card found: S/N xxxxxxxx
registered to: mel0man
Connect phone on selected interface...
Phone found!
Series 40 Device detected!
read info... - Ok
Reading Phone Info....
Connected phone - Nokia X2-00
Software ver : V 04.80 03-08-10 RM-618 (c) Nokia
IMEI : 353423044760731
Ape Ver :
APE Var :
APE ADSP:
DSP Ver :
APE Test:
PPM : V 04.80 03-08-10 RM-618 (c) Nokia I
CNT : Content: ctv UA V 04.80 03-08-10 RM-618 (c) Nokia
Product SN : DNP156163
Product code : 059D1J1
Base Prd.code: 0591973
Module code : 0204491
Long Prod.SN : 0
Hardware info=======
HWID : 1000
Retu :
Tahvo :
Batery: 4102 mV
Camera:
CMT BT: 2.31-SP2.31
APE BT:
APE HW:
LCDVer: SEIKO
RF ic :
Lock info ===========
IMEI : 353423044760731
IMEI spNet : 3A 35 24 03 44 67 70 03
IMEI svNet : 33 35 24 03 44 67 70 13 F2
Conf key : 0000000000000000
Provider key : 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7
LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
CRT308 Backup Created...
User Code : 12345
MMC pwd : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]
Done!
Read and Check phone data...
----------------------
RAP_BOOT: 0000000000000000
RAP_PUB: 0000000000FCB376899DA92C438C97B402E10D58
CMT_ROOT: 1B0D74C532CA1C6133940C740E8C786E
RAP_PAPUB: E9700989029D9E899915F781B1582048E042A738
----------------------
Live Test Ok!
----------------------
CMT Flash ID : 00300020 < UNKNOW [NOT IN BASE]
CNT sector : 64 kb
------------------------
SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security is Ok
PA_SimLock Version :
PA_SL3 phone detected
Done!
Core version : 1.16 , Rev : 2.1
Selected FlashSettings : FullFlash
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : rm618__04.90.mcusw
PPM : rm618__04.90.ppm_i
CNT : rm618__04.90.image_i_0595063_005
Flashing phone now...
Check files done...
-> Check SW version...
FlashFile version : 04.90
Phone version : 04.80 03-08-10 RM-618 (c) Nokia
-> Check SW version : Upgrade
Backup CRT308 data...
CRT308 Backup Created...
Check communication with phone....
ADL req restart
Communication verify done... Preparing...
Gathering phone info...
Check communication with phone...
Reboot....
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000000000000022000509200C0000
EM0 ID: 00005361
PUBLIC ID: 0000000000FCB376899DA92C438C97B402E10D58
ASIC MODE ID: 00
ROOT KEY HASH: 1B0D74C532CA1C6133940C740E8C786E
ROM ID: DE56D582BDDE7A3A
Use BCM21351_usb2nd.fg , Rev : 2.1 Ver : 10.50.0
Processing RAWLOADER...
FLIC : 00300020
Req : XSR 1.6
Use BCM21351_XSR16_usbalg.fg , Rev : 2.1 Ver : 10.50.0
Boot Done!
TIME : Boot time : 00:00:00
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
ADL: phone is in flash mode
Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 353423044760731
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Cert Read done!
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
SimLock Data saved...
SimLock Key saved...
WMDRM_PD Data saved...
RPL saved : C:\BEST_v1.15\Backup\Cert\353423044760731.rpl
===Flashing [MCU]===
Erase : Processing rm618__04.90.mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm618__04.90.mcusw
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [ISA+DYNSW]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [MCUSW1]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [UPDAPP]
Total writen 506 blocks
TIME : Write time : 00:00:05
MCU Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000
===Flashing [PPM]===
Erase : Processing rm618__04.90.ppm_i
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm618__04.90.ppm_i
Total writen 109 blocks
TIME : Write time : 00:00:01
PPM Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000
===Flashing [CNT]===
Erase : Processing rm618__04.90.image_i_0595063_005
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01
Write : Processing rm618__04.90.image_i_0595063_005
Total writen 331 blocks
TIME : Write time : 00:00:03
CNT Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000
ADL: Close_Session
Content: 000300000000000000000000000000
ADL: Reboot
Flashing done!
Total flash time : 00:00:12
Reboot phone now...
Reading Phone Info....
Connected phone - Nokia X2-00
Software Info: V 04.90 28-09-10 RM-618 (c) Nokia
IMEI: 353423044760731
PPM version : V 04.90 28-09-10 RM-618 (c) Nokia I
Product code: 059D1J1
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
FullFactorySet...OK!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Product code update...
Checking User Certificates...
Total - 39 certs
Data exist, skip certificate repair...
Set phone to Normal mode...
AfterFlash operations done...
Done!
Elapsed: 00:01:53
Connect phone on selected interface...
[свернуть]
Последние файлы
