registered to: Gatin

Connect phone on selected interface...

UFS S/N ------ boot - Ok

Connect phone on selected interface...

Phone found!
Series 40 Device detected! 
read info...  - Ok

Core : v1.60 , BB5XG FlashEngine : v3.9

Selected FlashSettings : Manual
Files Set for Flashing :
MCU : rm647_007.000
PPM : rm647_007.00el
CNT : rm6470_nai07.00el

Infineon flashing...
-> Infineon XG110 : IMEI Backup Created
Booting phone now....
Sync Ok , A2
CPU ID : XGOLD , A200341100
PBL : Dynamic
Boot Ok , 01AB
SBL : Dynamic
Algo Ok , 01
SBL mode Ok
SBL : Default_RAM_Bootloader
EPP CFG [Bering]...
FLASH ID : 0020000000C08800
FLASH ID : ST, M58WR064
Boot Done!

   ===Flashing [MCU]===
File : rm647_007.000
Image : hw_b2_rm647_r07.000.fls
Cert block found, sending....
Cert sent
Found 3 region(s)
Processing Region 1/3
Erase , Start : 0x00800000 , Len : 0x00210000
Erasing, wait ... 
Erase done
Write , Start : 0x00800000 , Len : 0x00210000
Flashing , wait ...
Region flash done
Processing Region 2/3
Erase , Start : 0x00C60000 , Len : 0x00250000
Erasing, wait ... 
Erase done
Write , Start : 0x00C60000 , Len : 0x001FA380
Flashing , wait ...
Error, 590 , data missmatch! [0200410040001C00F601]
Region flash error
- > Error...
- > Check cable, flashfile

Connect phone on selected interface...

Core : v1.60 , BB5XG FlashEngine : v3.9

Selected FlashSettings : Manual
Files Set for Flashing :
MCU : rm647_007.000
PPM : rm647_007.00el
CNT : rm6470_nai07.00el

Infineon flashing...
Booting phone now....
Sync Ok , A2
CPU ID : XGOLD , A200341100
PBL : Dynamic
Boot Ok , 01AB
SBL : Dynamic
Algo Ok , 01
SBL mode Ok
SBL : Default_RAM_Bootloader
EPP CFG [Bering]...
FLASH ID : 0020000000C08800
FLASH ID : ST, M58WR064
Boot Done!

   ===Flashing [MCU]===
File : rm647_007.000
Image : hw_b2_rm647_r07.000.fls
Cert block found, sending....
Cert sent
Found 3 region(s)
Processing Region 1/3
Erase , Start : 0x00800000 , Len : 0x00210000
Erasing, wait ... 
Erase done
Write , Start : 0x00800000 , Len : 0x00210000
Flashing , wait ...
Error, 28 , data missmatch! [0200410040001C00F601]
Region flash error
- > Error...
- > Check cable, flashfile

Connect phone on selected interface...

Core : v1.60 , BB5XG FlashEngine : v3.9

Selected FlashSettings : Manual
Files Set for Flashing :
MCU : rm647_006.510
PPM : rm647_006.51el
CNT : rm6470_nai06.51el

Infineon flashing...
Booting phone now....
Sync Ok , A2
CPU ID : XGOLD , A200341100
PBL : Dynamic
Boot Ok , 01AB
SBL : Dynamic
Algo Ok , 01
SBL mode Ok
SBL : Default_RAM_Bootloader
EPP CFG [Bering]...
FLASH ID : 0020000000C08800
FLASH ID : ST, M58WR064
Boot Done!

   ===Flashing [MCU]===
File : rm647_006.510
Image : hw_b2_rm647_r06.510.fls
Cert block found, sending....
Cert sent
Found 3 region(s)
Processing Region 1/3
Erase , Start : 0x00800000 , Len : 0x00210000
Erasing, wait ... 
Erase done
Write , Start : 0x00800000 , Len : 0x00210000
Flashing , wait ...
Region flash done
Processing Region 2/3
Erase , Start : 0x00C60000 , Len : 0x00250000
Erasing, wait ... 
Erase done
Write , Start : 0x00C60000 , Len : 0x001F9340
Flashing , wait ...
Region flash done
Processing Region 3/3
Erase , Start : 0x00FFC000 , Len : 0x00004000
Erasing, wait ... 
Erase done
Write , Start : 0x00FFC000 , Len : 0x00000040
Flashing , wait ...
Region flash done
Check : 72AB
   ===Flashing [PPM]===
File : rm647_006.51el
Image : hw_b2_rm647_006.51el.fls
Cert block found, sending....
Cert sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x00210000 , Len : 0x00250000
Erasing, wait ... 
Erase done
Write , Start : 0x00210000 , Len : 0x00140340
Flashing , wait ...
Error, 349 , data missmatch! [0200410040001C00F601]
Region flash error
- > Error...
- > Check cable, flashfile

Connect phone on selected interface...

Will Write RPL keys now...
Check RPL file...
No any part for write! check file, Write Settings

Core : v1.60 , BB5XG FlashEngine : v3.9

Selected FlashSettings : Manual
Files Set for Flashing :
MCU : rm647_007.000
PPM : rm647_007.00el
CNT : rm6470_nai07.00el

Infineon flashing...
Booting phone now....
Sync Ok , A2
CPU ID : XGOLD , A200341100
PBL : Dynamic
Boot Ok , 01AB
SBL : Dynamic
Algo Ok , 01
SBL mode Ok
SBL : Default_RAM_Bootloader
EPP CFG [Bering]...
FLASH ID : 0020000000C08800
FLASH ID : ST, M58WR064
Boot Done!

   ===Flashing [MCU]===
File : rm647_007.000
Image : hw_b2_rm647_r07.000.fls
Cert block found, sending....
Cert sent
Found 3 region(s)
Processing Region 1/3
Erase , Start : 0x00800000 , Len : 0x00210000
Erasing, wait ... 
Erase done
Write , Start : 0x00800000 , Len : 0x00210000
Flashing , wait ...
Region flash done
Processing Region 2/3
Erase , Start : 0x00C60000 , Len : 0x00250000
Erasing, wait ... 
Erase done
Write , Start : 0x00C60000 , Len : 0x001FA380
Flashing , wait ...
Region flash done
Processing Region 3/3
Erase , Start : 0x00FFC000 , Len : 0x00004000
Erasing, wait ... 
Erase done
Write , Start : 0x00FFC000 , Len : 0x00000040
Flashing , wait ...
Region flash done
Check : B3E8
   ===Flashing [PPM]===
File : rm647_007.00el
Image : hw_b2_rm647_007.00el.fls
Cert block found, sending....
Cert sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x00210000 , Len : 0x00250000
Erasing, wait ... 
Erase done
Write , Start : 0x00210000 , Len : 0x00140580
Flashing , wait ...
Region flash done
Check : B11E
   ===Flashing [CNT]===
File : rm6470_nai07.00el
Image : hw_b2_rm6470_nai07.00el.fls
Cert block found, sending....
Cert sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x00EB0000 , Len : 0x000D0000
Erasing, wait ... 
Erase done
Write , Start : 0x00EB0000 , Len : 0x00056540
Flashing , wait ...
Region flash done
Check : 9847

Flashing done, rebooting...
-> Infineon info : Do FullFactory Sets after flashing
Flashing Done!


Init Service mode... Wait...

Init service mode failed!
Try powerup phone manually and connect

Connect phone on selected interface...

Connect phone on selected interface...

UFS S/N 38442 boot - Ok

Connect phone on selected interface...

Phone found!
Series 40 Device detected! 
read info...  - Ok

Reading Phone Info....
SW ver  : V 07.00 11-09-12 RM-647 (c) Nokia
IMEI    :      358624040586369
PPM     :      V 07.00
11-09-12
RM-647
(c) Nokia
EL
PCode   :      0592227
BPCode  :      059J889
HWID    :      3003
LCDVer  :      WIN:SERI:90
NT7542
IMEI    :      358624040586369
Sl Conf  : 001-01-00000000000
Sl Prof  : 000000000003000-2
Sl Aux   : 000B0000
Hw Sig   : E9A77C6273080487
Country      : Test SIM (Open)
Operator     : NOKIA (Open)

Lock info:
Block 1
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 2
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 3
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 4
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 5
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 6
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 7
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  

Done!

Resetting selected items...
Operating mode is OK, no need change...
Settings Full Factory Defaults...
Set OK!
Settings Software Upgrade Defaults...
Set OK!

Elapsed: 00:00:01

Reading Phone Info....
SW ver  : V 07.00 11-09-12 RM-647 (c) Nokia
IMEI    :      358624040586369
PPM     :      V 07.00
11-09-12
RM-647
(c) Nokia
EL
CNT     :      V 07.00
11-09-12
RM-647
(c) Nokia
EL
DSP Ver :      Error
PCode   :      0592227
BPCode  :      V 07.00
11-09-12
RM-647
(c) Nokia
EL
HWID    :      059J889
LCDVer  :      0204426
IMEI    :      358624040586369
Sl Conf  : 000-00-000
Sl Prof  : -
Sl Aux   : 
Hw Sig   : 
Country      : Unknown
Operator     : Unknown

Lock info:

Done!

Reading Phone Info....
SW ver  : Error
IMEI    :      Error
PPM     :      358624040586369
DSP Ver :      8624040586369
PCode   :      Error
BPCode  :      059J889
HWID    :      Error
LCDVer  :      Error
IMEI    :      Error
SimLock read error...

Done!

Phone disconected!

Connect phone on selected interface...

Phone found!
Series 40 Device detected! 
read info...  - Ok

Reading Phone Info....
SW ver  : V 07.00 11-09-12 RM-647 (c) Nokia
IMEI    :      358624040586369
PPM     :      V 07.00
11-09-12
RM-647
(c) Nokia
EL
PCode   :      0592227
BPCode  :      059J889
HWID    :      3003
LCDVer  :      WIN:SERI:90
NT7542
IMEI    :      358624040586369
Sl Conf  : 001-01-00000000000
Sl Prof  : 000000000003000-2
Sl Aux   : 000B0000
Hw Sig   : E9A77C6273080487
Country      : Test SIM (Open)
Operator     : NOKIA (Open)

Lock info:
Block 1
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 2
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 3
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 4
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 5
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 6
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 7
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  

Done!

Initializing Tests...
IMEI : 358624040586369 , Phone : RM-647
Get keys...
PASSED | ST_WARRANTY_TEST
PASSED | ST_SIM_LOCK_TEST
PASSED | ST_PPM_VALIDITY_TEST
PASSED | ST_LCD_TEST
PASSED | ST_KEY
PASSED | ST_PA
PASSED | ST_ADC1
PASSED | ST_RTC_32KHZ
PASSED | ST_GPIO_LIGHT
PASSED | ST_HOOK_KEY
PASSED | ST_ACCESSORY
PASSED | ST_SIM_IF
->ERROR | ST_SIM_INSERTED
PASSED | ST_FLASHCHK
PASSED | ST_SECURIT
SelfTests end
Done!

Elapsed: 00:00:21

Backup Certificates now...
-> Infineon XG110 : IMEI Backup Created
Setting FlashMode
FlashMode set Ok
No answer from phone... :(
 - > 1. Check cable/connection, try again
 - > 2. Maybe HW fault or bad cable

Connect phone on selected interface...

Phone found!
Series 40 Device detected! 
read info...  - Ok

Reading Phone Info....
SW ver  : V 07.00 11-09-12 RM-647 (c) Nokia
IMEI    :      358624040586369
PPM     :      V 07.00
11-09-12
RM-647
(c) Nokia
EL
PCode   :      0592227
BPCode  :      059J889
HWID    :      3003
LCDVer  :      WIN:SERI:90
NT7542
IMEI    :      358624040586369
Sl Conf  : 001-01-00000000000
Sl Prof  : 000000000003000-2
Sl Aux   : 000B0000
Hw Sig   : E9A77C6273080487
Country      : Test SIM (Open)
Operator     : NOKIA (Open)

Lock info:
Block 1
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 2
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 3
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 4
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 5
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 6
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 7
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  

Done!

Reading LifeTimer data...
LifeTime is: 712920 seconds
Phone works: 198 Hours; 2 minutes; 0 seconds
Done

Resetting life Timer...
Reset Done!
Done

Resetting User Code to default (12345)...
Code reset done, now it 12345 :)
Done

Set phone in Normal mode...
Restarting...
Done!

Reading Phone Info....
SW ver  : V 07.00 11-09-12 RM-647 (c) Nokia
IMEI    :      358624040586369
PPM     :      V 07.00
11-09-12
RM-647
(c) Nokia
EL
PCode   :      0592227
BPCode  :      059J889
HWID    :      3003
LCDVer  :      WIN:SERI:90
NT7542
IMEI    :      358624040586369
Sl Conf  : 001-01-00000000000
Sl Prof  : 000000000003000-2
Sl Aux   : 000B0000
Hw Sig   : E9A77C6273080487
Country      : Test SIM (Open)
Operator     : NOKIA (Open)

Lock info:
Block 1
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 2
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 3
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 4
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 5
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 6
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 7
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  

Done!

Initializing Tests...
IMEI : 358624040586369 , Phone : RM-647
Get keys...
PASSED | ST_WARRANTY_TEST
PASSED | ST_SIM_LOCK_TEST
PASSED | ST_PPM_VALIDITY_TEST
PASSED | ST_LCD_TEST
PASSED | ST_KEY
PASSED | ST_PA
PASSED | ST_ADC1
PASSED | ST_RTC_32KHZ
PASSED | ST_GPIO_LIGHT
PASSED | ST_HOOK_KEY
PASSED | ST_ACCESSORY
NOT EXECUTED | ST_SIM_IF
->ERROR | ST_SIM_INSERTED
PASSED | ST_FLASHCHK
PASSED | ST_SECURIT
SelfTests end
Done!

Elapsed: 00:00:15

Phone disconected!

Connect phone on selected interface...