принесли Fly MX330, юзер код на нём. Что требуется для оперативного решения, фулл на саппорт отправлю вечером (если требуется)?
COM1 selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read/check detailed information
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6227:8A02:8A01]...
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 89881500010001:89881500000000
flash: Intel Intel/Sharp ext [def 0004x008000 007Fx020000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
921600
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 89881500010001:89881500000000
flash: Intel Intel/Sharp ext [def 0004x008000 007Fx020000] 16Mb
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification, method #1...
detection phase #1...
detect device parameters finished
structure: 2nd [standard] (or higher) generation
protocol ver: 04
ver. sw1: SL388_MERID2M_PCB01_GPRS_MT6227_S01.MAUI_05C_W06_0 8_MP_V69_F1.BIN
ver. sw2: MAUI.05C.W06.08.MP.V69.F1
ffs offset/size: 00E00000/00200000
warning: invalid identification, ask/rpl calculation reqired
error: rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\id.._SL388_MERID2 M_PCB01_GPRS_MT6227_S01.MAUI_05C_W06_08_MP_V69_F1. BIN_FFFFFFFF_.rpl
warning: unknown identification structure: SL388_MERID2M_PCB01_GPRS_MT6227_S01.MAUI_05C_W06_0 8_MP_V69_F1.BIN_FFFFFFFF
error: ASK file can't be created, user action required:
1. download latest software from support area and try again !
2. if no still luck follow the next procedure:
- find good working phone with the same firmware:
SL388_MERID2M_PCB01_GPRS_MT6227_S01.MAUI_05C_W06_0 8_MP_V69_F1.BIN
- make "Read detailed information, ask/rpl" operation
- send "backup_system_log_..." file to support
- make "Read full flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone name etc.)
- be little bit patient and wait update
detecting eeprom area in 1 chip(s)...
flash: 89881500010001:89881500000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area: 00000000:00E00000-00FFFFFF
detection phase #3...
.................................................. ..............
done
detecting structure pass 1...
..................................
detect standard fat location pass #1...
.................................................. ......
detect extended fat location pass #1...
.................................................. ..
detect standard fat offset pass #1...
detect standard fat data...
layout detection complete
eeprom element #1 detected ok
Finished, time used: 62 sec
Remove/Install battery now !

Получилось разлочить китайским модулем. Ппрошивку выслал.

Спасибо,
А какой у него пинаут ?

MX300

подтверждаю