Boot...
                    Using Tx2 Data line.
Trying boot BB5 phone...

     #  SYSTEM_ASIC_ID( RAP ): 000000010000022600010006400C192101051103
     #  EM_ASIC_ID( RAP ): 00000296
     #  EM_ASIC_ID( RAP ): 00000B22
     #  PUBLIC_ID( RAP ): 0360010277A600524C5FC02EEBC53984763F223D
     #  ASIC_MODE_ID( RAP ): 00
     #  ROOT_KEY_HASH( RAP ): 479C6DDE3942E12C429C1D6ADED80371
     #  ROM_ID( RAP ): 4B9B75103E691FF8
	Version 010.043.000.
	Revision 0200 (512)
	eBB5ProtocolType=New
	BusType 0001
RAPIDOv11_2nd.fg
	Processed KeyCertificate DCT5
	Processed CommonHeader DCT5
	Processed Application DCT5
Phone Reported Default Transmitions mode: DDR&TX2
     # RAM:
     # MMC:
     # NOR:RAP:0-SGS, 0020 0040 0000 0031
     # NOR:
     # MuxOneNAND:RAP:0-SGS, 0020 0040 0000 0031
     #   Asic RAP loader:	XSR 1.5
	Version 010.043.000.
	Revision 0200 (512)
eBB5ProtocolType=New
RAPIDOv11_XSR15_alg.fg
  Manufacturer Code : 0020
  Device ID         : 0040
  Extended/Fixed ID : 0000
  Revision ID       : 0000
  Size              : 10000000 (256.00)
  VPP Info          : 0000
Erase 300 s,BlockErase 2 s, BlockFlash 50 s
Delay for loader to take control...
Phone Reported Default Transmitions mode: DDR&TX2
BOOT OK CMT New Protocol
Phone doesn't have APE
Phone Type: BB5
------------------- SYSTEM ID Response: 7 blocks -------------
SYSTEM_ASIC_ID( RAP ):
	000000010000022600010006400C192101051103
EM_ASIC_ID( RAP ):
	00000296
EM_ASIC_ID( RAP ):
	00000B22
PUBLIC_ID( RAP ):
	0360010277A600524C5FC02EEBC53984763F223D
ASIC_MODE_ID( RAP ):
	00
ROOT_KEY_HASH( RAP ):
	479C6DDE3942E12C429C1D6ADED80371
ROM_ID( RAP ):
	4B9B75103E691FF8
---------------    Device ID Response: 6 blocks    -------------
Storage Device:
 Owner Asic: RAP
RAM
 Index: 0
 Flash: 	NotUsed, 0000 0000 0000 0000
Storage Device:
 Owner Asic: RAP
MMC
 Index: 0
 Flash: 	Unkown, FFFF 0000 0000 0000
Storage Device:
 Owner Asic: RAP
NOR
 Index: 0
 Flash: 	SGS, 0020 0040 0000 0031
Storage Device:
 Owner Asic: RAP
NOR
 Index: 1
 Flash: 	NotUsed, 0000 0001 0000 0000
Storage Device:
 Owner Asic: RAP
MuxOneNAND
 Index: 0
 Flash: 	SGS, 0020 0040 0000 0031
 Asic RAP loader:	XSR 1.5
============= Set FBus mode for info =============
VBat is 3.89V

Vpp pin has 0.09V, Not Connected
Pins:
     Mbus 1, Box Tx 1, Box Rx 1, Bsi 0
Scanning files, please wait...
Done
	Selected Highest installed version: 52.0.007
Mcu	RM-356_52.0.007_prd.core.C00
Ppm	RM-356_52.0.007_prd.rofs2.V05
Ppm	RM-356_52.0.007_C04_prd.rofs3.fpsx
Content	RM-356_52.0.007_026_000_U01.uda.fpsx
MemoryCardContent
	5800_SW_0634466_EURASIA_8G_3.0.fpsx
                    VPP is DISABLED.
                    Using Tx2 Data line.
Processing File:  RM-356_52.0.007_prd.core.C00
Boot...
RAPIDOv11_2nd.fg
RAPIDOv11_XSR15_alg.fg
Failed to recieve transmition mode from phone

Boot...
MCU SW incompatible with ASIC
RAPIDOv11_2nd.fg
RAPIDOv11_XSR15_alg.fg
Failed to set VPP
Erase CMT:MuxOneNAND [00040000 - 00082FFF]
Erase CMT:MuxOneNAND [00083400 - 003FFFFF]
Erase CMT:MuxOneNAND [00400000 - 007FFFFF]
Erase CMT:MuxOneNAND [00800000 - 00D5FFFF]
Erase CMT:MuxOneNAND [00D60000 - 0A81FFFF]
Erase[167.87 MB]...
Waiting response for  132 Sec...in 1.31s
Flash[6.40 MB]...in 9.83s 
* * Processed file in 18.34 seconds

 
Model: RM-504
	V ICPR72_10w25.3/11-10-10/RM-504 (c) Nokia
    IMEI: 359368030678724
                    VPP is DISABLED.
                    Using Tx2 Data line.
Processing File:  RM-504_32.0.007_prd.core.C00
Boot...
RAPIDOv11_2nd.fg
RAPIDOv11_XSR15_alg.fg
Failed to recieve transmition mode from phone

%%%%%%%% ERROR BOOTING: