Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info...  - Ok

Reading Phone Info....
Connected phone -    Nokia C6-01
Software ver : V 79_sr1_11w42.5 25-11-11 RM-601 (c) Nokia
IMEI    :      358627048165557
Ape Ver :      111.030.0609
APE Var :      111.030.0609111.030.0609.04.01111.030.0609.C00.01
APE ADSP:      256
DSP Ver :      79_SR1_11w42.5
APE Test:      0.064
PPM     :      
CNT     :      
Product SN   :     0
Product code :     059C3X9
Long Prod.SN :     0
Hardware info=======
HWID  : 
Retu  : 40
Tahvo : 00
Batery: 4017 mV
APE BT: HCI Version 4 (rev. 0). LMP Version 4 (rev. 7455). Manufacturer 13.
APE HW: 256
Lock info ===========
IMEI       : 358627048165557
IMEI spNet : 3A 85 26 07 84 61 55 05 
IMEI svNet : 33 85 26 07 84 61 55 35 F3 

Conf key     : 0000000000000000
Provider key : 2440700000000000
Provider    : AT&T;U.S.A. (3650)
Counters   : Key 0  [3] , Fbus 0  [10]
Blocks      : 7

LOCK STATUS :
=============================
BLK : 1
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS :  All Open
=============================
CRT308 Backup Created

SDD key status : Ok
SimLock status : Ok
Security status : Ok
PA_SL3 phone ,  SP_CODE_LEN : 15

User code : Crypted
UserDataExLevel : Low [Gallery] , FullFlash method 

Done!

Phone disconected!

Connect phone on selected interface...

Core : v1.47 , FlashEngine : v1.5

Selected FlashSettings : FullFlash
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : RM-718_111.030.0609_79u_prd.core.fpsx
PPM : RM-718_111.030.0609_04.01_Russian_79u_prd.rofs2.fpsx
PPM2 : RM-718_111.030.0609_C00.01_79u_prd.rofs3.fpsx
CNT : RM-718_111.030.0609_U01.01_79u.uda.fpsx
APE : RM601_APE_ONLY_ENO_11w32_v0.064.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00001040
EM1 ID:        00001030
PUBLIC ID:     10700003E1DD03442279BA2BC05685F65169FB36
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 12.14.0 
Processing RAWLOADER...
FLIC : 00680020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 12.14.0 
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:02 
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : C436DE8B3DEA6D6C6CCE9CBE15F7C501BB822D02
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 358627048165557
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : c:\InfinityBox\BEST\Backup\Cert\358627048165557_CRT_2nd.rpl

   ===Flashing [MCU]===
Erase : Processing RM-718_111.030.0609_79u_prd.core.fpsx
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:06 
Write : Processing RM-718_111.030.0609_79u_prd.core.fpsx
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [SOS+PMML]
CMT: Writing Hash CERT [SOS+DECOMP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [SOS+IVE3A]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 504 blocks
TIME : Write time : 00:00:18 
MCU Write done
ADL: Request programm status
NAND status : 00000006 / 00000006 / 00000000

   ===Flashing [PPM]===
Erase : Processing RM-718_111.030.0609_04.01_Russian_79u_prd.rofs2.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00 
Write : Processing RM-718_111.030.0609_04.01_Russian_79u_prd.rofs2.fpsx
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 213 blocks
TIME : Write time : 00:00:07 
PPM Write done
ADL: Request programm status
NAND status : 00000006 / 00000006 / 00000000

   ===Flashing [PPM2]===
Erase : Processing RM-718_111.030.0609_C00.01_79u_prd.rofs3.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00 
Write : Processing RM-718_111.030.0609_C00.01_79u_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
CMT: Writing Hash CERT [SOS+IVE3B]
Total writen 4 blocks
TIME : Write time : 00:00:00 
PPM Write done
ADL: Request programm status
NAND status : 00000006 / 00000006 / 00000000

   ===Flashing [CNT]===
Erase : Processing RM-718_111.030.0609_U01.01_79u.uda.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:06 
Write : Processing RM-718_111.030.0609_U01.01_79u.uda.fpsx
Total writen 563 blocks
TIME : Write time : 00:00:21 
CNT Write done
ADL: Request programm status
NAND status : 00000006 / 00000006 / 00000000

   ===Flashing [APE]===
Erase : Processing RM601_APE_ONLY_ENO_11w32_v0.064.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00 
Write : Processing RM601_APE_ONLY_ENO_11w32_v0.064.fpsx
CMT: Writing Hash CERT [SOS*ENO]
Total writen 21 blocks
TIME : Write time : 00:00:00 
APE Write done
ADL: Request programm status
NAND status : 00000006 / 00000006 / 00000000

ADL: Close_Session
Content: 000300000000060000000600000000
ADL: Reboot

Flashing done!
Total flash time : 00:01:03
Reboot phone now...

Reading Phone Info....
Connected phone -   Nokia C6-01
Software Info:     V 79_sr1_11w42.5 25-11-11 RM-601 (c) Nokia
IMEI:  358627048165557
Ape Version: 111.030.0609
Product code:  059C3X9
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
ProductTuneSet...OK!
SwUpgradeSet...OK!
Product code update...
Set phone to Normal mode...

AfterFlash operations done ;D
Done!

Elapsed: 00:01:27
Connect phone on selected interface...

User ACCEPTED FULL ERASE
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00001040
EM1 ID:        00001030
PUBLIC ID:     10700003E1DD03442279BA2BC05685F65169FB36
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 12.14.0 
Processing RAWLOADER...
FLIC : 00680020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 12.14.0 
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:02 

- > Backup check skipped by user

Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : C436DE8B3DEA6D6C6CCE9CBE15F7C501BB822D02

Reading NPC certificate...
IMEI : 358627048165557
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : c:\InfinityBox\BEST\Backup\Cert\358627048165557_CRT_2nd.rpl


ADL: Preparing for erase...

Full Erase started...
Asic : CMT , Sub : NAND
Erase Area 0x00000000-0x3FFFFFFF
Erasing Ok , [0F]
Erase done , time : 00:00:13 

ADL: Erase done

ADL: Close_Session
Content: 000205000000000000FFFF00000000
ADL: Reboot
Phone disconected!

Connect phone on selected interface...

Core : v1.47 , FlashEngine : v1.5

Selected FlashSettings : FullFlash
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : RM-718_111.030.0609_79u_prd.core.fpsx
PPM : RM-718_111.030.0609_04.01_Russian_79u_prd.rofs2.fpsx
PPM2 : RM-718_111.030.0609_C00.01_79u_prd.rofs3.fpsx
CNT : RM-718_111.030.0609_U01.01_79u.uda.fpsx
APE : RM601_APE_ONLY_ENO_11w32_v0.064.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00001040
EM1 ID:        00001030
PUBLIC ID:     10700003E1DD03442279BA2BC05685F65169FB36
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 12.14.0 
Processing RAWLOADER...
FLIC : 00680020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 12.14.0 
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:02 
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : blank (Erased or HW failure)
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
 - > No any CRT data (MCU damaged/CERT erased), skip saving

   ===Flashing [MCU]===
Erase : Processing RM-718_111.030.0609_79u_prd.core.fpsx
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:04 
Write : Processing RM-718_111.030.0609_79u_prd.core.fpsx
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [SOS+PMML]
CMT: Writing Hash CERT [SOS+DECOMP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [SOS+IVE3A]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 504 blocks
TIME : Write time : 00:00:18 
MCU Write done
ADL: Request programm status
NAND status : 00000006 / 00000006 / 00000000

   ===Flashing [PPM]===
Erase : Processing RM-718_111.030.0609_04.01_Russian_79u_prd.rofs2.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00 
Write : Processing RM-718_111.030.0609_04.01_Russian_79u_prd.rofs2.fpsx
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 213 blocks
TIME : Write time : 00:00:07 
PPM Write done
ADL: Request programm status
NAND status : 00000006 / 00000006 / 00000000

   ===Flashing [PPM2]===
Erase : Processing RM-718_111.030.0609_C00.01_79u_prd.rofs3.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00 
Write : Processing RM-718_111.030.0609_C00.01_79u_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
CMT: Writing Hash CERT [SOS+IVE3B]
Total writen 4 blocks
TIME : Write time : 00:00:00 
PPM Write done
ADL: Request programm status
NAND status : 00000006 / 00000006 / 00000000

   ===Flashing [CNT]===
Erase : Processing RM-718_111.030.0609_U01.01_79u.uda.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:04 
Write : Processing RM-718_111.030.0609_U01.01_79u.uda.fpsx
Total writen 563 blocks
TIME : Write time : 00:00:21 
CNT Write done
ADL: Request programm status
NAND status : 00000006 / 00000006 / 00000000

   ===Flashing [APE]===
Erase : Processing RM601_APE_ONLY_ENO_11w32_v0.064.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00 
Write : Processing RM601_APE_ONLY_ENO_11w32_v0.064.fpsx
CMT: Writing Hash CERT [SOS*ENO]
Total writen 21 blocks
TIME : Write time : 00:00:00 
APE Write done
ADL: Request programm status
NAND status : 00000006 / 00000006 / 00000000

ADL: Close_Session
Content: 000300000000060000000600000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:57
Reboot phone now...

Reading Phone Info....
Connected phone -   Nokia C6-01
Software Info:     V 79_sr1_11w42.5 25-11-11 RM-601 (c) Nokia
IMEI:  12345610654321?
Ape Version: 111.030.0609
Product code:  
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
ProductTuneSet...OK!
SwUpgradeSet...OK!
Product code update...
Set phone to Normal mode...

AfterFlash operations done ;D
Done!

Elapsed: 00:01:21
Connect phone on selected interface...

User ACCEPTED FULL ERASE
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00001040
EM1 ID:        00001030
PUBLIC ID:     10700003E1DD03442279BA2BC05685F65169FB36
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 12.14.0 
Processing RAWLOADER...
FLIC : 00680020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 12.14.0 
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:02 

- > Backup check skipped by user

Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : C436DE8B3DEA6D6C6CCE9CBE15F7C501BB822D02

Reading NPC certificate...
IMEI : 000000000000000
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
Cert Read done!


ADL: Preparing for erase...

Full Erase started...
Asic : CMT , Sub : NAND
Erase Area 0x00000000-0x3FFFFFFF
Erasing Ok , [0F]
Erase done , time : 00:00:13 

ADL: Erase done

ADL: Close_Session
Content: 000205000000000000FFFF00000000
ADL: Reboot
Phone disconected!

Connect phone on selected interface...

Core : v1.47 , FlashEngine : v1.5

Selected FlashSettings : FullFlash
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : RM-718_022.014_79.92_prd.core.fpsx
PPM : RM-718_022.014_04.01_Russian_79.92_prd.rofs2.fpsx
PPM2 : RM-718_022.014_00.01_79.92_prd.rofs3.fpsx
CNT : RM-718_022.014_01.01_79.92.uda.fpsx
APE : RM601_APE_ONLY_ENO_11wk15_PS2_v0.063.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00001040
EM1 ID:        00001030
PUBLIC ID:     10700003E1DD03442279BA2BC05685F65169FB36
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 12.14.0 
Processing RAWLOADER...
FLIC : 00680020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 12.14.0 
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:02 
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : blank (Erased or HW failure)
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
 - > No any CRT data (MCU damaged/CERT erased), skip saving

   ===Flashing [MCU]===
Erase : Processing RM-718_022.014_79.92_prd.core.fpsx
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:04 
Write : Processing RM-718_022.014_79.92_prd.core.fpsx
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [SOS+PMML]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 457 blocks
TIME : Write time : 00:00:16 
MCU Write done
ADL: Request programm status
NAND status : 00000006 / 00000006 / 00000000

   ===Flashing [PPM]===
Erase : Processing RM-718_022.014_04.01_Russian_79.92_prd.rofs2.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00 
Write : Processing RM-718_022.014_04.01_Russian_79.92_prd.rofs2.fpsx
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 193 blocks
TIME : Write time : 00:00:07 
PPM Write done
ADL: Request programm status
NAND status : 00000006 / 00000006 / 00000000

   ===Flashing [PPM2]===
Erase : Processing RM-718_022.014_00.01_79.92_prd.rofs3.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00 
Write : Processing RM-718_022.014_00.01_79.92_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
Total writen 2 blocks
TIME : Write time : 00:00:00 
PPM Write done
ADL: Request programm status
NAND status : 00000006 / 00000006 / 00000000

   ===Flashing [CNT]===
Erase : Processing RM-718_022.014_01.01_79.92.uda.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:04 
Write : Processing RM-718_022.014_01.01_79.92.uda.fpsx
Total writen 529 blocks
TIME : Write time : 00:00:20 
CNT Write done
ADL: Request programm status
NAND status : 00000006 / 00000006 / 00000000

   ===Flashing [APE]===
Erase : Processing RM601_APE_ONLY_ENO_11wk15_PS2_v0.063.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00 
Write : Processing RM601_APE_ONLY_ENO_11wk15_PS2_v0.063.fpsx
CMT: Writing Hash CERT [SOS*ENO]
Total writen 20 blocks
TIME : Write time : 00:00:00 
APE Write done
ADL: Request programm status
NAND status : 00000006 / 00000006 / 00000000

ADL: Close_Session
Content: 000300000000060000000600000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:54
Reboot phone now...

Reading Phone Info....
Connected phone -   Nokia C6-01
Software Info:     V 92_11w25.1 01-07-11 RM-601 (c) Nokia
IMEI:  12345610654321?
Ape Version: 022.014
Product code:  
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
ProductTuneSet...OK!
SwUpgradeSet...OK!
Product code update...
Set phone to Normal mode...

AfterFlash operations done ;D
Done!

Elapsed: 00:01:15
Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info...  - Ok

Reading Phone Info....
Connected phone -    Nokia C6-01
Software ver : V 92_11w25.1 01-07-11 RM-601 (c) Nokia
IMEI    :      12345610654321?
Ape Ver :      022.014
APE Var :      022.014022.014.04.01022.014.00.01
APE ADSP:      256
DSP Ver :      92_11w25
APE Test:      0.063
PPM     :      
CNT     :      
Product SN   :     0
Product code :     
Long Prod.SN :     0
Hardware info=======
HWID  : 
Retu  : 40
Tahvo : 00
Batery: 4171 mV
APE BT: HCI Version 20 (rev. 64). LMP Version 44 (rev. 64). Manufacturer 2016.
APE HW: 256
Lock info ===========
IMEI       : 12345610654321?
IMEI spNet : 1A 32 54 16 60 45 23 01 
IMEI svNet : 13 32 54 16 60 45 23 11 F8 

Unable to read Lock table... :(

IMEI DAMAGED!!! CRT308 save skipped... :(

SDD key status : Damaged!!!!!
SimLock status : Ok
Security status : Ok
PA_SL phone

User code : Crypted
UserDataExLevel : Low [Gallery] , FullFlash method 

Done!

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
-> Skip Flash keys Part, for Flash Part use Dead Mode or Fbus

Done!

Connect phone on selected interface...

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00001040
EM1 ID:        00001030
PUBLIC ID:     10700003E1DD03442279BA2BC05685F65169FB36
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 12.14.0 
Processing RAWLOADER...
FLIC : 00680020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 12.14.0 
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:03 
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : C436DE8B3DEA6D6C6CCE9CBE15F7C501BB822D02
ADL: Preparing for write certificates...

Erase NPC... Ok
Writing NPC... Ok
Erase CCC... Ok
Writing CCC... Ok
Erase HWC... Ok
Writing HWC... Ok

ADL: Writing Flash certs done! :)

ADL: Close_Session
Content: 000300000000060000000600000000
ADL: Reboot

-> No any Flex keys selected, skip flex part

Done!

Phone disconected!

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info...  - Ok

Will Write RPL keys now...
Check RPL file...
SimLock Data found!
SimLock key found!
-> Skip Flash keys Part, for Flash Part use Dead Mode or Fbus

Writing SimLock Key...   Ok!
Writing SimLock Data...  Ok!

SDD Key status : SDData Damaged!!!!! :(
SimLock status : SimLock is Ok
Security status : Security is Ok


Done!

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info...  - Ok

Repair SD procedure started...

Phone Imei: 358627048165557
Key file exists, no need to read...
Operating mode is OK, no need change...
Writing Super Dongle Key...   Ok!
Done!

Local SX4 procedure started...

Check SD : Key is Ok
Phone Imei: 358627048165557
Key file exists, no need to read...
Step 1...
Step 2...
SX4 Auth fail...
 - > "Custom Keys" enabled, try again now
 - > If SDD original - "Use Server Sx4"


Local SX4 procedure started...

Check SD : Key is Ok
Phone Imei: 358627048165557
Use custom key...
Step 1...
Step 2...
Step 3...
SX4 Auth - Ok
Upload PM checked
Uploading RF/Battery tune to phone...
RM-601.pm not exist
Select file, please
Using : RM-718.pm
Operating mode is OK, no need change...


Check ST_SECURITY now...
Security status : ST_SECURITY => OK

Done!

Elapsed: 00:00:05

Upload done

Reading Phone Info....
Connected phone -    Nokia C6-01
Software ver : V 92_11w25.1 01-07-11 RM-601 (c) Nokia
IMEI    :      358627048165557
Ape Ver :      022.014
APE Var :      022.014022.014.04.01022.014.00.01
APE ADSP:      256
DSP Ver :      92_11w25
APE Test:      0.063
PPM     :      
CNT     :      
Product SN   :     0
Product code :     059C3X9
Long Prod.SN :     0
Hardware info=======
HWID  : 
Retu  : 40
Tahvo : 00
Batery: 4011 mV
APE BT: HCI Version 4 (rev. 0). LMP Version 4 (rev. 7455). Manufacturer 13.
APE HW: 256
Lock info ===========
IMEI       : 358627048165557
IMEI spNet : 3A 85 26 07 84 61 55 05 
IMEI svNet : 33 85 26 07 84 61 55 15 F8 

Conf key     : 0000000000000000
Provider key : 2440700000000000
Provider    : AT&T;U.S.A. (3650)
Counters   : Key 0  [3] , Fbus 0  [10]
Blocks      : 7

LOCK STATUS :
=============================
BLK : 1
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS :  All Open
=============================
CRT308 Backup Created

SDD key status : Ok
SimLock status : Ok
Security status : Ok
PA_SL3 phone ,  SP_CODE_LEN : 15

User code : Crypted
UserDataExLevel : Low [Gallery] , FullFlash method 

Done!

Warranty IMEI restore Ok

Writing product data...
ProductCode change to 059C3X9 Ok
Setting Warranty IMEI to 358627048165557 Ok
Write done

Reading Phone Info....
Connected phone -    Nokia C6-01
Software ver : V 92_11w25.1 01-07-11 RM-601 (c) Nokia
IMEI    :      358627048165557
Ape Ver :      022.014
APE Var :      022.014022.014.04.01022.014.00.01
APE ADSP:      256
DSP Ver :      92_11w25
APE Test:      0.063
PPM     :      
CNT     :      
Product SN   :     0
Product code :     059C3X9
Long Prod.SN :     0
Hardware info=======
HWID  : 
Retu  : 40
Tahvo : 00
Batery: 4004 mV
APE BT: HCI Version 4 (rev. 0). LMP Version 4 (rev. 7455). Manufacturer 13.
APE HW: 256
Lock info ===========
IMEI       : 358627048165557
IMEI spNet : 3A 85 26 07 84 61 55 05 
IMEI svNet : 33 85 26 07 84 61 55 15 F8 

Conf key     : 0000000000000000
Provider key : 2440700000000000
Provider    : AT&T;U.S.A. (3650)
Counters   : Key 0  [3] , Fbus 0  [10]
Blocks      : 7

LOCK STATUS :
=============================
BLK : 1
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS :  All Open
=============================
CRT308 Backup Created

SDD key status : Ok
SimLock status : Ok
Security status : Ok
PA_SL3 phone ,  SP_CODE_LEN : 15

User code : Crypted
UserDataExLevel : Low [Gallery] , FullFlash method 

Done!

Will Write CCC/HWC keys now...

RM-601.rpl not exist
Select file, please
 - > No any file selected, break operation

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info...  - Ok

Checking StartUp data ...
-----------------------
SDD Key status : SDData is Ok
SimLock status : SimLock is Ok
Security status : Security is Ok
-----------------------

PA_SimLock Version : 
PA_SL3 phone ,  SP_CODE_LEN : 15

Done!

Reading Phone Info....
Connected phone -    Nokia C6-01
Software ver : V 92_11w25.1 01-07-11 RM-601 (c) Nokia
IMEI    :      358627048165557
Ape Ver :      022.014
APE Var :      022.014022.014.04.01022.014.00.01
APE ADSP:      256
DSP Ver :      92_11w25
APE Test:      0.063
PPM     :      
CNT     :      
Product SN   :     0
Product code :     059C3X9
Long Prod.SN :     0
Hardware info=======
HWID  : 
Retu  : 40
Tahvo : 00
Batery: 4009 mV
APE BT: HCI Version 4 (rev. 0). LMP Version 4 (rev. 7455). Manufacturer 13.
APE HW: 256
Lock info ===========
IMEI       : 358627048165557
IMEI spNet : 3A 85 26 07 84 61 55 05 
IMEI svNet : 33 85 26 07 84 61 55 15 F8 

Conf key     : 0000000000000000
Provider key : 2440700000000000
Provider    : AT&T;U.S.A. (3650)
Counters   : Key 0  [3] , Fbus 0  [10]
Blocks      : 7

LOCK STATUS :
=============================
BLK : 1
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS :  All Open
=============================
CRT308 Backup Created

SDD key status : Ok
SimLock status : Ok
Security status : Ok
PA_SL3 phone ,  SP_CODE_LEN : 15

User code : Crypted
UserDataExLevel : Low [Gallery] , FullFlash method 

Done!