CM2QLM Тест, логи удачных операций и файлы QCN

[Dr_Wolodya]

Lenovo A6000 (Qualcomm MSM8916 Snapdragon 410).

"]Operation : Identify [ v1.04 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 0C752621
ID_BLOCK_I : 007050E1
ID_BLOCK_L : 5BF3348E6D888DD0
ID_BLOCK_L : C060A78CC5DBBC1C
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000
Boot Ok!


Brand : Lenovo
ProdName : Kraft-A6000
ProdModel : Lenovo A6000
Device : Kraft-A6000
AndroidVer: 5.0.2
Manufact. : LENOVO
QLMxCPU : MSM8916

Done!
Elapsed: 00:00:13

"]Operation : Read PatternLock [ v1.04 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...

Device not found!
Check cable, connection and drivers!

Reconnect Power/Cable!

Operation : Read PatternLock [ v1.04 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 0C752621
ID_BLOCK_I : 007050E1
ID_BLOCK_L : 5BF3348E6D888DD0
ID_BLOCK_L : C060A78CC5DBBC1C
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000
Boot Ok!

Read Ok! Trying decrypt ...
PatternLock sequence : 15963247

Done!
Elapsed: 00:00:37

"]Operation : Read Flash [ v1.04 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 0C752621
ID_BLOCK_I : 007050E1
ID_BLOCK_L : 5BF3348E6D888DD0
ID_BLOCK_L : C060A78CC5DBBC1C
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000
Boot Ok!


Brand : Lenovo
ProdName : Kraft-A6000
ProdModel : Lenovo A6000
Device : Kraft-A6000
AndroidVer: 5.0.2
Manufact. : LENOVO
QLMxCPU : MSM8916

DevInfo : MSM8916__LENOVO__Lenovo__ANDR_v5.0.2__Lenovo_A6000 __Kraft-A6000__Kraft-A6000

Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : hyp.mbn
[Read Ok] : splash.img
[Read Ok] : fs_gc.img
[Read Ok] : sec.dat
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : persist.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : oem.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8916 / eMMC
Firmware Size : 2107 MiB

Done!
Elapsed: 00:05:53

Reconnect Power/Cable!


"]Operation : Reset Settings [ v1.04 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 0C752621
ID_BLOCK_I : 007050E1
ID_BLOCK_L : 5BF3348E6D888DD0
ID_BLOCK_L : C060A78CC5DBBC1C
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000
Boot Ok!

Format USER ...
Format CACHE ...
Format Ok!
Remove FRP ( Google Reset Protection )
FRP removed!

Done!
Elapsed: 00:00:16

Reconnect Power/Cable!

[drakomag]

Xiaomi Redmi Note 3 Pro Special Edition - (Kate) (Qualcomm MSM8952 Snapdragon 652).
"]Operation : Identify [ v1.10 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 652 [MSM8976]
ID_BLOCK_S : 01E80831
ID_BLOCK_I : 009B00E1
ID_BLOCK_L : 2D6AF9D5676E52058CC090D74B3BC3F4
ID_BLOCK_L : B04C269D507B6BC3BC0FC4BFB82EFAAF
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8976 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB400000 [ eMMC 16 GiB ]
ExtInfo : 0x0000C000/00100000/00001000/00001000
Storage : MFR : 0x11 , VENDOR : TOSHIBA , NAME : 016G32
Boot Ok!


Brand : Xiaomi
ProdName : kate
ProdModel : Redmi Note 3
Device : kate
AndroidVer: 6.0.1
Manufact. : Xiaomi
QLMxCPU : MSM8952

Done!
Elapsed: 00:00:08
"]Operation : Reset Settings [ v1.10 ]


1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 652 [MSM8976]
ID_BLOCK_S : 01E80831
ID_BLOCK_I : 009B00E1
ID_BLOCK_L : 2D6AF9D5676E52058CC090D74B3BC3F4
ID_BLOCK_L : B04C269D507B6BC3BC0FC4BFB82EFAAF
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8976 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB400000 [ eMMC 16 GiB ]
ExtInfo : 0x0000C000/00100000/00001000/00001000
Storage : MFR : 0x11 , VENDOR : TOSHIBA , NAME : 016G32
Boot Ok!

Format USER ...
Format CACHE ...
Format Ok!
Remove FRP ( Google Reset Protection )
FRP removed!

Done!
Elapsed: 00:00:08

"]
Operation : Reset Settings [ v1.10 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 652 [MSM8976]
ID_BLOCK_S : 01E80831
ID_BLOCK_I : 009B00E1
ID_BLOCK_L : 2D6AF9D5676E52058CC090D74B3BC3F4
ID_BLOCK_L : B04C269D507B6BC3BC0FC4BFB82EFAAF
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8976 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB400000 [ eMMC 16 GiB ]
ExtInfo : 0x0000C000/00100000/00001000/00001000
Storage : MFR : 0x11 , VENDOR : TOSHIBA , NAME : 016G32
Boot Ok!

MSC format Ok!
USERDATA format Ok!
CACHE format Ok!

Done!
Elapsed: 00:00:42

Reconnect Power/Cable!

[iGoogle]

Wileyfox Swift SnapDragon 410 MSM8916
"]Operation : Identify [ v1.10 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 176382A4
ID_BLOCK_I : 007050E1
ID_BLOCK_L : 3E9E8A9E3B2F33E1E71DBD1C035F3A6C
ID_BLOCK_L : F7A30AF761D0BBBF3683B29960685872
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000
Boot Ok!


Brand : Wileyfox
ProdName : Swift
ProdModel : Wileyfox Swift
Device : crackling
AndroidVer: 6.0.1
Manufact. : Wileyfox
QLMxCPU : MSM8916

Done!
Elapsed: 00:00:08

Reconnect Power/Cable!


"]Operation : Reset Settings [ v1.10 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 176382A4
ID_BLOCK_I : 007050E1
ID_BLOCK_L : 3E9E8A9E3B2F33E1E71DBD1C035F3A6C
ID_BLOCK_L : F7A30AF761D0BBBF3683B29960685872
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000
Boot Ok!

Format USER ...
Format CACHE ...
Format Ok!
Reset Ok!

Done!
Elapsed: 00:00:12

Reconnect Power/Cable!


"]Operation : Reset UserLocks [ v1.10 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 176382A4
ID_BLOCK_I : 007050E1
ID_BLOCK_L : 3E9E8A9E3B2F33E1E71DBD1C035F3A6C
ID_BLOCK_L : F7A30AF761D0BBBF3683B29960685872
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000
Boot Ok!

Direct access : Ok!
Processing step #1
Processing step #2
Processing step #3
Processing step #4
Processing step #5
Processing step #6
Processing step #7

UserLocks reset passed!
1. Power On phone, wait 30-50 second, press and hold PowerOn button until device restart!
2. To disable/remove fingerprints enter in Settings -> FingerPrint, set any password, remove fingerprints
3. In some cases require reboot phone twice or wait up to 5 minutes!

Done!
Elapsed: 00:00:27

Reconnect Power/Cable!



Добавлено через 7 минут
Alcatel OT-6039Y Idol 3 SnapDragon 410 MSM8916
"]1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 0E33D4D5
ID_BLOCK_I : 007050E1
ID_BLOCK_L : D21248B6218DBAB592C70916D1A82820
ID_BLOCK_L : EE652B82771E40C5F837985153524C8F
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000
Boot Ok!


Brand : TCL
ProdName : 6039Y
ProdModel : 6039Y
Device : idol347
AndroidVer: 5.0.2
Manufact. : TCL
QLMxCPU : MSM8916

Done!
Elapsed: 00:00:22

Reconnect Power/Cable!

"]1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 0E33D4D5
ID_BLOCK_I : 007050E1
ID_BLOCK_L : D21248B6218DBAB592C70916D1A82820
ID_BLOCK_L : EE652B82771E40C5F837985153524C8F
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000
Boot Ok!


Brand : TCL
ProdName : 6039Y
ProdModel : 6039Y
Device : idol347
AndroidVer: 5.0.2
Manufact. : TCL
QLMxCPU : MSM8916

DevInfo : MSM8916__TCL__TCL__ANDR_v5.0.2__6039Y__idol347__60 39Y

Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : nvram.img
[Read Ok] : perso.img
[Read Ok] : sbl1.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : hyp.mbn
[Read Ok] : secro.img
[Read Ok] : fs_gc.img
[Read Ok] : sec.dat
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : system.img
[Read Ok] : persist.img
[Read Ok] : splash.img
[Read Ok] : tctperso.img
[Read Ok] : cache.img
[Read Ok] : misc.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8916 / eMMC
Firmware Size : 2018 MiB

Done!
Elapsed: 00:02:48

Reconnect Power/Cable!
"]1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 0E33D4D5
ID_BLOCK_I : 007050E1
ID_BLOCK_L : D21248B6218DBAB592C70916D1A82820
ID_BLOCK_L : EE652B82771E40C5F837985153524C8F
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000
Boot Ok!

Direct access : Ok!

Recovery PhoneBook ...
Read Ok, extract ...
Load Ok!
Verify Ok!
Details : 0x00BF,0x0160,022A
Export HTML Ok
Export VCF Ok

Contacts count : 117

Data saved to : C:\MOBILE\CM2QLM\phdata\Data_export\0E33D4D5___MSM 8916__TCL__6039Y\

Done!
Elapsed: 00:00:18

Reconnect Power/Cable!BB_IDC_CPU : SnapDragon 410 [MSM8916]

[Alex_Tom]

Xiaomi Redmi Note 3 Pro
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 652 [MSM8976]
ID_BLOCK_S : 013EA3C8
ID_BLOCK_I : 009B00E1
ID_BLOCK_L : 460380BE0E05CBAE27B9077ED240B89F
ID_BLOCK_L : 06F68C2BEACDC515C2A57E691680AC11
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8976 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ]
ExtInfo : 0x0000C000/00100000/00001000/00001000
Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : BJNB4R
Boot Ok!


Brand : Xiaomi
ProdName : kenzo
ProdModel : Redmi Note 3
Device : kenzo
AndroidVer: 6.0.1
Manufact. : Xiaomi
QLMxCPU : MSM8952

Done!
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 652 [MSM8976]
ID_BLOCK_S : 013EA3C8
ID_BLOCK_I : 009B00E1
ID_BLOCK_L : 460380BE0E05CBAE27B9077ED240B89F
ID_BLOCK_L : 06F68C2BEACDC515C2A57E691680AC11
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8976 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ]
ExtInfo : 0x0000C000/00100000/00001000/00001000
Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : BJNB4R
Boot Ok!


Brand : Xiaomi
ProdName : kenzo
ProdModel : Redmi Note 3
Device : kenzo
AndroidVer: 6.0.1
Manufact. : Xiaomi
QLMxCPU : MSM8952

DevInfo : MSM8952__Xiaomi__Xiaomi__ANDR_v6.0.1__Redmi_Note_3 __kenzo__kenzo

Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : hyp.mbn
[Read Ok] : adspso.bin
[Read Ok] : ddr.bin
[Read Ok] : fs_gc.img
[Read Ok] : sec.dat
[Read Ok] : splash.img
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : persist.img
[Read Ok] : misc.img
[Read Ok] : mdtp.img
[Read Ok] : cust.img
[Read Ok] : cmnlib.mbn
[Read Ok] : keymaster.mbn
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8976 / eMMC
Firmware Size : 2950 MiB

Done!
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 652 [MSM8976]
ID_BLOCK_S : 013EA3C8
ID_BLOCK_I : 009B00E1
ID_BLOCK_L : 460380BE0E05CBAE27B9077ED240B89F
ID_BLOCK_L : 06F68C2BEACDC515C2A57E691680AC11
Pickup loader from firmware package
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8976 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ]
ExtInfo : 0x0000C000/00100000/00001000/00001000
Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : BJNB4R
Boot Ok!

Files in Chain : 42
Flashing now

Flashing : gpt_main0.bin
Flashing : NON-HLOS.bin
Flashing : sbl1.mbn
Flashing : sbl1.mbn
Flashing : rpm.mbn
Flashing : rpm.mbn
Flashing : tz.mbn
Flashing : tz.mbn
Flashing : hyp.mbn
Flashing : hyp.mbn
Flashing : adspso.bin
Flashing : sec.dat
Flashing : splash.img
Flashing : emmc_appsboot.mbn
Flashing : emmc_appsboot.mbn
Flashing : boot.img
Flashing : recovery.img
Flashing : system.img
Flashing : cache.img
Flashing : persist.img
Flashing : misc.img
Flashing : mdtp.img
Flashing : cust.img
Flashing : cmnlib.mbn
Flashing : keymaster.mbn
Flashing : cmnlib.mbn
Flashing : keymaster.mbn
Flashing : userdata.img
Flashing : gpt_backup0.bin

Boot settings configured!

Flashing done!

Done!
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 652 [MSM8976]
ID_BLOCK_S : 013EA3C8
ID_BLOCK_I : 009B00E1
ID_BLOCK_L : 460380BE0E05CBAE27B9077ED240B89F
ID_BLOCK_L : 06F68C2BEACDC515C2A57E691680AC11
Pickup loader from firmware package
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8976 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ]
ExtInfo : 0x0000C000/00100000/00001000/00001000
Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : BJNB4R
Boot Ok!

Format USER ...
Format CACHE ...
Format Ok!
Remove FRP ( Google Reset Protection )
FRP removed!

Done!
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 652 [MSM8976]
ID_BLOCK_S : 013EA3C8
ID_BLOCK_I : 009B00E1
ID_BLOCK_L : 460380BE0E05CBAE27B9077ED240B89F
ID_BLOCK_L : 06F68C2BEACDC515C2A57E691680AC11
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8976 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ]
ExtInfo : 0x0000C000/00100000/00001000/00001000
Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : BJNB4R
Boot Ok!


MIAccount reset passed!

Normal reset :
> Select "FORCED FIX" or "REPAIR" in FMT settings, press "Format FS / Reset Settings"
> PowerOn device and use. IF Device stuck on black screen with cable - use another FMT
> Not all devices supported yet! (tested on Hydrogen,Land,Redmi2)

Done!
Аккаунт успешно снят, обе симки работают, чего не скажешь о BST - после него работала только sim1

[Manhn]

Xiaomi Redmi 3s


Operation : Identify [ v1.10 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 430 [MSM8937]
ID_BLOCK_S : 40B5B377
ID_BLOCK_I : 0004F0E1
ID_BLOCK_L : 97D0336FDDD41C5F760AD69105F1094E
ID_BLOCK_L : 7F79F35265B45E8C4BD2F7F28DF92598
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8937 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB400000 [ eMMC 16 GiB ]
ExtInfo : 0x0000C000/00100000/00001000/00001000
Storage : MFR : 0x11 , VENDOR : TOSHIBA , NAME : 016G70
Boot Ok!


Brand : Xiaomi
ProdName : land
ProdModel : Redmi 3S
Device : land
AndroidVer: 6.0.1
Manufact. : Xiaomi
QLMxCPU : MSM8937

Done!
Elapsed: 00:00:07


Operation : Reset Settings [ v1.10 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 430 [MSM8937]
ID_BLOCK_S : 40B5B377
ID_BLOCK_I : 0004F0E1
ID_BLOCK_L : 97D0336FDDD41C5F760AD69105F1094E
ID_BLOCK_L : 7F79F35265B45E8C4BD2F7F28DF92598
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8937 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB400000 [ eMMC 16 GiB ]
ExtInfo : 0x0000C000/00100000/00001000/00001000
Storage : MFR : 0x11 , VENDOR : TOSHIBA , NAME : 016G70
Boot Ok!

Format USER ...
Format CACHE ...
Format Ok!

Done!
Elapsed: 00:00:15

Reconnect Power/Cable!

Read PatternLock, Reset UserLocs, Data Recovery на android 6.0.1 естественно не сработали, пока)

[ohotneek]

доброго времени суток ! вот уже час прошел как не могу законектить Alcatel One Touch Idol S OT-6034R нужно разлочить от сети оператор(orange) проц Qualcomm (Snapdragon 400 MSM8930) Snapdragon S4 Plus 2013 32 bit. Вроде с дровами проблем нет в ком портах отображается как Diagnostics port 9006 (COM 37)
вот логи
Operation : Identify [ v1.13 ]
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device not found!
Check cable, connection and drivers!
Reconnect Power/Cable!
так же пробовал с другим шнуром кинул перемычку как ребята советовали ноооо пока тщетно....зажимаю обе кнопки соединяю есть звук что соединился и все

[DeeJay_145]

доброго времени суток ! вот уже час прошел как не могу законектить Alcatel One Touch Idol S OT-6034R нужно разлочить от сети оператор(orange) проц Qualcomm (Snapdragon 400 MSM8930) Snapdragon S4 Plus 2013 32 bit. Вроде с дровами проблем нет в ком портах отображается как Diagnostics port 9006 (COM 37)
вот логи
Operation : Identify [ v1.13 ]
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device not found!
Check cable, connection and drivers!
Reconnect Power/Cable!
так же пробовал с другим шнуром кинул перемычку как ребята советовали ноооо пока тщетно....зажимаю обе кнопки соединяю есть звук что соединился и все
Чтобы законектится нужно установит драйвера с поддержки! Комп должен видит как "Nokia Energy Driver Qualcomm"
И зачем вам всё это, ведь в CM2QLM пока нету функции разблокировки оператора(unlock).

[babycry]

Xiaomi Redmi Note 4 Global:
Operation : Identify [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 625 [MSM8953]
ID_BLOCK_S : 4ABA85AE
ID_BLOCK_I : 000460E1
ID_BLOCK_L : A0E97A58E4E3D5880943ED58CCBE5E71
ID_BLOCK_L : 827208AF6E4959914ED9FAED8AFC289D
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8953 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x90 , VENDOR : HYNIX , NAME : HBG4a2
Boot Ok!


Brand : xiaomi
ProdName : mido
ProdModel : Redmi Note 4
Device : mido
AndroidVer: 7.0
Manufact. : Xiaomi
SysPatch : NRD90M
DevComTime: 27.10.2017 18:15:09
QLMxCPU : MSM8953

USERData : ENCRYPTED
GCSec : NORMAL

Done!
Elapsed: 00:00:13

Reconnect Power/Cable!
Operation : EDL Security Operation [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 625 [MSM8953]
ID_BLOCK_S : 4ABA85AE
ID_BLOCK_I : 000460E1
ID_BLOCK_L : A0E97A58E4E3D5880943ED58CCBE5E71
ID_BLOCK_L : 827208AF6E4959914ED9FAED8AFC289D
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8953 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x90 , VENDOR : HYNIX , NAME : HBG4a2
Boot Ok!

Backup Security Partitions
Backup : FSG
Backup : MODEMST1
Backup : MODEMST2
Backup saved to : C:\Program Files\InfinityBox\CM2QLM\Backup\MSM8953_[000460E1]_4ABA85AE_SEC\

Done!
Elapsed: 00:00:21

Reconnect Power/Cable!
Operation : Reset Settings [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 625 [MSM8953]
ID_BLOCK_S : 4ABA85AE
ID_BLOCK_I : 000460E1
ID_BLOCK_L : A0E97A58E4E3D5880943ED58CCBE5E71
ID_BLOCK_L : 827208AF6E4959914ED9FAED8AFC289D
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8953 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x90 , VENDOR : HYNIX , NAME : HBG4a2
Boot Ok!


MIAccount reset passed!

Complete reset :
> If device lock after WiFi - use RESET MI APP
> PowerOn device, NOT power WiFi, SIM and etc. Make device setup
> Reset MI APP. Device will not have MIServices anymore


Done!
Elapsed: 00:00:34

Reconnect Power/Cable!

[chabrus]

General Mobile Android One

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 17BB34A8
ID_BLOCK_L : 3DC7BD59F4626F9A453ADA3B045FD7F7
ID_BLOCK_L : 96ED53FAFF66C85D70BF10C9DB2AC407
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!


Brand : google
Device : seed
AndroidVer: 7.0
Manufact. : import /oem/oem.prop ro.product.manufacturer
SysPatch : NRD91J
DevComTime: 27.09.2016 5:29:55
QLMxCPU : MSM8916

USERData : NORMAL
GCSec : NORMAL

Done!
Elapsed: 00:00:15


Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 17BB34A8
ID_BLOCK_L : 3DC7BD59F4626F9A453ADA3B045FD7F7
ID_BLOCK_L : 96ED53FAFF66C85D70BF10C9DB2AC407
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!

Format USER ...
Format CACHE ...
Format Ok!
Remove FRP
Reset Ok!

Done!
Elapsed: 00:00:29


Добавлено через 55 часов 54 минуты
LG D855.

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 801 [MSM8974]
ID_BLOCK_S : 0A9B13D9
ID_BLOCK_E : 00310000
ID_BLOCK_L : EE164C8A25B1BEA996CB050AD5AC2424
ID_BLOCK_L : 760DB31A1F8628BD509FF0293BCAE4E7
Use CM2 Internal Loader

ERROR : Prepare target failed! Unsupported SecureType!
INFO : Send log and report.log to support! Include device info also!

Reconnect Power/Cable!

Но есть один момент, не знаю важен или нет. Аппарат не включается, определяется как 9008. Возможно неисправна ЕММС. Пока не разбирал.

[Serg55]

Но есть один момент, не знаю важен или нет. Аппарат не включается, определяется как 9008. Возможно неисправна ЕММС. Пока не разбирал.
Unsupported SecureType!

[chabrus]

Xiaomi Redmi 4X
Аппарат с китайской прошивкой на борту. Bootoader заблокирован.
Прошил глобальной через ТР.


Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 435 [MSM8940]
ID_BLOCK_S : 57C00407
ID_BLOCK_L : 0740C3FF4D448CEFE6FA46019501F9DE
ID_BLOCK_L : 88740EA56843439B4427FCE79006D297
Pickup loader from firmware package
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8937 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x45 , VENDOR : SANDISK , NAME : DL2032
Boot Ok!
Flash Chain : 51
Flashing now

Flashing : gpt_main0.bin
Flashing : NON-HLOS.bin
Flashing : sbl1.mbn
Flashing : sbl1.mbn
Flashing : rpm.mbn
Flashing : rpm.mbn
Flashing : tz.mbn
Flashing : tz.mbn
Flashing : devcfg.mbn
Flashing : devcfg.mbn
Flashing : adspso.bin
Flashing : sec.dat
Flashing : splash.img
Flashing : emmc_appsboot.mbn
Flashing : emmc_appsboot.mbn
Flashing : boot.img
Flashing : recovery.img
Flashing : system.img
Flashing : cache.img
Flashing : persist.img
Flashing : misc.img
Flashing : lksecapp.mbn
Flashing : lksecapp.mbn
Flashing : cmnlib.mbn
Flashing : cmnlib.mbn
Flashing : cmnlib64.mbn
Flashing : cmnlib64.mbn
Flashing : keymaster.mbn
Flashing : keymaster.mbn
Flashing : cust.img
Flashing : userdata.img
Flashing : gpt_backup0.bin
Wipe data ...

BootConfig set to 0x00

Flashing done!

Done!
Elapsed: 00:04:00


Добавлено через 22 часа 13 минут
Xiaomi Mi4c

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 808 [MSM8992]
ID_BLOCK_S : 0110991A
ID_BLOCK_L : 347DEECC7077B9FC95EF792CA012EAED
ID_BLOCK_L : D8245EF5381333EB9477AC97E05682C7
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8992 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB400000 [ eMMC 16 GiB ]
ExtInfo : 0x0001C000/00100000/00000400/00001000/00000200
Boot Ok!


Brand : Xiaomi
ProdName : libra
ProdModel : Mi-4c
Device : libra
AndroidVer: 7.0
Manufact. : Xiaomi
QLMxCPU : MSM8992

DevInfo : MSM8992__Xiaomi__Xiaomi__ANDR_v7.0__Mi-4c__libra__libra

Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : sbl1.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : hyp.mbn
[Read Ok] : ddr.bin
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : misc.img
[Read Ok] : btfm.mbn
[Read Ok] : pmic.bin
[Read Ok] : deploy.mbn
[Read Ok] : lsplash.img
[Read Ok] : fs_gc.img
[Read Ok] : NON-HLOS.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : persist.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : cust.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8992 / eMMC
Firmware Size : 1849 MiB

Done!
Elapsed: 00:03:39

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 808 [MSM8992]
ID_BLOCK_S : 0110991A
ID_BLOCK_L : 347DEECC7077B9FC95EF792CA012EAED
ID_BLOCK_L : D8245EF5381333EB9477AC97E05682C7
Pickup loader from firmware package
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8992 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB400000 [ eMMC 16 GiB ]
ExtInfo : 0x0001C000/00100000/00000400/00001000/00000200
Boot Ok!

Flash Chain : 47
Flashing now

Flashing : sbl1.mbn
Flashing : sbl1.mbn
Flashing : rpm.mbn
Flashing : rpm.mbn
Flashing : tz.mbn
Flashing : tz.mbn
Flashing : hyp.mbn
Flashing : hyp.mbn
Flashing : emmc_appsboot.mbn
Flashing : emmc_appsboot.mbn
Flashing : BTFM.bin
Flashing : pmic.mbn
Flashing : pmic.mbn
Flashing : sdi.mbn
Flashing : logo.img
Flashing : bk2.img
Flashing : NON-HLOS.bin
Flashing : boot.img
Flashing : recovery.img
Flashing : system.img
Flashing : cache.img
Flashing : cust.img
Flashing : userdata.img
Flashing : gpt_main0.bin
Flashing : gpt_backup0.bin

Flash sequence completed!

Applying patches for storage # 0
Records : 26
Patch sequence completed!

BootConfig set to 0x00

Flashing done!

Done!
Elapsed: 00:02:37

[Alex_Tom]

Xiaomi Redmi 4X
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 435 [MSM8940]
ID_BLOCK_S : 46B3D500
ID_BLOCK_L : 1E5BC8E6565D83D6FFF15F069A08F0C7
ID_BLOCK_L : 7D7BF15067B6508E49D0F1F483FB279A
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8937 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : RX1BMB
Boot Ok!


Brand : Xiaomi
ProdName : santoni
ProdModel : Redmi 4X
Device : santoni
AndroidVer: 7.1.2
Manufact. : Xiaomi
SysPatch : N2G47H
DevComTime: 07.11.2017 8:59:05
QLMxCPU : MSM8937

USERData : ENCRYPTED
GCSec : NORMAL

Done!
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 435 [MSM8940]
ID_BLOCK_S : 46B3D500
ID_BLOCK_L : 1E5BC8E6565D83D6FFF15F069A08F0C7
ID_BLOCK_L : 7D7BF15067B6508E49D0F1F483FB279A
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8937 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : RX1BMB
Boot Ok!

Format USER ...
Format CACHE ...
Format Ok!
Remove FRP
Reset Ok!

Done!
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 435 [MSM8940]
ID_BLOCK_S : 46B3D500
ID_BLOCK_L : 1E5BC8E6565D83D6FFF15F069A08F0C7
ID_BLOCK_L : 7D7BF15067B6508E49D0F1F483FB279A
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8937 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : RX1BMB
Boot Ok!


MIAccount reset passed!

Device may relock back on WiFi/Network enable!


Done!
Mi аккаунт снят, при подключении к интернету не блокируется.

[slaventiy76]

ImSmart S471 ( MSM8212 )

Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 2x/4x|00 [MSM8x12]
ID_BLOCK_S : 08B39427
ID_BLOCK_L : BC443ED877E3E81BC4B95B4483DE5676
ID_BLOCK_L : 6EE5AB02F79EC04578B718D1D3D2CC0F
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8x10 , FLASH : eMMC , mVER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000/00000000
Boot Ok!


Brand : ImSmart
ProdName : ImSmart
ProdModel : ImSmart S471
Device : I7A_Navigator
AndroidVer: 4.3
Manufact. : Impression
SysPatch : JLS36C
DevComTime: 22.01.2015 7:27:45
QLMxCPU : MSM8610

USERData : NORMAL
GCSec : NORMAL

Done!Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 2x/4x|00 [MSM8x12]
ID_BLOCK_S : 08B39427
ID_BLOCK_L : BC443ED877E3E81BC4B95B4483DE5676
ID_BLOCK_L : 6EE5AB02F79EC04578B718D1D3D2CC0F
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8x10 , FLASH : eMMC , mVER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000/00000000
Boot Ok!


Brand : ImSmart
ProdName : ImSmart
ProdModel : ImSmart S471
Device : I7A_Navigator
AndroidVer: 4.3
Manufact. : Impression
QLMxCPU : MSM8610

DevInfo : MSM8610__Impression__ImSmart__ANDR_v4.3__ImSmart_S 471__I7A_Navigator

Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : fs_gc.img
[Read Ok] : sbl1.mbn
[Read Ok] : deploy.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : misc.img
[Read Ok] : usbdisk.img
[Read Ok] : NON-HLOS.bin
[Read Ok] : boot.img
[Read Ok] : persist.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : system.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8x10 / eMMC
Firmware Size : 1017 MiB

Done!Initialize ...
DiagMode initialized!

MSMHW : 00008141
MODHW : 00000FF9
BUILD : ImSmartS471_22012015
RTIME : Jan 22 201516:00:45
BTIME : Jul 08 201423:00:00
DEVST : BAAAANWZ

Reading NVRAM data in XQCN format ...

Reading NV Items...
Reading NV Items SIM1...
Reading NV Items SIM2...
Reading RFNV...
Reading Provisioning Item Files...
Reading Feature_Mask...

Saved as : I:\QLM\CM2QLM\Backup\QCN\00008141__ImSmartS471_220 12015.xqcn
Read Done!Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 2x/4x|00 [MSM8x12]
ID_BLOCK_S : 08B39427
ID_BLOCK_L : BC443ED877E3E81BC4B95B4483DE5676
ID_BLOCK_L : 6EE5AB02F79EC04578B718D1D3D2CC0F
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8x10 , FLASH : eMMC , mVER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000/00000000
Boot Ok!

Backup Security Partitions
Backup : FSG
Backup : MODEMST1
Backup : MODEMST2
Backup saved to : I:\QLM\CM2QLM\Backup\MSM8x10_[008140E1]_08B39427_SEC\

Done!