Re: Тестирование Новых возможностей BEST'a -II
#61
Удачно прошит 1280 RM-647, ТА до прошивки не включался.
Прошивал последней бета версией BESTv1.13
Код:
Selected FlashSettings : Manual
Files Set for Flashing :
MCU : rm647_005.800
PPM : rm647_005.80er
CNT : rm6470_nai05.80er
Infineon flashing...
Booting phone now....
Sync Ok , A2
CPU ID : XGOLD , A200341100
Boot Ok , 01
PBL : SE0_091125 F11
Algo Ok , 01
SBL mode Ok
SBL : Default_RAM_Bootloader
EPP CFG [Bering]...
FLASH ID : 00EC000000542200
Boot Done!
File : rm647_005.800
Image : hw_b2_rm647_r05.800.fls
Cert block found, sending....
Cert sent
Found 3 region(s)
Processing Region 1/3
Erase , Start : 0x00800000 , Len : 0x00210000
Erasing, wait ...
Erase done
Write , Start : 0x00800000 , Len : 0x00210000
Flashing , wait ...
Region flash done
Processing Region 2/3
Erase , Start : 0x00C60000 , Len : 0x001EC2C0
Erasing, wait ...
Erase done
Write , Start : 0x00C60000 , Len : 0x001EC2C0
Flashing , wait ...
Region flash done
Processing Region 3/3
Erase , Start : 0x00FFC000 , Len : 0x00000040
Erasing, wait ...
Erase done
Write , Start : 0x00FFC000 , Len : 0x00000040
Flashing , wait ...
Region flash done
Check : 6458
File : rm647_005.80er
Image : hw_b2_rm647_005.80er.fls
Cert block found, sending....
Cert sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x00210000 , Len : 0x00178D00
Erasing, wait ...
Erase done
Write , Start : 0x00210000 , Len : 0x00178D00
Flashing , wait ...
Region flash done
Check : D2EB
File : rm6470_nai05.80er
Image : hw_b2_rm6470_nai05.80er.fls
Cert block found, sending....
Cert sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x00EB0000 , Len : 0x00055A00
Erasing, wait ...
Erase done
Write , Start : 0x00EB0000 , Len : 0x00055A00
Flashing , wait ...
Region flash done
Check : 5F15
Flashing done, rebooting...
Done!
Connect phone on selected interface...
Phone disconected!
Connect phone on selected interface...
Phone found!
Series 40 Device detected!
read info... - Ok
Resetting User Code to default (12345)...
Code reset done, now it 12345 :)
Done
Resetting selected items...
Check phone mode...
Phone in Local mode
Seting Test mode... wait...
Test mode set
Settings Full Factory Defaults...
Set OK!
Settings Software Upgrade Defaults...
Set OK!
Settings Service Centre Defaults...
Set OK!
Settings Production Tune Defaults...
Set OK!
Settings User Data Defaults...
Set OK!
Settings Leave Factory defaults...
Set OK!
Elapsed: 00:00:10