новичек
01.03.2008, 16:37
Есть тело с прошивкой CM_Nokia-8800i_Sony-Ericsson-K750i_CKT26_05C_PCB01_GPRS_MT6226_S00.WOLF_1_12_SA XX0V0SP64XXC_626_RU убит EEPROM, заливал с сапорта похожую с EEPROM-ом N91_8m_CKT26_05C_PCB01_GPRS_MT6226_S00.WOLF_1_12_S AXX0V0SP64XXC_626_VI_8m_En_Vn_w_eeprom не помогло и инфинити не может определить FFS вот лог
total flash region size: 01000000
detect device identification#1...
detection phase #1...
.
detection phase #2...
.................................................. .................................................. ............................
warning: identification#1 information not found, possible reasons:
.old firmware type w/o identification#1 data
.damaged firmware
.damaged hardware
if phone works fine just ignore this warning
detect device identification#1 finished
detect device identification#2...
detection phase #1...
.
warning: optional information not found
detect device identification#2 finished
detecting eeprom/ffs area in 2 chip(s)...
standard eeprom/ffs offset assigned: 00E00000
flash: EC22E000000000:29AA0000000000
checking area[00000000]: 00000000-007FFFFF...
flash: EC22E000000000:FFBFFF00000000
checking area[00800000]: 00000000-007FFFFF...
Can't detect eeprom/ffs area
Do you want to use standard ffs address: 00E00000 ?
If you are not sure that standard address is correct:
1. press "NO" and terminate current operation
2. make flash backup for emergency case
3. repeat required operation
standard ffs address selected by user
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 01
eeprom/ffs area: 00800000:00600000-007FFFFF
detecting ffs structure pass 1...
.................................................. ......
can't detect fat name location
ffs element #1 detection failed
detecting ffs structure pass 2...
.................................................. ......
can't detect fat name location
ffs element #2 detection failed
error: autodetection failed
Finished, time used: 69 sec
Remove/Install battery now !
даже если фулл чужой FFS должен определять?
total flash region size: 01000000
detect device identification#1...
detection phase #1...
.
detection phase #2...
.................................................. .................................................. ............................
warning: identification#1 information not found, possible reasons:
.old firmware type w/o identification#1 data
.damaged firmware
.damaged hardware
if phone works fine just ignore this warning
detect device identification#1 finished
detect device identification#2...
detection phase #1...
.
warning: optional information not found
detect device identification#2 finished
detecting eeprom/ffs area in 2 chip(s)...
standard eeprom/ffs offset assigned: 00E00000
flash: EC22E000000000:29AA0000000000
checking area[00000000]: 00000000-007FFFFF...
flash: EC22E000000000:FFBFFF00000000
checking area[00800000]: 00000000-007FFFFF...
Can't detect eeprom/ffs area
Do you want to use standard ffs address: 00E00000 ?
If you are not sure that standard address is correct:
1. press "NO" and terminate current operation
2. make flash backup for emergency case
3. repeat required operation
standard ffs address selected by user
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 01
eeprom/ffs area: 00800000:00600000-007FFFFF
detecting ffs structure pass 1...
.................................................. ......
can't detect fat name location
ffs element #1 detection failed
detecting ffs structure pass 2...
.................................................. ......
can't detect fat name location
ffs element #2 detection failed
error: autodetection failed
Finished, time used: 69 sec
Remove/Install battery now !
даже если фулл чужой FFS должен определять?