18:39:34 : ======================================================
18:39:34 : Flash File Checksum Verification
18:39:34 : ======================================================
18:39:34 : RM803_12w12_1_prod_generic_nokia_osbl.esco: CHECKSUM PASSED
18:39:34 : RM803_12w12_1_prod_generic_amss.esco: CHECKSUM PASSED
18:39:35 : RM803_12w12_1_prod_generic_adsp.esco: CHECKSUM PASSED
18:39:42 : RM803_12121_prod_231_04_boot.esco: CHECKSUM PASSED
18:39:42 : RM803_12w12_1_prod_generic_user_area_erase.esco: CHECKSUM PASSED
18:39:42 : ======================================================
18:39:42 : Verification Done...
18:39:44 : Windows Phone Flashing Started
18:39:44 :
18:39:44 : OSBL File Found:
18:39:44 : RM803_12w12_1_prod_generic_nokia_osbl.esco
18:39:44 : AMSS File Found:
18:39:44 : RM803_12w12_1_prod_generic_amss.esco
18:39:44 : ADSP File Found:
18:39:44 : RM803_12w12_1_prod_generic_adsp.esco
18:39:48 : WPOS File Found:
18:39:48 : RM803_12121_prod_231_04_boot.esco
18:39:48 : USER AREA ERASE File Found:
18:39:48 : RM803_12w12_1_prod_generic_user_area_erase.esco
18:39:48 :
18:39:48 : ======================================================
18:39:48 : Windows Phone Lumia Flasher
18:39:48 : ======================================================
18:39:48 :
18:39:48 : If the Phone is ALIVE
18:39:48 : 1. Power On the Phone and Connect it to the USB Port
18:39:48 :
18:39:48 : If the Phone is DEAD
18:39:48 : 1. Press and Hold the VOLUME UP button
18:39:48 : 2. Connect it to the USB Port while still Pressing
18:39:48 : the VOLUME UP button
18:39:48 : 3. Continue to Press the VOLUME UP button for 8 more
18:39:48 : seconds
18:39:48 : ======================================================
18:39:48 :
18:40:39 :
18:40:39 : ======================================================
18:40:39 : ERROR: Active Phone Handle was NOT DETECTED
18:40:39 : ======================================================

18:35:00 : ======================================================
18:35:00 : ======================================================
18:35:00 : Lumia Test Point Connection Module
18:35:00 : ======================================================
18:35:00 : ======================================================
18:35:00 :
18:35:00 : 1. DO NOT USE THE PHONE"S BATTERY
18:35:00 : 2. Connect the Soldered TP Connections to ATF Box
18:35:00 : 3. Disconnect the USB Cable and Wait until the
18:35:00 : the ATF Software will tell you to Connect the USB.
18:35:00 :
18:35:07 :
18:35:07 : Interface Reset OK!
18:35:07 : Reading Platform Information...
18:35:07 : Selecting Active Handle...
18:35:07 : Select Handle OK!
18:35:07 : Sending Ping...
18:35:07 : Ping Reply OK!
18:35:07 :
18:35:07 : Lumia 710 Detected
18:35:07 :
18:35:07 : Storage Device Information
18:35:07 : Manufacturer ID: 90
18:35:07 : Application ID : 014A
18:35:07 : Product Name : HYNIX
18:35:07 : Product Rev : 5D
18:35:07 : Product SN : 067F313C
18:35:07 :
18:35:07 : Protection Information
18:35:07 : Write Protect A: OFF
18:35:07 : Write Protect B: OFF
18:35:07 :
18:35:07 : Writing MBR...
18:35:08 : Write Success!
18:35:08 : Writing SEC_BOOT...
18:35:44 : Write Success!
18:35:44 : Writing OSBL...
18:37:35 : Write Success!
18:37:35 :
18:37:35 : BOOT Images Written Successfully!
18:37:35 :
18:37:35 : Total Elapsed Time 00:02:34

--- Press and hold 'Volume Up' button and insert cable! ---
Connection opened successfully
Establish connection with device...
Kick ...
OSBL alive
Init Ok
OSBL info
Prt : 1.0
Ver : 1.0.0.4
Bld : 10
Tms : 29.09.2011 / 13:38:56

==== OSBL ====
Processing : RM803_12w46_prod_generic_nokia_osbl.esco
nokia_osbl.mbn.cert , Hash : C72DBA3ABED42215584093FA9DE247381D6062B4
nokia_osbl.mbn , len : 0x000EA228 , Type : Data
Will flash 1 regions
OSBL flashing done

==== AMSS ====
Processing : RM803_12w46_prod_generic_amss.esco
amss.mbn.cert , Hash : C72DBA3ABED42215584093FA9DE247381D6062B4
amss.mbn.enc , len : 0x00FDD690 , Type : Data
Will flash 1 regions
AMSS flashing done

==== ADSP ====
Processing : RM803_12w46_prod_generic_adsp.esco
adsp.mbn.cert , Hash : C72DBA3ABED42215584093FA9DE247381D6062B4
adsp.mbn.enc , len : 0x005562D0 , Type : Data
Will flash 1 regions
ADSP flashing done

==== WINDOWS PHONE ====
Processing : RM803_12460_prod_231_05_boot.esco
boot.img.cert , Hash : C72DBA3ABED42215584093FA9DE247381D6062B4
boot.img , len : 0x147AD600 , Type : Data
Will flash 22 regions
Windows Phone flashing done

==== USER DEFINED AREA ====
Processing : RM803_12w46_prod_generic_user_area_erase.esco
user_area_erase.cert , Hash : C72DBA3ABED42215584093FA9DE247381D6062B4
UDA file detected, will erase defined region
Using Normal Erase method
UDA erase done
UDA flashing done

Flashing done!
Flashing time : 00:03:11
Reboot device Ok

Phone disconected!

Connect phone on selected interface...