RIFF Box V2

[Nicolayer]

встречаем второе поколение бокса


http://s020.radikal.ru/i718/1608/a5/fc10093d0472.jpg
http://s019.radikal.ru/i638/1608/62/f6bcac1be215.jpg


RIFF BOX v2 H/W Specification

Dual-core Cortex-M4 MCU @ 204MHz;
PC to Box USB (Device) Speed: Hi-Speed (480 Mbps);
Box to Device (Host) Speed: Full-Speed (48 Mbps);
SD/MMC Interface with 1-Bit (DAT0) and 4-Bit (DAT0-DAT3) Bus Width support and SD_CLK up to 52 MHz;
UART Interface;
RIFF™ Smart Probing Feature;
Level-adjustable 23 GPIO Lines (1.65V to 3.6V) for interfacing a range of devices and protocols, such as NAND, SPI, I2C, Pin Finder, etc.;
4 fixed 3.3V GPIO Lines;

RIFF BOX v2 Interface Specification

20-Pin Male Connector:
JTAG Interface: TRST, TDI, TMS, TCK, RTCK, TDO and NRST;
SWD (Serial Wire Debug) Interface: SWCLK, SWDIO (SWDIO and SWCLK are overlaid on the TMS and TCK pins);
30-Pin Male Connector:
SD/MMC Interface 1/4Bit @ 52MHz;
Level-adjustable 23 GPIO Lines (1.65V to 3.6V);
USB Device Connector: connects the Box with PC @ Hi-Speed (480 Mbps), approx. 20 MByte/sec;
USB Host Connector: connects the Box with USB devices @ Full-Speed (48 Mbps), approx. 1.5-2 MByte/sec;
RJ-45 Connector:
RIFF™ Smart Probing Feature;
UART Port;
4 Fixed 3.3V GPIO Lines;

Supported SD/MMD Revisions:

Revisions 1.0 to 1.7 (for MMC: v4.0, v4.1, v4.2, v4.3, v4.41, v4.5, v4.51, v5.0) and higher

Supported JTAG Cores:

ARM7,
ARM920,
ARM926,
ARM946,
ARM7EJS,
ARM11,
CORTEX-A5,
CORTEX-A8,
CORTEX-A9,
CORTEX-A15,
OMAP3430,
OMAP3630,
OMAP4430,
TEGRA2 (CORTEX-A9),
TEGRA2 (ARM7),
QUALCOMM S3 (ARM7, ARM11, SCORPION),
QUALCOMM S4 (ARM7, ARM11, SCORPION),
NOVATHOR,
PXA270,
PXA312
MIPS32™ IR5Bit,
MIPS32™ IR8Bit,

RIFF Box v2 software:

RIFF JTAG Manager
RIFF Remote helper
RIFF Admin client / SN reader
RIFF Box USB drivers

[Nicolayer]

Установка RIFFbox V2


1.на оффициальном сайте (http://www.riffbox.org/category/jtag-downloads/)
ссылки для загрузки
visualC++2005 (у кого не проставлен ещё) и
RiffSetup1.61.exe,
устанавливаем.

2. подключаем бокс и выбираем драйвера,
путь C:\Program Files\Rocker Team\RIFF JTAG Manager\Drivers.

3. запускаем RIFF JTAG Manager 1.61
- заполняем регистрацию,
- на последней вкладке менеджера идём на саппорт.

4. скачиваем и устанавливаем
- RIFF JTAG Manager 1.62,
- обновляем прошивку бокса.

5. качаем документы, плагины, DLL (и проч.).