COM3 [VCP0] selected
module v3.24
Device: Autodetect 6228-6239 NAND
Checking data, wait...
Action: write flash NAND
write: Firmware
TINNO35_09A_PCB01_GPRS_MT6235B_S01.E560_PR1_TURKEY _01_07__firmware_20101013-103330.B4M.bin
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
nfi area detection...
converting data...
done 0x01F07E00 bytes
bootloader version: TINNO35_09A_BOOTLOADER_V005_MT6235B_E560_PR1_TURKE Y_01_07.bin
nfi area detection (3 cores) finished: Ok
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8A04:8A01
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0018]: 00AD:007900A50000 [HYNIX] HY27XA081G1M
chip size: 128Mb
page/spare size: 0200/0010
pages per block: 0020
bits i/o: 08
address cycles: 04
internal RAM size: 00010000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (921600)...
done
ram test...
testing...
ram test passed
===> detect existing firmware structure...
detect ffs...
ffs offset/size: 02000000/06000000
firmware size: 32Mb
ffs size: 96Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: E560_PR1_Turkey_01.07
detect NAND info...
number of areas/bytes to read: 1:00034000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
bootloader version: TINNO35_09A_BOOTLOADER_V005_MT6235B_E560_PR1_TURKE Y_01_07.bin
nfi area detection (3 cores) finished: Ok
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
number of areas/bytes to read: 1:00004000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
number of areas/bytes to read: 1:00004000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
error: unexpected answer:
startup code area #1 is invalid
startup code area #1 detection done
rom info ver: 07
sw version: TINNO35_09A_PCB01_GPRS_MT6235B_S01.E560_PR1_TURKEY _01_07.BIN
project-id: E560_PR1_Turkey_01.07, A288EBA3
code offset: 00000000
ffs offset/size [01]: 02000000/06000000
rom info structure: [protected] type (07), 1 record(s)
TCL-ID is absent
===> done
nfi area detection...
converting data...
done 0x01F07E00 bytes
bootloader version: TINNO35_09A_BOOTLOADER_V005_MT6235B_E560_PR1_TURKE Y_01_07.bin
nfi area detection (3 cores) finished: Ok
startup code area #1 check...
rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\id.00006235.[TINNO35_09A_PCB01_GPRS_MT6235B_S01.E560_PR1_TURKEY _01_07.BIN_A3EB88A2].rpl
rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\id.00006235._TINN O35_09A_PCB01_GPRS_MT6235B_S01.E560_PR1_TURKEY_01_ 07.BIN_A3EB88A2_.rpl
rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.00006235.[TINNO35_09A_PCB01_GPRS_MT6235B_S01.E560_PR1_TURKEY _01_07.BIN_A3EB88A2].rpl
rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.00006235._TINNO35_09A_PCB01_GPRS_MT6235B_S01.E56 0_PR1_TURKEY_01_07.BIN_A3EB88A2_.rpl
====================
warning: unknown firmware: TINNO35_09A_PCB01_GPRS_MT6235B_S01.E560_PR1_TURKEY _01_07.BIN_A3EB88A2
Unknown firmware found (v.3.24, database date: 01.10.2010), user action required:
1. download latest software from support area and try again
2. if no still luck follow the next procedure:
- find good working phone with the same firmware:
TINNO35_09A_PCB01_GPRS_MT6235B_S01.E560_PR1_TURKEY _01_07.BIN
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to RapidShare AG, Cham, Switzerland or 4shared.com - free file sharing and storage
- include in your e-mail full text from phone back label (phone name etc.)
- be little bit patient and wait update
====================
error: startup code area #1 can't be fixed
You can flash phone now but can not finalize it,
in most cases phone CAN NOT power-on.
Do you want to continue anyway ?
number of cores: 3
loading files...
number of areas: 3
done
write...
write bootloader...
.
.
write core...
Disconnect...
done
Finished, time used: 7 min 57 sec
Remove/Install battery now !