Re: Доработка NS PRO
#18
Цитата:
Сообщение от ravt
Скорее всего это AU9274, согласно даташиту для активации обсуждаемого режима нужно 15 вывод мс посадить на землю.
|
Цитата:
Сообщение от leomin
|
А зачем вам этот режим, если вы хотите избавиться от сообщения о недостаточном питании концентратора?
Судя по ДШ на TUSB2046B
Цитата:
bus-powered hub, ganged port power management
When used in bus-powered mode, the TUSB2046B supports up to four downstream ports by controlling a
TPS2041 device which is capable of supplying 100 mA of current to each downstream port. Bus-powered hubs
must implement power switching to ensure current demand is held below 100 mA when the hub is hot-plugged
into the system. Utilizing the TPS2041 for ganged power management provides over-current protection for the
downstream ports. The SN75240 transient suppressors reduce inrush current and voltage spikes on the data
lines. The OVRCUR signals should be tied together for a ganged operation.
self-powered hub, ganged port power management
The TUSB2046B can also be implemented for ganged port power management in a self-powered configuration.
The implementation is very similar to the bus-powered example with the exception that a self-powered port
supplies 500 mA of current to each downstream port. The over-current protection can be provided by a TPS2044
quad device or a TPS2024 single power switch.
|
А вы так навязчиво хотите активировать и без того включенный bus-powered
В AU9254 надо через резак 1ком кинуть ногу на плюс. Я так сделал у себя и избавился от надоевшего сообщения и лишнего хвоста.