Samsung i5800 проблема с восстановлением boot
#1
ТА после неудачной прошивки, но как ни пробовал восстановить не получается.
Analyze JTAG:
Цитата:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.45
Selected Resurrector: [Samsung I5800 V1.00]
Connecting to the target...OK
Set I/O Voltage reads as 2.80V, TCK Frequency is 4 MHz
Following devices are found on the JTAG chain:
Device on TAP #0: ID = 0x2B900F0F, IR Length = 0x04 bits
Device on TAP #1: ID = 0x07B76F0F, IR Length = 0x05 bits
Total IR length: 0x0009 bits
|
Resurrection:
Цитата:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.45
Selected Resurrector: [Samsung I5800 V1.00]
Connecting to the dead body...OK
Detected dead body ID: 0x07B76F0F - CORRECT!
Set I/O Voltage reads as 2.81V, TCK Frequency is 4 MHz
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...FAILED
ERROR: RAM memory selftest failed.
|
P.S. Лежит S7230E с прибитым boot - ошибки те же самые. Распайку перепроверил,скорости менял , длинна проводов минимальна.
Последние файлы
