Re: JTAG Manager v1.58 with ISP/Direct eMMC support
#16
Цитата:
Сообщение от halik-85
Парни, если есть желание обсудить тему, создаем отдельную тему в оффтопе, мусолим и о(б)суждаем. Попросили же, без страданий.
|
Дима, верно.
Площадка для критики RIFF
Цитата:
Сообщение от shurra
Приветствую. В софте есть переключение режимов 1-bit и 4-bit (D0 и D0-D3). В старом боксе есть возможность сделать общение с emmc по 4-бит шине или это уже задел в софте для нового бокса? В коннекторе вроде ещё есть три свободных пина.
|
RIFF1 работает с одной шиной DAT0
Цитата:
Сообщение от Mumang
.
Списки моделей PKG
|
???
модель выбираете сами и создаёте сами свои особенные файлы
Цитата:
Сообщение от Mumang
.
что предлагается конкретнее за эти активации, а то громко звучит - Улучшена работа плагинов- Чтение - запись и так далее, эксклюзива никакого, а активации продают уже
|
JTAG Manager 1.58
---------------------------
- added direct eMMC Access Interface on the RIFFBOX RJ-45 port (check pinout picture for CMD, CLK, DAT0, etc pins positions).
- added eMMC/SD Access page for Read/Write operations on eMMC/SD card via direct interface
- added eMMC/SD Advanced dialog which allows to perform advanced operations with eMMC/SD cards
(reading info, browsing through OCR, CID, CSD (and EXT_CSD for eMMC only) registers' fields, edit separate fields and writting back to card, reading/writting eMMC card's MCU's internal firmware, etc)
- added convenient information presentation for specific eMMC chips: pinouts for testpoints, manuals how to use testpoints to resurrect dead eMMC, etc). These INFO files (*.riffinfo) are stored in JTAG Manager's Documents folder and can be downloaded via generic <Check for Updates> operation.
- added eMMC Firmware Update option
- added eMMC Firmware Reading option (firmware is stored in *.riffemmcfw format)
For firmware read need to select chip from the list
- *.riffemmcfw eMMC firmware files are now used by RIFF for firmware updates (plain binary files are supported too)
- added elapsed time info for eMMC firmware update stages
- added eMMC Testpoint info displaying (info files must be downloaded from support and are located in the JTAG Manager's 'Documents' folder.
- added CMD42 Lock/Unlock functionality for eMMC. User can set/change/remove password to protect/unprotect (lock/unclock) the User Area Partition
- added the User Area Partition Forced Erase to erase Locked User Area Partition and to reset Device lock/unlock state and password (CMD42's consequences)
- added Samsung Factory Erase which erases and re-formats the Samsung eMMC chips.
- fixed bug displaying wrong SD card size for cards capacity less than 2GB
- few small improvements and bug fixes
Firmware 1.38
- added direct eMMC Access Interface functionality
- improved one thing in the emmc communication
- added the CMD42 Lock/Unlock/Pasword reset features
- added Forced erase of locked User Area Partition
- added Samsung eMMC Factory Formwat
- fixed bug for SD card support
- eMMC firmware update feature added