CD920-CD930
D520
L7089
M3188-M3288
M3588-M3688-M3788-M3888
P6088-M6088
P7389
P7389i
P7389i_Timeport260
P7689P7789_Timeport250
P8088
ST130
ST70
ST85_Slimlite
T180
T192
V100
V2288-T2288
V3688
V3690
V51-V50
V8088

                                      TaiChi WhiteCap Software Flash Procedure
                                                             For Motorola Internal Use Only
 

1. Use MotoFLex 76 using the same flash procedure as Leap or LeapR through EMMI.
   Please refer to mf76_man.pdf for MotoFlex usage guide.

2. Use V42_48_01 or greater version for emmi2b(SLN3577C);
   Use V62_48_34 or greater version for emmi2d(SLN3577D).

3. TaiChi software CF.10.10 and greater versions can ONLY be used on TaiChi P10 or greater hardware.
Phone with software CF.09.10 or lower version is required to use flash_fdi.hex and do phasing.

4. If you do not have capability to do phasing, pls go through the following procedures maually instead.
Required software: HPBASIC and EEUTIL.19, 
Location: ate.zip, hpbasic.zip, /export/releases/internal/taichi/whitecap/flash/.
Usage: copy /ate directory to c: root directory.

1) Start HPBASIC and run E.19, read full eeprom info from phone, and save to a file, e.g. tc_p10
2) Flash CP+FDI to the phone, e.g. flash_fdi.hex
3) Modify the file you saved: open file tc_p10, change the version number (first line), then change the EEPROM Map Version number ( the line under EEPROM Map Version ) according to release notes.
4) Start HPBASIC and run E.19, write file tc_p10 back to phone's EEPROM

The A008 (EMEA) A6188+ (Asia) is a GSM dual band (900/1800 MHz) GPRS
product, and is an enhanced version of A6188. From this point onwards we will
refer to this product as the A008. The A008 is mechanically very similar to the
existing A6188 form factor with slight modifications made to the flip and front.
Housing to ensure a different look.