AFE.BIN

- make "Read full flash" operation
- send "backup_system_log_..." file to support: [email protected]
- send flash backup file(s) to support: [email protected]
- include in your e-mail full text from phone back label (phone name etc.)
Отправь на поддержку full,eeprom и backup system log,это обязательно
Пробовал скорость понизить,когда заливаешь родной full?

[IHelper]

Прочитался нормально только последним ChineseMiracle 2.43, 2.40 его не читал, не читает его и родной флешер FlashTool v3.2.00 - v4.11
http://rapidshare.com/files/116107021/backup_flash_NEOTEL25_06B_PCB01_GPRS_MT6225_S00_RD C26_06BW0720MPV21_V002_CAR_AFE_BIN__20080519-23043.html

При попытке влить откоректированую флеш зашивается только до 60%
COM13 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: write NOR flash
"smart write" active
write: Firmware
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6225:8A03:8A00]...
CPU: MT6225
high speed boot enabled
chip: 0001:7503:000B
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 89890000040089:89890000000000
flash: 89890000040089:89890000000000
flash: Intel 128MBit non-mux U 8Mb
detecting chip #01 in region #00...
flash: 89890000040089:89890000000000
flash: 89890000040089:89890000000000
flash: Intel 128MBit non-mux U 8Mb
detecting chip #02 in region #00...
flash: 89890000040089:89890000000000
flash: 89890000040089:89890000000000
flash: Intel 128MBit non-mux U 8Mb
detecting chip #03 in region #00...
flash: 89890000040089:89890000000000
flash: 89890000040089:89890000000000
flash: Intel 128MBit non-mux U 8Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud...
460800
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.F3D5FA84.[NEOTEL25_06B_PCB01_GPRS_MT6225_S00.RDC26_06BW0720M PV21_V002_CAR_AFE.BIN_26ADB2F7].rpl
====================
New firmware detected:
NEOTEL25_06B_PCB01_GPRS_MT6225_S00.RDC26_06BW0720M PV21_V002_CAR_AFE.BIN

- make "Read full flash" operation
- send "backup_system_log_..." file to support: [email protected]
- send flash backup file(s) to support: [email protected]
- include in your e-mail full text from phone back label (phone name etc.)
====================
identification#1 detection finished
device-id: F3D5FA84
identification#1 protocol ver: 04
ver. sw1: NEOTEL25_06B_PCB01_GPRS_MT6225_S00.RDC26_06BW0720M PV21_V002_CAR_AFE.BIN
ver. sw2: RDC26_06BW0720MPV21_V002_CAR_AFE, 084D52D9
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
warning: rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\id.F3D5FA84.[NEOTEL25_06B_PCB01_GPRS_MT6225_S00.RDC26_06BW0720M PV21_V002_CAR_AFE.BIN_26ADB2F7].rpl
warning: rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\id.F3D5FA84._NEOT EL25_06B_PCB01_GPRS_MT6225_S00.RDC26_06BW0720MPV21 _V002_CAR_AFE.BIN_26ADB2F7_.rpl
security area#1 backup loaded
security area#1 calculation...
done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_system_log _F3D5FA84_NEOTEL25_06B_PCB01_GPRS_MT6225_S00.RDC26 _06BW0720MPV21_V002_CAR_AFE.BIN_26ADB2F7_20080520-090156.B0X.bin
Area: Firmware
flash: 89890000040089:89890000000000
flash: 89890000040089:89890000000000
Write: Firmware
error: error# 000000B0
20:5[01]: Erase fail or program sequence error when set with SR[4,7].
10:4[01]: Program fail or program sequence error when set with SR[5,7].
error: flash write error: 004C0000:00002000
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
Write Fail
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_system_log _F3D5FA84_NEOTEL25_06B_PCB01_GPRS_MT6225_S00.RDC26 _06BW0720MPV21_V002_CAR_AFE.BIN_26ADB2F7_20080520-090217.B0X.bin
Finished, time used: 50 sec
Remove/Install battery now !

Родной фул тоже льется только до 60%, аппарат теперь мертвый, акб заряжена, может кто подскажет как его вернуть к жизни?

Придется ждать нового обновления, т.к. мало того, что новая прошивка, но и тип флеши новый.
Обновление будет сегодня-завтра.

------------------------

Новый ChineseMiracle на суппорте, плз пробуй шить.

[oleg.ch]

Придется ждать нового обновления, т.к. мало того, что новая прошивка, но и тип флеши новый.
Обновление будет сегодня-завтра.

------------------------

Новый ChineseMiracle на суппорте, плз пробуй шить.
Шил такой недавно Хинтелом,проблем небыло...если надо могу фул под него скинуть.

[IHelper]

@oleg.ch
"такой" это какой ? По каким параметрам "такой" ?

[Mixa]

Новый ChineseMiracle на суппорте, плз пробуй шить.
Все заработало, аппарат ожил!

Шил такой недавно Хинтелом,проблем небыло...если надо могу фул под него скинуть.
Врядли вы такой шили, с новой интеловской флешкой PF38F30xxM0x0xx, его даже последний родной китайский флешер FlashTool_v3.748.0 не шьет, только читает.

[oleg.ch]

@oleg.ch
"такой" это какой ? По каким параметрам "такой" ?
Телефон сделан как машинка!
Вот версия прошивки:MTK_ROMINFO_v04 NEOTEL25_06B_PCB01_GPRS_MT6225_S00.RDC26_06BW0720M PV21_V002_CAR_AFE.BIN
Шил VeMTK_42_en + добавлял языки и шрифты,в прошивки был,английский,французкий и арабский помойму...