Kallter
05.06.2018, 12:54
Доброго дня. Не удается снять FRP с данного планшета.
Лог CM2MTK:Wait for phone...
Phone found! [ 65 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6737
BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x07000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : LOCKED with SLA
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
[DA_ERROR] : DONE
Boot Error!
Operation Failed
Elapsed: 00:00:09
Reconnect Power/Cable!
Лог MRT:Searching Mobile Port...
Get Mobile Port is: COM65
>>> Device driver identification:
MTK USB Port
>>> Mobile Has Connect...
CPU_NAME: MT6735
>>> Reading Mobile Hardware Info...Success
HW_Inf: 8A00 SW_Inf: CB00
>>> Initialization Mobile ...Success
>>> Downloading Boot1 To Mobile Phone...Fail
Лог UFI:BROM version[1]: 7.1625.3.0
Loading DA: MTK_AllInOne_DA.bin (6.11 MiB)
version: 3.3001.00.00, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Scanning BootROM or Preloader port... Done.
Detected MTK USB Port (COM65)
USB Driver: [MediaTek Inc.] usbser, version: 2.0.0.1, date: 1-5-2012
Connecting Bootrom... failed
Error: -1073545198 (STATUS_SEC_AUTH_FILE_NEEDED)
Чем можно попробовать подступиться к данному аппарату?
Лог CM2MTK:Wait for phone...
Phone found! [ 65 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6737
BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x07000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : LOCKED with SLA
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
[DA_ERROR] : DONE
Boot Error!
Operation Failed
Elapsed: 00:00:09
Reconnect Power/Cable!
Лог MRT:Searching Mobile Port...
Get Mobile Port is: COM65
>>> Device driver identification:
MTK USB Port
>>> Mobile Has Connect...
CPU_NAME: MT6735
>>> Reading Mobile Hardware Info...Success
HW_Inf: 8A00 SW_Inf: CB00
>>> Initialization Mobile ...Success
>>> Downloading Boot1 To Mobile Phone...Fail
Лог UFI:BROM version[1]: 7.1625.3.0
Loading DA: MTK_AllInOne_DA.bin (6.11 MiB)
version: 3.3001.00.00, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Scanning BootROM or Preloader port... Done.
Detected MTK USB Port (COM65)
USB Driver: [MediaTek Inc.] usbser, version: 2.0.0.1, date: 1-5-2012
Connecting Bootrom... failed
Error: -1073545198 (STATUS_SEC_AUTH_FILE_NEEDED)
Чем можно попробовать подступиться к данному аппарату?