Re: Тестирование Новых возможностей BEST'a
#61
Цитата:
Сообщение от JayDi
Эта ошибка не говорит о проблеме сохранения, она говорит о запуске фс, точнее ошибке запуска. Необходимо проверит стоит-ли карта памяти в телефоне, попробовать вручную сменить режим на другой( локал-тест) и повторить операцию.
Интересует именно полный лог - когда уже программа нашла данные о книге, но защита отрубает процесс чтения.
|
Это то понятно, я к чему писал пост, что после прошивки в E71 (RM-346) SW 500.21.009 Best-ом, телефон вообще перестает входить в Local mode, даже принудительно от блока питания с резистором 8.2к на BSI, прошиваю Phoenix-ом SW 500.21.009, телефон прекрасно входит принудительно, от блока питания, в Local mode, вот об этом я хотел сообщить.
Код:
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Reading Phone Info....
Connected phone - Nokia E71
Software ver : V ICPR71_09w47.3 09-02-10 RM-346 (c) Nokia
IMEI :
Ape Ver : 410.21.010
APE Var : 410.21.010410.21.010_v14
APE ADSP: 256
DSP Ver : ICPR71_09w40
APE Test: RM346ENO74110920.037
PPM :
CNT :
Product SN : MQL533927
Product code : 0558842
Base Prd.code: 0552256
Module code :
Long Prod.SN : 0
Hardware info=======
HWID : 0915
Retu : 16
Tahvo : 22
Batery: 3797 mV
Camera:
CMT BT:
APE BT: HCI Version 8 (rev. 0). LMP Version 32 (rev. 4127). Manufacturer 13064.
APE HW: 256
LCDVer:
RF ic :
Lock info ===========
IMEI :
IMEI spNet : 3A 25 17 00 34 20 79 09
IMEI svNet : 33 25 17 00 34 20 79 59 F7
Conf key : 0000000000000000
Provider key : 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7
LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
CRT308 Backup Created... :)
User Code : Crypted and protected :(
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]
Done!
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : rm346_500.21.009_prd.c00
PPM : rm346_500.21.009_prd.v14
CNT : rm346_500.21.009.02U
APE : RM346_ENO_0741.10_08wk42.a36.fpsx
CNT3 : leevi_erase_y_drive.fpsx
Flashing phone now...
Check files done...
-> Check SW version...
FlashFile version : 500.21.009
Phone version : 410.21.010
-> Check SW version : Upgrade
Backup CRT308 data...
CRT308 Backup Created... :)
Check communication with phone....
ADL req restart
Communication verify done... Preparing...
Gathering phone info...
Check communication with phone...
Batery valtage : 3797 mV
-> Batery voltage less, than 3,8V (3797mV). Continue at user risk
Reboot....
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600010006400C192101051103
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 0B400113759A00523037DB9A98CB373F44C85F40
ASIC MODE ID: 00
ROOT KEY HASH: 479C6DDE3942E12C429C1D6ADED80371
ROM ID: 4B9B75103E691FF8
PatchRAWLoader: Patched OK
Processing RAWLOADER...
Processing UPDAPP...
Processing UPDAPP...
Boot Done! :)
TIME : Boot time : 00:00:34
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL Server confirm flashmode!
ADL : ASIC CMT select Ok
===Flashing [MCU]===
Erase : Processing rm346_500.21.009_prd.c00
Partitioning : Ok [7]
Found 3 areas to erase
Erasing area 0x00040000 - 0x007FFFFF, NAND, CMT
Result: 0000
Erasing area 0x00A00000 - 0x0759FFFF, NAND, CMT
Result: 0000
Erasing area 0x0F1C0000 - 0x0F8BFFFF, NAND, CMT
Result: 0000
Erase partition 0x0B
Partition erase Ok
Erase partition 0x09
Partition erase Ok
Erase partition 0x0A
Partition erase Ok
TIME : Erase time : 00:00:01
Write : Processing rm346_500.21.009_prd.c00
Total 588 [588/0/0] blocks to write, writing...
CMT : Writing Hash CERT [ADA]
CMT : Writing Hash CERT [KEYS]
CMT : Writing Hash CERT [PRIMAPP]
CMT : Writing Hash CERT [RAP3NAND]
CMT : Writing Hash CERT [PASUBTOC]
CMT : Writing Hash CERT [PAPUBKEYS]
CMT : Patch PAPUBKEYS
CMT : Writing Hash CERT [SOS*UPDAPP]
CMT : Writing Hash CERT [SOS*DSP0]
CMT : Writing Hash CERT [SOS*ISASW]
CMT : Writing Hash CERT [SOS*CORE]
CMT : Writing Hash CERT [SOS+ROFS]
TIME : Write time : 00:02:37
MCU Write done
===Flashing [PPM]===
Erase : Processing rm346_500.21.009_prd.v14
Found 1 areas to erase
Erasing area 0x05420000 - 0x0759FFFF, NAND, CMT
Result: 0000
Erase partition 0x09
Partition erase Ok
TIME : Erase time : 00:00:00
Write : Processing rm346_500.21.009_prd.v14
Total 214 [214/0/0] blocks to write, writing...
CMT : Writing Hash CERT [SOS+ROFX]
TIME : Write time : 00:00:36
PPM Write done
===Flashing [CNT]===
Erase : Processing rm346_500.21.009.02U
Erase partition 0x08
Partition erase Ok
TIME : Erase time : 00:00:00
Write : Processing rm346_500.21.009.02U
Total 145 [145/0/0] blocks to write, writing...
TIME : Write time : 00:00:25
CNT Write done
===Flashing [APE]===
Erase : Processing RM346_ENO_0741.10_08wk42.a36.fpsx
TIME : Erase time : 00:00:00
Write : Processing RM346_ENO_0741.10_08wk42.a36.fpsx
Total 18 [18/0/0] blocks to write, writing...
CMT : Writing Hash CERT [SOS*ENO]
TIME : Write time : 00:00:02
APE Write done
===Flashing [CNT3]===
Erase : Processing leevi_erase_y_drive.fpsx
Found 1 areas to erase
Erasing area 0x0F020000 - 0x0F1BFFFF, NAND, CMT
Result: 0000
TIME : Erase time : 00:00:00
Write : Processing leevi_erase_y_drive.fpsx
No any data for write, skip write
CNT Write done
=================
ADL : End flashing
ADL : Finalize...
Flashing done!
Total flash time : 00:03:43
Reboot phone now...
Flashing Failed! :( Maybee HW error, or Downgrade try???!
Connect phone on selected interface...
Done!
А так вот лог, когда телефон в Test mode
Код:
Phone found!
Series 60 Device detected!
read info... - Ok
Reading Phone Info....
Connected phone - Nokia E71
Software ver : V ICPR71_09w47.5 24-05-10 RM-346 (c) Nokia
IMEI :
Ape Ver : 500.21.009
APE Var : 500.21.009500.21.009_v46
APE ADSP: 256
DSP Ver : ICPR71_09w40
APE Test: RM346ENO74110842.a36
PPM :
CNT :
Product SN : MQL533927
Product code : 0577213
Base Prd.code: 0552256
Module code :
Long Prod.SN : 0
Hardware info=======
HWID : 0915
Retu : 16
Tahvo : 22
Batery: 3775 mV
Camera:
CMT BT:
APE BT: HCI Version 8 (rev. 0). LMP Version 32 (rev. 4127). Manufacturer 13064.
APE HW: 256
LCDVer:
RF ic :
Lock info ===========
IMEI :
IMEI spNet : 3A 25 17 00 34 20 79 09
IMEI svNet : 33 25 17 00 34 20 79 59 F9
Conf key : 0000000000000000
Provider key : 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7
LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
CRT308 Backup Created... :)
User Code : Crypted and protected :(
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]
Done!
Set phone in Test mode...
Restarting...
Done!
BackUp UserData : [PhoneBook]
Generation mode : [S60]
Operating mode is OK, no need change...
SmartPhone algo initialise...
Setup data...
StartUp FileSystem...
Getting keys...
Mount FileSystem...
Initialise FileSystem...
Get Device Id data...
Fsrun OK...
Detect Symbian OS Generation...
Detected: [Symbian OS 9.1/9.2] Phone!
Running : APE_TEST_SERVER,w11_08,(c)NMP
Found!
Will read 18 blocks...
Sorry, FS error : Phone not answer... :(
Error during read...
Error during read...
Последние файлы
