PDA

Просмотр полной версии : ищу прошивку для u800 u80rxxhj1


Alva
08.05.2009, 17:15
Собственно, в поиске такой прошивки для U800 u80rxxhj1
Необходимо было порусить аппарат, в итоге не шьется rsrc2
Почитал и понял, что надо или вернуть родную прошивку, в данном случае стояла такая u80rxxhj1 (хотя на стикере на плате написано xxhj1) или писать загрузчик, но это крайняя мера

Tiburon
08.05.2009, 21:22
или писать загрузчик, но это крайняя мера
А что в этом страшного!?
Не так много было этих телефонов,но шил всегда вместе с бутом и никогда (тьфу-тьфу-тьфу =) ) проблем не было.

Alva
08.05.2009, 21:49
вот что сказал Elco от 09 Января

1. You cant kill the phone with NsPro.
Simply because NsPro dont support boot writing on that phone.
And the phone can be killed only by writing wrong boot on it.

As long the phone enter in download mode, the phone is not "dead"

You can repair the phone by flashing it with a different firmware.

You can get such flashing problems only when you try to write a debranded firmware on some vodafone branded phones.

There are 2 solutions:
-the safe solution: flash the phone back with the branded firmware
-the dangeuros solution: write boot files from unbranded firmware with multiloader, to phone then flash the phone with unbranded firmware.
Writing boot on qualcomm phones is very dangeuros and can easely brick your phone if the new boot is incompatible with the old boot existing on phone.
And there is no way to check if the boot files are compatible or not before writing to phone

Alva
09.05.2009, 13:20
ситуация решилась так:
miltiloader 5.56
Сначала только запись бута из русской прошивки
Затем уже прошивка.
Телефон включился, звонит, но смущает что при проверке серийника выдает imei not active