Done
Selected Highest installed version: 062.001
Mcu rm645_062.001_prd.core.fpsx
Content RM645_ENO_10wk48v0.001.fpsx
Ppm rm645_062.001_05.01_Russian_prd.rofs2.fpsx
Ppm rm645_062.001_C00.01_DEFAULT_prd.rofs3.fpsx
Content rm645_062.001_U000.000_prd.uda.fpsx
MemoryCardContent
Eve_SW_MC10_Eurasia_2G_5.0.fpsx
FAILED to find USB Device.
Attach phone to usb port!
Switched to USB BUS
Using Tx2 Data line.
BB5 PM back Phone is in: Phone is not responding!
Processing File: rm645_062.001_prd.core.fpsx
Boot...
CONNECT PHONE to USB and Power ON phone!
Pooling for phone...
\\?\nmwcd#vid_0421&pid_0106&if_oth#6&306857f8&1&00#{4f919102-4adf-11d5-882d-00b0d02fe381}
RAPUv11_2nd.fg
Sending ULO code
RAPUv11_XSR17_alg.fg
Pooling for device removal...
Pooling for ADL device...
\\?\nmwcd#vid_0421&pid_0106&if_oth#6&306857f8&1&00#{4f919102-4adf-11d5-882d-00b0d02fe381}
CMT Certificates
NPC 0x0200
HWC 0x0100
CCC 0x0200
C:\Program Files\GriffinTeam\MT-Box\rpls\353792047733337_0.rpl
Erase[311.00 MB]...
erasing RAP [00020000 to 0003FFFF]
erasing RAP [00060000 to 004DFFFF]
erasing RAP [008E0000 to 0AE3FFFF]
erasing RAP [004E0000 to 008DFFFF]
erasing RAP [06D40000 to 0A03FFFF]
erasing RAP [0A040000 to 0AE3FFFF]
erasing RAP [0AE40000 to 0F63FFFF]
in 2.81s
Flash[92.54 MB]...in 13.30s
* * Processed file in 26.20 seconds
Processing File: RM645_ENO_10wk48v0.001.fpsx
Boot...
\\?\nmwcd#vid_0421&pid_0106&if_oth#6&306857f8&1&00#{4f919102-4adf-11d5-882d-00b0d02fe381}
Erase[0.00 MB]...
in 0.00s
Flash[2.25 MB]...in 0.38s
* * Processed file in 0.39 seconds
Processing File: rm645_062.001_05.01_Russian_prd.rofs2.fpsx
Boot...
\\?\nmwcd#vid_0421&pid_0106&if_oth#6&306857f8&1&00#{4f919102-4adf-11d5-882d-00b0d02fe381}
Erase[0.00 MB]...
in 0.00s
Flash[47.59 MB]...in 6.83s
* * Processed file in 6.86 seconds
Processing File: rm645_062.001_C00.01_DEFAULT_prd.rofs3.fpsx
Boot...
\\?\nmwcd#vid_0421&pid_0106&if_oth#6&306857f8&1&00#{4f919102-4adf-11d5-882d-00b0d02fe381}
Erase[0.00 MB]...
in 0.00s
Flash[0.01 MB]...in 0.00s
* * Processed file in 0.03 seconds
Processing File: rm645_062.001_U000.000_prd.uda.fpsx
Boot...
\\?\nmwcd#vid_0421&pid_0106&if_oth#6&306857f8&1&00#{4f919102-4adf-11d5-882d-00b0d02fe381}
Erase[0.00 MB]...
in 0.00s
Flash[1.32 MB]...in 0.66s
* * Processed file in 0.67 seconds
Restarting device...
Pooling for device removal...
Pooling for device removal...
Device disconnected.
* * * Phone flashing done in 0:34 minutes
Post Flash serial tunning of phone....
Pooling mode for full factory set...
Phone not responding, try to set manually!
Dynamic camera configuration...
Pooling mode for profile update...
RM-645\RM645_0593717_062.001_999.dcpf\062.001\ProductProfile_EURO.xml
Sending Profile to Phone...Fail

Pre flash tasks finished, continuing...
Processing rm645_062.001_prd.core.fpsx (CMT)...
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102031104
CMT_EM_ASIC_ID: 00000C35
CMT_EM_ASIC_ID: 00000C30
CMT_PUBLIC_ID: 18100203DD9403449D1C9145493BD76589B28D1D
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 916F75217F32081248B15C38DFC8E81B
CMT_BOOT_ROM_CRC: E693EF0D
CMT_SECURE_ROM_CRC: AC22615B
CMT Ready!
rm645_062.001_prd.core.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
Searching for BootCode: DualLine 32Bit
RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.48.1, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Waiting for USB Boot ROM Answer...
ROM Ret: 0xFFFD125D
ROM CMT dwAddr: 0x10004FF0
ROM CMT dwLength: 0x00627837
Seems ROM Initialized OK!
Transmission Mode Requested: Control USB, Accepted: Control USB
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0020004000000031, ST, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x0020004000000031, ST, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.10.48.1, Algo: XSR 1.6
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Transmission Mode Requested: Bulk USB, Accepted: Bulk USB
Box TX2 Data Pin set to: Service Pin 3
Waiting for FUR Client become avaiable...
[Nokia USB Flashing Generic]: Port opened OK!
FUR Avaiable!
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Overriding VPP Setting, USB can't use VPP
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: D7D05CFC982BF1491F4BE3FE0F28D3016DA5E057
Sending Certificates...
Certificates OK
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x00020000-0x0003FFFF, ONENAND
EraseArea[0,CMT]: 0x00060000-0x004DFFFF, ONENAND
EraseArea[0,CMT]: 0x008E0000-0x0AE3FFFF, ONENAND
Erase Partition (CMT)
Waiting 320s for erasure finish...
Erase taken 0.734s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT ADA Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT RAP3NAND Certificate...
Writing CMT SOS+PMML Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT GENIO_INIT Certificate...
Writing CMT SOS*UPDAPP Certificate...
Writing CMT SOS*DSP0 Certificate...
Writing CMT LDSP Certificate...
Writing CMT SOS*ISASW Certificate...
Writing CMT SOS+CORE Certificate...
Writing CMT SOS+ROFS1 Certificate...
Programming Status OK!
All blocks written OK! Time taken 14.250s
Flashing Speed: 54473,27 kBit/S
Processing rm645_062.001_prd.core.fpsx (APE)...
Processing RM645_ENO_10wk48v0.001.fpsx (CMT)...
RM645_ENO_10wk48v0.001.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
PAPUBKEYS Hash for CMT: D7D05CFC982BF1491F4BE3FE0F28D3016DA5E057
Sending Certificates...
Certificates OK
Started group flash erase
EraseArea[0,CMT]: 0x004E0000-0x008DFFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 0.15s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT SOS*ENO Certificate...
Programming Status OK!
All blocks written OK! Time taken 0.391s
Flashing Speed: 48191,49 kBit/S
Processing RM645_ENO_10wk48v0.001.fpsx (APE)...
Processing rm645_062.001_05.01_Russian_prd.rofs2.fpsx (CMT)...
rm645_062.001_05.01_Russian_prd.rofs2.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
PAPUBKEYS Hash for CMT: D7D05CFC982BF1491F4BE3FE0F28D3016DA5E057
Started group flash erase
EraseArea[0,CMT]: 0x06D40000-0x0A03FFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 0.218s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT SOS+ROFS2 Certificate...
Programming Status OK!
All blocks written OK! Time taken 6.922s
Flashing Speed: 57674,76 kBit/S
Processing rm645_062.001_05.01_Russian_prd.rofs2.fpsx (APE)...
Processing rm645_062.001_C00.01_DEFAULT_prd.rofs3.fpsx (CMT)...
rm645_062.001_C00.01_DEFAULT_prd.rofs3.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
PAPUBKEYS Hash for CMT: D7D05CFC982BF1491F4BE3FE0F28D3016DA5E057
Started group flash erase
EraseArea[0,CMT]: 0x0A040000-0x0AE3FFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 0.62s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT SOS+ROFS3 Certificate...
Programming Status OK!
All blocks written OK! Time taken 0.63s
Flashing Speed: 1034,16 kBit/S
Processing rm645_062.001_C00.01_DEFAULT_prd.rofs3.fpsx (APE)...
Processing rm645_062.001_U000.000_prd.uda.fpsx (CMT)...
rm645_062.001_U000.000_prd.uda.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
PAPUBKEYS Hash for CMT: D7D05CFC982BF1491F4BE3FE0F28D3016DA5E057
Started group flash erase
EraseArea[0,CMT]: 0x0AE40000-0x0F63FFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 0.313s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 0.594s
Flashing Speed: 18705,76 kBit/S
Processing rm645_062.001_U000.000_prd.uda.fpsx (APE)...
Restarting MCU...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Phone not detected at USB -> Timeout, no any compatible USB device detected.
Phone not detected at USB -> Timeout, no any compatible USB device detected.
Phone not detected at USB -> Timeout, no any compatible USB device detected.
Phone not detected at USB -> Timeout, no any compatible USB device detected.
Phone not detected at USB -> Timeout, no any compatible USB device detected.
Factory defaults OK
Reading info...
Phone not detected at USB -> Timeout, no any compatible USB device detected.
Failed to read info -> Phone not detected
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!