COM8 [Serial2] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read NOR flash
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 98004900000002:29EA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
460800
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 98004900000002:29EA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification, method #1...
detection phase #1...
detect device parameters finished
structure: 2nd [enhanced] (or higher) generation
identification data Ok
identification data backup saved: id.DFD25854.[TELSDA26_05C_PCB01_GPRS_MT6226_S01.MAUI_05C_W06_16_MP_V28.BIN_1CDD56D2].rpl
New firmware detected: TELSDA26_05C_PCB01_GPRS_MT6226_S01.MAUI_05C_W06_16_MP_V28.BIN
- make "Read detailed information, ask/rpl" operation
- send "backup_system_log_..." file to support
- make "Read full flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone name etc.)
identification detection finished
device-id: DFD25854
protocol ver: 04
ver. sw1: TELSDA26_05C_PCB01_GPRS_MT6226_S01.MAUI_05C_W06_16_MP_V28.BIN
ver. sw2: MAUI.05C.W06.16.MP.V28
ffs offset/size: 00E00000/00200000
detecting eeprom area in 1 chip(s)...
flash: 98004900000002:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area: 00000000:00E00000-00FFFFFF
reading [flash[TELSDA26_05C_PCB01_GPRS_MT6226_S01.MAUI_05C_W06_16_MP_V28.BIN]]...
warning: wrong data size at 0x00CDBC00, retry...
warning: wrong data size at 0x00CDBC00, retry...
warning: wrong data size at 0x00CDBC00, retry...
warning: wrong data size at 0x00CDBC00, retry...
warning: wrong data size at 0x00CDBC00, retry...
warning: wrong data size at 0x00CDBC00, retry...
warning: wrong data size at 0x00CDBC00, retry...
warning: wrong data size at 0x00CDBC00, retry...
warning: wrong data size at 0x00CDBC00, retry...
error: too many retries during read operation
Probably errors exist during flash read operation.
Do you want to repeat read operation ?