shirokov
21.10.2005, 00:35
Список известных на сегодняшний день кодов ошибок, выдаваемых USB-Smart (думаю, что и PBB, аналогично).
Предлагаю расширить список, если Вам удастся встретить нечто новое.
---------------
ERROR: 303106: You have different flash files versions…Correct this little mistake and try again
---------------
ERROR: 30353B: You have tried to flash the three flash files (Main, Fs, Sfa). Flash only= TWO flash files and later if you want you can flash Sfa file in the phone only.
---------------
ERROR: 300314: This Error is appears when you have a V600(maybe any phone) with CID’s mismatch. Flash Erom with CID36 from support area for that phone. Also as a suggestion flash with main and fs file after Erom for better result.
---------------
ERROR: 003608, ERROR: 00360C & ERROR: 00360C: This errors where showed when the phone had the RSA killed by Twister or Terminator
---------------
ERROR: 304314: This error appears when you are using flash files with CID lower than in OTP. You must use equal or higher.
---------------
ERROR: 0001A1: Possibly problem due to cable with bad connection. Check the cable or buy a new one
---------------
ERROR: 00A405: This problem happens when you have communication/timers problem check that the cable is working and post a thread telling the exactly error if still happening. Problem related to T100. It’s impossible to clear SP locks in this phone.
---------------
ERROR: 300301: Bug found in v1.1 in Sony Ericsson z1010, support with CID16. Problem already solved
---------------
ERROR: 304107 & ERROR: 304106: Recover Certificate Problems
---------------
ERROR: 303002: This problem appeared when you are trying to Complete the phone alter flash. This error should be already solved. Occurred in v1.7
---------------
ERROR: 304100: This error appears when we are trying to flash a phone that’s empty. This will be solved in a short period of time. In Z1010 phones with CID16 we had this bug corrected already in v1.9
---------------
ERROR: 302403: This was a bug corrected in v3.1 so if you have seen this error download last exe. Also this error appeared in v2.0 reading flash files bug was fixed
---------------
ERROR: 300314: Problem when trying to unlock V600 in v1.7/1.9 fixed on newer versions.
---------------
ERROR: 003612: Use another cable T28 com cable doesn’t work in AVR phones
---------------
ERROR NETWORK CONTACT: You have to Complete phone
---------------
Предлагаю расширить список, если Вам удастся встретить нечто новое.
---------------
ERROR: 303106: You have different flash files versions…Correct this little mistake and try again
---------------
ERROR: 30353B: You have tried to flash the three flash files (Main, Fs, Sfa). Flash only= TWO flash files and later if you want you can flash Sfa file in the phone only.
---------------
ERROR: 300314: This Error is appears when you have a V600(maybe any phone) with CID’s mismatch. Flash Erom with CID36 from support area for that phone. Also as a suggestion flash with main and fs file after Erom for better result.
---------------
ERROR: 003608, ERROR: 00360C & ERROR: 00360C: This errors where showed when the phone had the RSA killed by Twister or Terminator
---------------
ERROR: 304314: This error appears when you are using flash files with CID lower than in OTP. You must use equal or higher.
---------------
ERROR: 0001A1: Possibly problem due to cable with bad connection. Check the cable or buy a new one
---------------
ERROR: 00A405: This problem happens when you have communication/timers problem check that the cable is working and post a thread telling the exactly error if still happening. Problem related to T100. It’s impossible to clear SP locks in this phone.
---------------
ERROR: 300301: Bug found in v1.1 in Sony Ericsson z1010, support with CID16. Problem already solved
---------------
ERROR: 304107 & ERROR: 304106: Recover Certificate Problems
---------------
ERROR: 303002: This problem appeared when you are trying to Complete the phone alter flash. This error should be already solved. Occurred in v1.7
---------------
ERROR: 304100: This error appears when we are trying to flash a phone that’s empty. This will be solved in a short period of time. In Z1010 phones with CID16 we had this bug corrected already in v1.9
---------------
ERROR: 302403: This was a bug corrected in v3.1 so if you have seen this error download last exe. Also this error appeared in v2.0 reading flash files bug was fixed
---------------
ERROR: 300314: Problem when trying to unlock V600 in v1.7/1.9 fixed on newer versions.
---------------
ERROR: 003612: Use another cable T28 com cable doesn’t work in AVR phones
---------------
ERROR NETWORK CONTACT: You have to Complete phone
---------------