Re: E5-00 только вибро...
#20
Вот отлично получилось,сперва Full Erase,после залил Stress Test и файл Eno,вот лог заливки Eno выложенный уважаемым товарищем
KonstantinVoskr:
Код:
Core : v1.98 , BB5XG FlashEngine : v9.9
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...
Files Set for Flashing :
APE : RM632_ENO_APE_ONLY.fpsx
Flashing phone now...
[Gen] Rules accepted for : RAPUxx Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000C35
EM1 ID: 00000C30
PUBLIC ID: 02C0011870DE0344928010C97F5A0F6FADCD92AA
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00500020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : blank (Erased or HW failure)
ADL: phone is in flash mode
Backup enabled, will read all certificates...
Reading NPC certificate...
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
- > No any CRT data (MCU damaged/CERT erased), skip saving
=== SW Version Check ===
- > Can not collect initial info, continue flashing...
- > Hope, this version will be ok
=== SW Version Check ===
===Flashing [APE]===
Erase : Processing RM632_ENO_APE_ONLY.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM632_ENO_APE_ONLY.fpsx
CMT: Writing Hash CERT [SOS*ENO]
Total writen 17 blocks
TIME : Write time : 00:00:00
APE Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000
ADL: Close_Session
Content: 000300000000020000000200000000
ADL: Reboot
Flashing done!
Total flash time : 00:00:00
Reboot phone now...
- > AfterFlash Failed! :( Reason : Downgrade try or HW Error
Anyway - try reinsert battery and PowerUp phone manualy
Connect phone on selected interface...
Done!
После прошивка:
Код:
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : rm632_081.004_prd.core.fpsx
PPM : rm632_081.004_20.01_Russian_QW1_prd.rofs2.fpsx
PPM2 : rm632_081.004_C00.01_DEFAULT_prd.rofs3.fpsx
CNT : rm632_081.004_U003.000_prd.uda.fpsx
Flashing phone now...
[Gen] Rules accepted for : RAPUxx Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000C35
EM1 ID: 00000C30
PUBLIC ID: 02C0011870DE0344928010C97F5A0F6FADCD92AA
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00500020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:01
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : blank (Erased or HW failure)
ADL: phone is in flash mode
Backup enabled, will read all certificates...
Reading NPC certificate...
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
- > No any CRT data (MCU damaged/CERT erased), skip saving
=== SW Version Check ===
- > Can not collect initial info, continue flashing...
- > Hope, this version will be ok
=== SW Version Check ===
===Flashing [MCU]===
Erase : Processing rm632_081.004_prd.core.fpsx
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:02
Write : Processing rm632_081.004_prd.core.fpsx
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [SOS+PMML]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 436 blocks
TIME : Write time : 00:00:14
MCU Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000
===Flashing [PPM]===
Erase : Processing rm632_081.004_20.01_Russian_QW1_prd.rofs2.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm632_081.004_20.01_Russian_QW1_prd.rofs2.fpsx
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 222 blocks
TIME : Write time : 00:00:07
PPM Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000
===Flashing [PPM2]===
Erase : Processing rm632_081.004_C00.01_DEFAULT_prd.rofs3.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm632_081.004_C00.01_DEFAULT_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
Total writen 35 blocks
TIME : Write time : 00:00:01
PPM Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000
===Flashing [CNT]===
Erase : Processing rm632_081.004_U003.000_prd.uda.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:02
Write : Processing rm632_081.004_U003.000_prd.uda.fpsx
Total writen 97 blocks
TIME : Write time : 00:00:05
CNT Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000
ADL: Close_Session
Content: 000300000000020000000200000000
ADL: Reboot
Flashing done!
Total flash time : 00:00:35
Reboot phone now...
Reading Phone Info....
Connected phone - Nokia E5-00
Software Info: V ICPR82_11w16.3.4 17-08-11 RM-632 (c) Nokia
IMEI: 12345610654321?
Ape Version: 081.004
Product code:
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Battery voltage is enough for start
AfterFlash operations done ;D
Done!
Elapsed: 00:01:50
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Checking StartUp data ...
-----------------------
IMEI Validation : IMEI Damaged!!!!
- > SIMLOCK , SECURITY Info can be wrong!
- > Need restore NPC backup or RPL
SDD Key status : SDData Damaged!!!!! :(
- > Do REPAIR SDD , Local SX4 if needed
CMLA Key status : CMLA key Not exist
SimLock status : SimLock is Ok
Security status : Security is Ok
-----------------------
PA_SimLock Version :
PA_SL phone detected
Done!
И наконец-то телефон загрузился в TestMode,начались анцы с бубном по восстановлению основного ПО:
Код:
Will Write RPL keys now...
Check RPL file...
SIMLOCK Data found!
SIMLOCK KEY found!
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000C35
EM1 ID: 00000C30
PUBLIC ID: 02C0011870DE0344928010C97F5A0F6FADCD92AA
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00500020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : CCD9F80559BA50D9B3E274F9E7120BE1EE4EEA7C
ADL: Preparing for write certificates...
ADL: Writing Flash certs done! :)
ADL: Close_Session
Content: 000300000000020000000200000000
ADL: Reboot
Wait, reconneting...
Writing SimLock Key... Error!
Writing SimLock Data... Error!
SDD Key status : SDData Damaged!!!!! :(
SimLock status : SimLock is Ok
Security status : Security is Ok
Done!
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Phone disconected!
Connect phone on selected interface...
Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000C35
EM1 ID: 00000C30
PUBLIC ID: 02C0011870DE0344928010C97F5A0F6FADCD92AA
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00500020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:01
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : CCD9F80559BA50D9B3E274F9E7120BE1EE4EEA7C
ADL: Preparing for write certificates...
Erase NPC... Ok
Writing NPC... Ok
Erase CCC... Ok
Writing CCC... Ok
Erase HWC... Ok
Writing HWC... Ok
ADL: Writing Flash certs done! :)
ADL: Close_Session
Content: 000300000000020000000200000000
ADL: Reboot
-> No any Flex keys selected, skip flex part
Done!
Phone disconected!
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Checking StartUp data ...
-----------------------
SDD Key status : SDData Damaged!!!!! :(
- > Do REPAIR SDD , Local SX4 if needed
CMLA Key status : CMLA key Not exist
SimLock status : SimLock Damaged!!!!! :(
- > Do REPAIR SL if it SL2/SL phone, if SL3 - Help Only Backup Or RPL
Security status : Security is Ok
-----------------------
PA_SimLock Version :
PA_SL phone detected
Done!
Repair SD procedure started...
Phone Imei: 351663054302617
Key file exists, no need to read...
Operating mode is OK, no need change...
Writing Super Dongle Key... Ok!
Done!
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Checking StartUp data ...
-----------------------
SDD Key status : SDData is Ok
CMLA Key status : CMLA key Not exist
SimLock status : SimLock Damaged!!!!! :(
- > Do REPAIR SL if it SL2/SL phone, if SL3 - Help Only Backup Or RPL
Security status : Security Damaged!!!!! :(
- > Do Local SX4 or Server SX4 , Upload Tune ( checkbox or manual )
-----------------------
PA_SimLock Version :
PA_SL phone detected
Done!
Local SX4 procedure started...
Check SD : Key is Ok
Phone Imei: 351663054302617
Key file exists, no need to read...
Step 1...
Step 2...
SX4 Auth fail...
- > "Custom Keys" enabled, try again now
- > If SDD original - "Use Server Sx4"
Local SX4 procedure started...
Check SD : Key is Ok
Phone Imei: 351663054302617
Key file exists, no need to read...
Step 1...
Step 2...
SX4 Auth fail...
- > "Custom Keys" enabled, try again now
- > If SDD original - "Use Server Sx4"
Will Write CCC/HWC keys now...
RM-632.rpl not exist
Select file, please
Using : 351663054302617_CRT.rpl
CCC Data found!
HWC Data found!
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000C35
EM1 ID: 00000C30
PUBLIC ID: 02C0011870DE0344928010C97F5A0F6FADCD92AA
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00500020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:01
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : CCD9F80559BA50D9B3E274F9E7120BE1EE4EEA7C
ADL: Preparing for write certificates...
Erase CCC... Ok
Writing CCC... Ok
Erase HWC... Ok
Writing HWC... Ok
ADL: Writing Flash certs done! :)
ADL: Close_Session
Content: 000300000000020000000200000000
ADL: Reboot
All done, disconneting...
Done!
Elapsed: 00:00:14
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Checking StartUp data ...
-----------------------
SDD Key status : SDData is Ok
CMLA Key status : CMLA key Not exist
SimLock status : SimLock Damaged!!!!! :(
- > Do REPAIR SL if it SL2/SL phone, if SL3 - Help Only Backup Or RPL
Security status : Security Damaged!!!!! :(
- > Do Local SX4 or Server SX4 , Upload Tune ( checkbox or manual )
-----------------------
PA_SimLock Version :
PA_SL phone detected
Done!
Reading Phone Info....
Connected phone - Nokia E5-00
Software ver : V ICPR82_11w16.3.4 17-08-11 RM-632 (c) Nokia
IMEI : 351663054302617
XappVer : 000007BC
Ape Ver : 081.004
APE Var : 081.004081.004.20.01081.004.C00.01
APE ADSP: 256
DSP Ver : ICPR82_11w16
APE Test: 0.025
PPM :
CNT :
Product SN : 0
Product code :
Long Prod.SN : 0
Hardware info=======
HWID :
Retu : 35
Tahvo : 00
Batery: 3824 mV
APE HW: 256
Lock info ===========
IMEI : 351663054302617
IMEI spNet : 3A 15 66 03 45 03 62 01
IMEI svNet : 33 15 66 03 45 03 62 21 F7
Unable to read Lock table... :(
CRT308 Backup Created
SDD key status : Ok
CMLA Key status : Not Present
SimLock status : Damaged!!!!!
Security status : Damaged!!!!!
PA_SimLock Version :
PA_SL phone detected
User code : Crypted
UserDataExLevel : Low [Gallery] , FullFlash method
Done!
Will Write RPL keys now...
Check RPL file...
SIMLOCK Data found!
SIMLOCK KEY found!
-> Skip Flash keys Part, for Flash Part use Dead Mode!!!!!
Writing SimLock Key... Ok!
Writing SimLock Data... Ok!
SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!! :(
Done!
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Reading Phone Info....
Connected phone - Nokia E5-00
Software ver : V ICPR82_11w16.3.4 17-08-11 RM-632 (c) Nokia
IMEI : 351663054302617
XappVer : 000007BC
Ape Ver : 081.004
APE Var : 081.004081.004.20.01081.004.C00.01
APE ADSP: 256
DSP Ver : ICPR82_11w16
APE Test: 0.025
PPM :
CNT :
Product SN : 0
Product code :
Long Prod.SN : 0
Hardware info=======
HWID :
Retu : 35
Tahvo : 00
Batery: 3824 mV
APE HW: 256
Lock info ===========
IMEI : 351663054302617
IMEI spNet : 3A 15 66 03 45 03 62 01
IMEI svNet : 33 15 66 03 45 03 62 21 F7
Conf key : 0000000000000000
Provider key : 2440700000000000
Country : Finland
Operator : NOKIA (Open)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7
LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
CRT308 Backup Created
SDD key status : Ok
CMLA Key status : Not Present
SimLock status : Ok
Security status : Damaged!!!!!
PA_SimLock Version :
PA_SL3 phone , SP_CODE_LEN : 15
User code : Crypted
UserDataExLevel : Low [Gallery] , FullFlash method
Done!
Local SX4 procedure started...
Check SD : Key is Ok
Phone Imei: 351663054302617
Use custom key...
Step 1...
Step 2...
SX4 Auth fail...
- > "Custom Keys" disabled, try again now
- > If SDD original - "Use Server Sx4"
Local SX4 procedure started...
Check SD : Key is Ok
Phone Imei: 351663054302617
Key file exists, no need to read...
Step 1...
Step 2...
SX4 Auth fail...
- > "Custom Keys" enabled, try again now
- > If SDD original - "Use Server Sx4"
Local SX4 procedure started...
Check SD : Key is Ok
Phone Imei: 351663054302617
Use custom key...
Step 1...
Step 2...
SX4 Auth fail...
- > "Custom Keys" disabled, try again now
- > If SDD original - "Use Server Sx4"
Reading Phone Info....
Connected phone - Nokia E5-00
Software ver : V ICPR82_11w16.3.4 17-08-11 RM-632 (c) Nokia
IMEI : 351663054302617
XappVer : 000007BC
Ape Ver : 081.004
APE Var : 081.004081.004.20.01081.004.C00.01
APE ADSP: 256
DSP Ver : ICPR82_11w16
APE Test: 0.025
PPM :
CNT :
Product SN : 0
Product code :
Long Prod.SN : 0
Hardware info=======
HWID :
Retu : 35
Tahvo : 00
Batery: 3825 mV
APE HW: 256
Lock info ===========
IMEI : 351663054302617
IMEI spNet : 3A 15 66 03 45 03 62 01
IMEI svNet : 33 15 66 03 45 03 62 21 F7
Conf key : 0000000000000000
Provider key : 2440700000000000
Country : Finland
Operator : NOKIA (Open)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7
LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
CRT308 Backup Created
SDD key status : Ok
CMLA Key status : Not Present
SimLock status : Ok
Security status : Damaged!!!!!
PA_SimLock Version :
PA_SL3 phone , SP_CODE_LEN : 15
User code : Crypted
UserDataExLevel : Low [Gallery] , FullFlash method
Done!
Как видите никак не хотел SDD восстанавливаться,вернее я предпринимал ошибочные шаги,потом нажал Full PM,и выбрал PM из RPL файла в итоге логи:
Код:
Operating mode is OK, no need change...
Field 120
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Done!
Elapsed: 00:00:00
Local SX4 procedure started...
Check SD : Key is Ok
Phone Imei: 351663054302617
Key file exists, no need to read...
Step 1...
Step 2...
SX4 Auth fail...
- > "Custom Keys" enabled, try again now
- > If SDD original - "Use Server Sx4"
Local SX4 procedure started...
Check SD : Key is Ok
Phone Imei: 351663054302617
Use custom key...
Step 1...
Step 2...
Step 3...
SX4 Auth - Ok
Upload PM checked
Uploading RF/Battery tune to phone...
Using : RM-632.pm
Operating mode is OK, no need change...
Check ST_SECURITY now...
Security status : ST_SECURITY => OK
Done!
Elapsed: 00:00:01
Upload done
Checking StartUp data ...
-----------------------
SDD Key status : SDData is Ok
CMLA Key status : CMLA key Not exist
SimLock status : SimLock is Ok
Security status : Security is Ok
-----------------------
PA_SimLock Version :
PA_SL3 phone , SP_CODE_LEN : 15
Done!
Phone disconected!
Connect phone on selected interface...
Сейчас телефон нормально функционирует.Гляньте логи товарищи,все нормуль?
Последние файлы
