COM4 [VCP0] selected
module  v3.13
Device: Autodetect 6228-6239 NAND
Checking data, wait...
Action: read firmware NAND
interface: BROM_DLL_v3.952.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8A04:8A01
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0017]: 00AD:007600AD0076 [HYNIX] HY27XS08121M
chip size: 64Mb
page/spare size: 0200/0010
pages per block: 0020
bits i/o: 08
address cycles: 04
internal RAM size: 00010000
external RAM: absent
done
Set baudrate (921600)...
done
ram test...
testing...
ram test passed
===>  detect existing firmware structure...
detect ffs...
ffs offset/size: 03000000/01000000
firmware size: 48Mb
ffs size: 16Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: KODAR_3500_V001
detect NAND info...
number of areas/bytes to read: 1:00034000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
converting data...
done 0x00032800 bytes
incorrect ext bootloader signature: 1A99201C
bootloader version: _BOOTLOADER_KODAR_3500_V001.bin
incorrect bootloader signature: FEFFFFEA
incorrect bootloader signature: FEFFFFEA
nfi area detection finished: failed
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
rom info ver: 07
sw version: KODAR_3500_V001.BIN
project-id: KODAR_3500_V001, 00000000
code offset: 00000000
ffs offset/size [01]: 03000000/01000000
rom info structure: 2nd [standard] generation
TCL-ID is absent
===>  done
====================
New firmware detected (v.3.13, database date: 02.05.2010): 
KODAR_3500_V001.BIN

This firmware is missing in support area. If this phone is good and working:

- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to http://rapidshare.com or http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
area size: 48Mb
number of areas/bytes to read: 1:03000000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
file saved: C:\Documents and Settings\gsmcentras\Desktop\KODAR_3500_V001__firmware_20100527-193806.B4M.bin
Disconnect...
done
Finished, time used: 21 min 38 sec
Remove/Install battery now !

COM4 [VCP0] selected
module  v3.14
Device: Autodetect 6228-6239 NAND
Checking data, wait...
Action: read firmware NAND
interface: BROM_DLL_v3.952.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8A04:8A01
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0017]: 00AD:007600AD0076 [HYNIX] HY27XS08121M
chip size: 64Mb
page/spare size: 0200/0010
pages per block: 0020
bits i/o: 08
address cycles: 04
internal RAM size: 00010000
external RAM: absent
done
Set baudrate (921600)...
done
ram test...
testing...
ram test passed
===>  detect existing firmware structure...
detect ffs...
ffs offset/size: 03000000/01000000
firmware size: 48Mb
ffs size: 16Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: KODAR_3500_V001
detect NAND info...
number of areas/bytes to read: 1:00034000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
converting data...
done 0x00032800 bytes
incorrect ext bootloader signature: 1A99201C
bootloader version: _BOOTLOADER_KODAR_3500_V001.bin
incorrect bootloader signature: FEFFFFEA
incorrect bootloader signature: FEFFFFEA
nfi area detection finished: failed
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
rom info ver: 07
sw version: KODAR_3500_V001.BIN
project-id: KODAR_3500_V001, 00000000
code offset: 00000000
ffs offset/size [01]: 03000000/01000000
rom info structure: 2nd [standard] generation
TCL-ID is absent
===>  done
area size: 48Mb
number of areas/bytes to read: 1:03000000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_SPARE)...
file saved: C:\Documents and Settings\gsmcentras\Desktop\KODAR_3500_V001__firmware_20100528-183946.B4M.bin
Disconnect...
done
Finished, time used: 19 min 3 sec
Remove/Install battery now !