Alex77
22.11.2015, 07:33
Alcatel OT-5017D не получается разблокировать. NCK Dongle не смог разблокировать ни кодом ни кабелем. Других программаторов нет на этот счет. Заказом NCK на ou5oq тоже не получилось.
На борту прошивка 5.1
вот лог донгла
Exe version: NCKDongle AndroidMTK 2.5.6.0
Selected phone: OT-5017D
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM19)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6735M_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x513732534d42
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 150100513732534D : 0000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : DA USB VCOM Port (COM125)
Block Size: 512
MODEL FROM PROINFO: 5017D-2ABGRU1
SECRO FROM PROINFO: X1B0CC01BP20
IMEI marker was found in nvram
IMEI[1] from NVRAM: 45f5090d0e1e56a
If this phone have OTP IMEI, this is normal.
IMEI[2] from NVRAM: 45f5090d0e1e56a
If this phone have OTP IMEI, this is normal.
Reading security, wait...
ReadbackPartitionToBuffer() failed!(3).
Error: S_FT_READBACK_FAIL
Data not found[1], aborting...
All done.
На борту прошивка 5.1
вот лог донгла
Exe version: NCKDongle AndroidMTK 2.5.6.0
Selected phone: OT-5017D
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM19)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6735M_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x513732534d42
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 150100513732534D : 0000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : DA USB VCOM Port (COM125)
Block Size: 512
MODEL FROM PROINFO: 5017D-2ABGRU1
SECRO FROM PROINFO: X1B0CC01BP20
IMEI marker was found in nvram
IMEI[1] from NVRAM: 45f5090d0e1e56a
If this phone have OTP IMEI, this is normal.
IMEI[2] from NVRAM: 45f5090d0e1e56a
If this phone have OTP IMEI, this is normal.
Reading security, wait...
ReadbackPartitionToBuffer() failed!(3).
Error: S_FT_READBACK_FAIL
Data not found[1], aborting...
All done.